Lathe Accessories - Chucks

Category Chucks has 234 product(s):

Jacobs Chuck 30354 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle
Hian-Tite design features a non-rusting, high performance body with an elastomeric sure-grip sleeve for maximum user comfort and hand tightening efficiency... [read more]   [read 15 reviews and see ratings]

Jacobs Chuck 30247 3/8-Inch Keyed Chuck for 3/8-Inch 24 Thread Spindle with Key
No... [read more]   [read 10 reviews and see ratings]

Jacobs Chuck 30602 1/2-Inch Keyed Chuck
No... [read more]   [read 24 reviews and see ratings]

PORTER-CABLE 44025 Quick Change 1/4-Inch Drive 1/4-Inch Hex Chuck
Porter Cable 44025 Quick Change 1/4-Inch Drive 1/4-Inch Hex Chuck... [read more]   [read 1 reviews and see ratings]

Panasonic EY9795B 3/8-Inch Keyless Chuck
This keyless chuck will fit any cordless drill and has a capacity of 3/8-inch... [read more]   [read 4 reviews and see ratings]

Grizzly G8783 4-Jaw Chuck For Round Piece s, 3/4-Inch by 16 TPI
Perfect for bowl turning, the jaws of this chuck grip round stock as well as expand within a recess turned in the back of the workpiece... [read more]   [read 3 reviews and see ratings]

Steelex D1090 Chuck for Wood Lathe, 3-Jaw
This 3-jaw chuck is a self-centering style, used mostly for round work... [read more]   [read 4 reviews and see ratings]

Grizzly G9823 8-Inch 3-Jaw Scrol Length Chuck D1-6
These direct mount chucks come with the studs in the back and fit directly into your lathe cam-lock... [read more]   [read 1 reviews and see ratings]

Grizzly G9828 3-Inch 3-Jaw Plain Back Scrol Length Chuck
These 3-jaw, self centering chucks feature semi-steel bodies with plain backs... [read more]

Grizzly G9830 5-Inch 3-Jaw Plain Back Scrol Length Chuck
These 3-jaw, self centering chucks feature semi-steel bodies with plain backs... [read more]   [read 1 reviews and see ratings]

Grizzly G9834 5-Inch 4-Jaw Plain Back Scrol Length Chuck
"Scroll" means that all jaws close together are self centering... [read more]   [read 1 reviews and see ratings]

Grizzly G9819 6-Inch 3-Jaw Scrol Length Chuck D1-4
These direct mount chucks come with the studs in the back and fit directly into your lathe cam-lock... [read more]   [read 1 reviews and see ratings]

Steelex D1089 Chuck for Wood Lathe, 4-Jaw
This an independent-type 4-jaw chuck that is used for square and odd-shaped pieces... [read more]   [read 8 reviews and see ratings]

Makita 763132-1 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle
Makita 763132-1 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle... [read more]   [read 1 reviews and see ratings]

Makita 763415-9 Chuck Key, DA301DW
Chuck key for the model DA301 right angle drill... [read more]   [read 1 reviews and see ratings]

Makita 763414-1 Chuck Key, DA3000, DA3000R
Chuck key for the model DA3000 and DA3000R right angle drills... [read more]   [read 5 reviews and see ratings]

Vermont American 14907 1/4-Inch and 3/8-Inch Chuck Key with 1/4-Inch Pilot
Vermont American offers a variety of chucks, keys and accessories designed to fit all popular drills.... [read more]   [read 1 reviews and see ratings]

Metabo 636520000 1/16-Inch-1/2-Inch Futuro Plus Double Sleeve Reversible Keyless Chuck
Metabo 636520000 1/16-Inch-1/2-Inch futuro plus double sleeve reversible keyless chucks... [read more]   [read 4 reviews and see ratings]

Metabo 636620000 1/16-Inch - 1/2-Inch Futuro Plus Double Sleeve Reversible Keyless Chuck
Metabo 636620000 1/16-Inch - 1/2-Inch futuro plus double sleeve reversible keyless chuck... [read more]   [read 1 reviews and see ratings]

JACOBS MANUFACTURING CO Heavy Duty Taper Mounted Chuck With Key - Capacity: 1/8"- 5/8"
Fluted sleeve standard except on models #0, #1A, #34-33C, #OB-5/16 and #1B-3/8, which are smooth and ground... [read more]   [read 1 reviews and see ratings]

Chuck Key
Chuck Key, Pilot Size (In.) 9/32, Used On DCB, SM8, 74K, 22BA, 23BA, 24BA, 26BA, 29-33, 30052, Chuck Key Size KK Chuck KeysHandles are constructed of soft steel to reduce fracture risk under excessive loads... [read more]   [read 1 reviews and see ratings]

PHASE II 8"Horizontal & Vertical Table
A convenient method of worm adjustment is provided to compensate for wear... [read more]   [read 1 reviews and see ratings]

Metabo 635035000 1/16-Inch-1/2-Inch Keyed Drill Chuck
Metabo 635035000 1/16-Inch-1/2-Inch keyed drill chuck... [read more]   [read 2 reviews and see ratings]

Panasonic EY9X003E 1/2-Inch Attachable Keyless Chuck for EY6535 only.
Panasonic Attachable 1/2-Inch Keyless Chuck for EY6535 only.... [read more]   [read 1 reviews and see ratings]

Grizzly H6267 4 Jaw Wood Chuck, 1-1/4-Inch x 8-Inch
This 4-jaw self-centering chuck with dovetailed jaws is great for small bowl and plate turning and features jaws that grip by clamping around the workpiece or expanding to fit a turned recess... [read more]   [read 3 reviews and see ratings]

Milwaukee 48-66-1360 1/2-Inch Keyed Chuck for 1/2-Inch 20 Thread Spindle
This keyed chuck has a 1/2 inch capacity with a 1/2 inch - 20 thread... [read more]   [read 1 reviews and see ratings]

Makita 763423-0 Chuck Key
Makita Chuck Key.... [read more]   [read 3 reviews and see ratings]

Makita 763424-8 Chuck Key (Type 3), 6510LVR
Chuck Key for the model 6510LVR... [read more]   [read 2 reviews and see ratings]

Makita 763102-0 Keyless Chuck, Lock 3/8-Inch, 6201D
Keyless chuck to fit the Makita model 6201... [read more]   [read 1 reviews and see ratings]

SUPERNOVA 2 CHUCK W/2" JAWS, WOODWORM SCREW, AND INSERT
  [read 8 reviews and see ratings]

NOVA 1" x 8 TPI Midi Chuck
Ideal for mini, midi, and smaller lathes or for smaller turnings on a large lathe... [read more]   [read 13 reviews and see ratings]

Bosch 1618571014 SDS-plus Shank 3 Jaw Chuck with Integral
The Bosch 1/2-inch by 6-1/4-inch by 2 5/32-inch black metal SDS adapter chuck is designed for use with Bosch SDS-Plus hammer drills... [read more]   [read 44 reviews and see ratings]

SUPERNOVA 2 CHUCK WITH 4 JAW SETS AND ACC
Why this combination? The 2" jaws are a given (they come with the chuck!)... [read more]   [read 2 reviews and see ratings]

Black & Decker U1508 Chuck Key 1/4-Inch Pilot, 1/2-Inch
Key tightens or unlocks specific size manual chucks... [read more]   [read 1 reviews and see ratings]

1 1/4 - 8 TPI - STRONGHOLD CHUCK PACKAGE
###############################################################################################################################################################################################################################################################... [read more]   [read 10 reviews and see ratings]

Milwaukee 48-66-3480 Chuck Key for Chuck 48-66-2100
This chuck key tightens the jaws of the 1/2 inch capacity chuck 48-66-2100... [read more]   [read 1 reviews and see ratings]

Milwaukee 48-66-3350 Chuck Key
For use with Chuck Kit 49-22-1560... [read more]   [read 1 reviews and see ratings]

Oneway 1" X 8 TPI - Talon Chuck Package
The TALON Chuck has a small body diameter and only weighs 3.5 lbs making it the perfect choice for small to medium sized lathes... [read more]   [read 1 reviews and see ratings]

1 - 8 TPI - ONEWAY CHUCK PACKAGE
The original ONEWAY Chuck has a medium sized body diameter and weighs 4.5 lbs making it the perfect choice for small to medium sized lathes... [read more]   [read 1 reviews and see ratings]

Grizzly H7605 4 Jaw Chuck, 3-Inch
This self-centering style 4-jaw chuck has reversible stepped jaws for holding a variety of round or square work piece sizes... [read more]   [read 13 reviews and see ratings]

NOVA G3 WOODLATHE CHUCK WITH 2" JAWS, WOODWORM SCREW, & INSERT
  [read 1 reviews and see ratings]

SUPERNOVA 2 CHUCK W/2" JAWS, WOODWORM SCREW, AND INSERT & 45MM SPIGOT JAW SET
Nova has reworked the extremely popular Supernova chuck, and reintroduced it as the Supernova 2... [read more]   [read 4 reviews and see ratings]

Snappy 42024 Drill Adaptor, 3/8
Highlights: Size: 3/8 Convert standard drill bits hex power bits Fits all standard & specialty round shank bits, cobalt bits, brad point bits, & masonry bits Each adapter accepts a range of sizes Standard hex shank fits all power bit quick change chucks Use in metal, wood, or plastic... [read more]   [read 2 reviews and see ratings]

Supernova 2 Chuck Kit with 2" Jaws, 4" Powergrip Jaws, Woodworm Screw
Nova has reworked the extremely popular Supernova chuck, and reintroduced it as the Supernova 2... [read more]   [read 3 reviews and see ratings]

PSI Woodworking LA3318 Headstock Spindle Adapter (M33 x 3.5 tpi to 1-Inch x 8tpi chuck)
Converts your lathe spindle so that you can use a chuck with a different thread size... [read more]   [read 4 reviews and see ratings]

PSI Woodworking LA341018 Headstock Spindle Adapter (3/4-Inch x 10tpi to 1-Inch x 8 tpi chuck)
Converts your lathe spindle so that you can use a chuck with a different thread size... [read more]   [read 24 reviews and see ratings]

PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
8" flat jaws used for finishing bowl bottoms when attached to a Barracuda scroll chuck... [read more]   [read 46 reviews and see ratings]

PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center
Get a better bite on your spindle with PSI's new 5/8" Super Center ... [read more]   [read 53 reviews and see ratings]

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System
One of the easiest to use, best value chucks on the market... [read more]   [read 85 reviews and see ratings]

PSI Woodworking LA11418 Headstock Spindle Adapter (1-1/4-Inch-by-8tpi to 1-Inch-by-8tpi Chuck)
The PSI Woodworking LA11418 Headstock Spindle Adapter converts your lathe spindle so that you can use a chuck with a different thread size... [read more]   [read 35 reviews and see ratings]

PSI Woodworking LA11218 Headstock Spindle Adapter (1-1/2-Inch-by-8tpi to 1-Inch-by-8tpi Chuck)
Converts your lathe spindle so that you can use a chuck with a different thread size... [read more]   [read 1 reviews and see ratings]

PSI Woodworking LCENTSS22 No. 2 MT with 1-Inch Crown Super Wood Lathe Drive Center
Get a better bite on your spindle with PSI's new 1' Super Center... [read more]   [read 56 reviews and see ratings]

PSI Woodworking LCENTLT2X MT #2 Wood Lathe Live Center
Fine tuned live center for all lathes equipped with #2 MT tailstocks... [read more]   [read 31 reviews and see ratings]

PSI CSC2000C Barracuda Wood Lathe Chuck System
This lever operated and powerful self-centering workhorse is the charter member of the Barracuda family... [read more]   [read 62 reviews and see ratings]

PSI Woodworking CJAWFJ1 Small Flat Lathe Chuck Jaws
The Barracuda scroll lathe chuck from PSI Woodworking has jaws that open to accommodate a 5-inch bowl, and it's designed to allow you to finish bowls so it's ideal for turning bowl bottoms... [read more]   [read 6 reviews and see ratings]

PSI Woodworking LAG1218 Headstock Spindle Adapter (1-Inch-by-12 tpi to 1-Inch-by-8 tpi Chuck)
Converts your lathe spindle so that you can use a chuck with a different thread size... [read more]   [read 7 reviews and see ratings]

PSI Woodworking L5818 Headstock Spindle Adapter (Shopsmith 5/8-Inch to 1-Inch 8tpi chuck)
Converts your Shop Smith lathe spindle so that you can use chucks with a 1" x 8 tpi thread size... [read more]   [read 27 reviews and see ratings]

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT
4 piece Center Set contains hard to find replacement centers for wood lathes equipped with a #2 MT headstock and tailstock... [read more]   [read 13 reviews and see ratings]

PSI Woodworking CSC500 Barracuda Micro Lathe Chuck System
Here is the Baracuda 3 full-featured and complete 4-jaw chuck system in a small package... [read more]   [read 10 reviews and see ratings]

PSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock Center
Heavy duty #2MT live tailstock center with a 60 degree point... [read more]   [read 90 reviews and see ratings]

Skil 92170 1/4" Keyless Chuck
92170 Features: -Keyless chuck.-Carded... [read more]   [read 18 reviews and see ratings]

Steelex D3607 4-Inch 3-Jaw Chuck
These 4-Inch 3-Jaw Chucks are made from precision ground components, have a plain back mounting configuration and include two sets of jaws and mounting bolts... [read more]   [read 3 reviews and see ratings]

Grizzly H8049 6-Inch 4-Jaw Wood Chuck, 1-Inch by 8 TPI
Independently adjustable jaws hold odd shaped work... [read more]   [read 10 reviews and see ratings]

Grizzly H8048 6-Inch 4-Jaw Chuck, 3/4-Inch by 16 TPI
Independently adjustable jaws hold odd shaped work... [read more]   [read 6 reviews and see ratings]

Grizzly H8044 6-Inch 3-Jaw Wood Chuck, 3/4-Inch by 16 TPI
Hold round stock securely with this 3-Jaw Chuck... [read more]   [read 2 reviews and see ratings]

Grizzly H8038 5-Inch 3-Jaw Wood Chuck, 1-Inch by 8 TPI
Synchronized jaws tighten at the same time and are self-centering... [read more]   [read 2 reviews and see ratings]

Grizzly H8042 4-Jaw Wood Chuck, 5-Inch
Four reversible jaws hold square stock securely... [read more]   [read 5 reviews and see ratings]

Grizzly H8032 3-Inch 3-Jaw Wood Chuck, 5/8-Inch Unthreaded
Jaws tighten at the same time and they're reversible... [read more]   [read 1 reviews and see ratings]

Grizzly H8047 6-Inch 4-Jaw Wood Chuck, 5/8-Inch Unthreaded
Independently adjustable jaws hold odd shaped work... [read more]   [read 2 reviews and see ratings]

PSI Woodworking CSC3000CTN Barracuda 2 Special Edition T/N, 12 Piece Lathe Chuck System
The PSI Woodworking CSC3000CTN Barracuda 2 Special Edition T/N, 12 Piece Lathe Chuck System is comprised of 12 pieces beautifully packaged in a compact blow molded case... [read more]   [read 18 reviews and see ratings]

Makita 763198-1 Keyless Chuck
Keyless Chuck 1/4-Inch Hex.6916Fd... [read more]   [read 40 reviews and see ratings]

Ryobi 4130271 1/2 inch Keyless Chuck
Ryobi 4130271 1/2 inch Keyless Chuck... [read more]   [read 1 reviews and see ratings]

MAKITA Chuck Key, 601D,6002D,6010D,6012HD,6041DW,6071D,6073D Part No.763419-1
MAKITA Chuck Key, 601D,6002D,6010D,6012HD,6041DW,6071D,6073D Part No.763419-1... [read more]   [read 7 reviews and see ratings]

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck
This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside... [read more]   [read 7 reviews and see ratings]

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System
Here is the Baracuda 3 full-featured and complete 4-jaw chuck system in a small package... [read more]   [read 7 reviews and see ratings]

Proxxon 27026 Three Jaw Chuck for the Lathe DB 250
Proxxon precision three jaw chuck redesigned to be used with DB250 number 37020 micro woodturning lathe... [read more]   [read 5 reviews and see ratings]

Fein Bolts for MSXE-636-2VSXL MultiMaster Tool
Fein Bolts for MSXE-636-2VSXL MultiMaster Tool... [read more]   [read 1 reviews and see ratings]

Proxxon 27024 4-Jaw Chuck for Micro Wood Turning Lathe DB 250
Proxxon German precision engineered independent four jaw chuck for use with DB250, 37020 micro wood turning lathe used to clamp asymmetrical pieces such as rectangles... [read more]   [read 4 reviews and see ratings]

1-3mm Pin Chuck 3-piece Set
Here's 3 Of The Most-used Chuck Sizes Complete In A Set... [read more]   [read 1 reviews and see ratings]

Jacobs 33370 JK 160 J6 Industrial Grade Keyless Chuck 3.0 to 16.0 Millimeter Capacity with No.6 Jacobs Taper Mount
This Jacobs JK 160-J6 Industrial keyless chuck is designed for industrial use (medium duty), available with screw fittings for professional portable drilling machines and with taper fitting for stationary drilling machines... [read more]   [read 1 reviews and see ratings]

1/2'' Drill Chuck (Morse Tapers Sold Separately)
1/2" drill chuck for lathe is compatible with two choices of morse tapers... [read more]   [read 2 reviews and see ratings]

#1 Morse taper for Drill Chuck (Chuck Sold Separately)
1/2" drill chuck for lathe is compatible with two choices of morse tapers... [read more]   [read 2 reviews and see ratings]

#2 Morse taper for Drill Chuck (Chuck Sold Separately)
1/2" drill chuck for lathe is compatible with two choices of morse tapers... [read more]   [read 1 reviews and see ratings]

GOLDENROD® Suction Guns - 56544 suction gun
250-350 Features: -Capacity Vol.: 3/4 pt [Max].-Outside Diam: 1 1/2 in.-Outlet Type: Hose/Coupler.-Drive Type: Manual Pull.-Designated Fluid: Grease.-Type: Suction Gun.-Price is for 1 Each... [read more]   [read 1 reviews and see ratings]

T-Handle Chuck Keys - k1 chuck key
403-3641 Features: -Soft steel handles.-Precision crafted.-Handle Type: T-Handle.-Type: Key.... [read more]   [read 2 reviews and see ratings]

Oneway Talon Chuck System
This is an ideal chuck for mini and mid-size lathe owners who want a power-grip, key-operated chuck... [read more]   [read 7 reviews and see ratings]

Jacobs Chuck 0085205 CAT V 40 Shell/ Face Mill Tool Holder 1-Inch Diameter with 4-Inch Projection
The Jacobs CAT V 40 Shell/Face mill tool holder is designed to hold up to a 1-Inch shank cutting tool... [read more]   [read 1 reviews and see ratings]

Proxxon 27028 Drill Chuck with Sliding Sleeve for Tailstock of DB 250
Proxxon drill chuck for the tailstock for the DB250, number 37020 micro woodturning lathe... [read more]   [read 3 reviews and see ratings]

Chuck Sleeve for M12V Size: 1/2" x 1/4"
956927Z Size: 1/2" x 1/4" Features: -Available in 1/2'' x 3/8'', 1/2'' x 1/4''... [read more]   [read 1 reviews and see ratings]

Sunex 8737 3/8-Inch Drive 4-Way Chuck Key
Sunex 3/8-Inch 4 Way Chuck Key opens 86 different chucks.... [read more]   [read 5 reviews and see ratings]

CKG - CRL Chuck Key for Jacobs "G" 1/4" Chuck
This CRL Chuck Key fits Jacobs Chuck Models: Jacobs Model "G", Rigid/Supreme Models; B1A, BM1A, B80A, BM80A, B80J and PB1A; Craftsman 1/4 and 3/8 inch (6.4 and 9.5 millimeter)... [read more]   [read 2 reviews and see ratings]

Nova Soft Jaws
Now you will no longer have to match your project to a fixed dimension jaw set! Instead, you can quickly and easily design one-of-a-kind jaw sets to fit your special project needs... [read more]   [read 4 reviews and see ratings]

#1 Spigot Jaws for ONEWAY Talon Chuck
OneWay #1 Spigot Jaws are for use with OneWay Talon chuck... [read more]   [read 3 reviews and see ratings]

Stronghold Jumbo Jaws
Oneway Stronghold Jumbo Jaws are designed to re-chuck bowls and plates up to 12" in diameter for complete "bottom finishing." The 8 rubber grippers cushion holds your workpiece during light finish turning and sanding operations... [read more]   [read 1 reviews and see ratings]

#3 Jaws for ONEWAY Talon Chuck
The #3 Jaws for OneWay Talon Chucks are designed for bowls, vessels and platters... [read more]   [read 2 reviews and see ratings]

1-1/4"-8 TPI RH Insert
Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from the Compac)... [read more]   [read 10 reviews and see ratings]

1/2'' Morse Taper 2 Mt2 Lathe Drill Chuck Plus Key New
New in the box MT2 Drill chuck and Key.nnDistributed by Harbor Freight Tools.nnMade in China... [read more]   [read 2 reviews and see ratings]

Sunex 8727 1/2-Inch Drive 4-Way Chuck Key
Sunex 1/2-Inch 4 Way Chuck Key opens 127 different chucks.... [read more]   [read 1 reviews and see ratings]

Mini Jumbo Jaws for ONEWAY Talon Chuck
The Mini Jumbo Jaws are designed to re-chuck bowls and plates for complete bottom finishing." The 8 rubber grippers cushion and hold your workpiece (up to 9-7/8" dia.) during light finish turning and sanding operations.... [read more]   [read 5 reviews and see ratings]

Oneway 2159 Mega Jumbo Jaws for Stronghold Chuck
For light finishing of the backs of bowls and external chucking on platters and picture frames... [read more]   [read 2 reviews and see ratings]

Jaws, #1
Oneway Stronghold #1 Jaws for holding small work... [read more]   [read 2 reviews and see ratings]

Delta Industrial 46-461 Reversible Nova G3-D Woodturning Chuck
Includes Reversible NOVA G3-D Woodturning Chuck - 46-461.... [read more]   [read 21 reviews and see ratings]

Expanding Collet Chuck #1 MT Spindle
This compact, expanding chuck is useful for turning small projects such as pocket watch cases, bowls, game pieces and more... [read more]   [read 1 reviews and see ratings]

#2 MT 1/2" Keyed Chuck
This 1/2" keyed Chuck has a #2 Morse taper... [read more]   [read 1 reviews and see ratings]

Expanding Collet Chuck 3/4" x 16 tpi
This compact, expanding chuck is useful for turning small projects such as pocket watch cases, bowls, game pieces and more... [read more]   [read 1 reviews and see ratings]

1" x 8 TPI Insert
This threaded insert will fit the WoodRiver Turning Chuck... [read more]   [read 2 reviews and see ratings]

3/4 x 16 TPI Self-Centering 4-Jaw Chuck
Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck... [read more]   [read 2 reviews and see ratings]

1" x 8 TPI Self-Centering 4-Jaw Chuck
Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck... [read more]   [read 3 reviews and see ratings]

#1 Jaws for Chuck
WoodRiver Turning Chuck #1 Jaws for smaller work... [read more]   [read 1 reviews and see ratings]

Jaws, #3
Oneway Stronghold #3 Jaws for bowls, vessels and platters... [read more]   [read 1 reviews and see ratings]

Nova Pin Jaw Set
Nova Pin Jaws operate like a pin chuck but without the hassles! An extended 25mm (1") length cylindrical jaw expands into a 25mm (1") or larger hole and grips the workpiece like a traditional pin chuck... [read more]   [read 8 reviews and see ratings]

Jaw Fastening Spares Kit
Replacement jaw fastening screws for the SuperNova2 chuck... [read more]   [read 1 reviews and see ratings]

130mm Jumbo Jaws
The 130mm Jumbo Jaws are for holding large bowls and platters... [read more]   [read 4 reviews and see ratings]

45mm Spigot Jaw Set
Nova jaw sets add even greater versatility to the Nova Midi, SuperNova2 and Nova Titan chucks... [read more]   [read 2 reviews and see ratings]

Nova Jaw Set, 25mm
The 25mm Jaw Set substitutes for the standard 50mm jaws for use on small work with 3/8"-1-1/4" spigots, as a type of pin chuck with 1" capacity, for expanding dovetail work on bowls up to 6" dia... [read more]   [read 4 reviews and see ratings]

SuperNova Power Grip Jaws
SuperNova PowerGrip Jaws are precision machined from a high quality solid steel billet... [read more]   [read 3 reviews and see ratings]

Hold Fast 3" Vacuum Chuck Kit 1" x 8 TPI
More and more often turners are solving difficult workpiece holding problems by using vacuum chucking... [read more]   [read 1 reviews and see ratings]

Hold Fast 3" Vacuum Chuck Kit 1-1/4" x 8 TPI
More and more often turners are solving difficult workpiece holding problems by using vacuum chucking... [read more]   [read 3 reviews and see ratings]

100mm Jaw Set
Nova jaw sets add even greater versatility to the Nova Midi, SuperNova2 and Nova Titan chucks... [read more]   [read 3 reviews and see ratings]

NOVA G3 Chuck Without Threaded Insert
Designed for mini, midi and smaller lathes with up to a 14" diameter swing, this chucks small size and weight minimizes the load on smaller spindles and bearings and provides powerful performance for its size! Built to the same standards as the SuperNova2 and Titan chucks... [read more]   [read 1 reviews and see ratings]

Mini Cole Jaw Set
Mini Cole Jaw Set is for the SuperNova 2, G-3 and the Midi Chuck... [read more]   [read 8 reviews and see ratings]

Stronghold Chuck, 1-1/4" x 8 TPI
Never again will you feel like you need three hands to tighten your workpiece in a woodturning chuck! Using a unique chuck and key system, the Stronghold allows you to hold your workpiece in one hand and tighten/loosen the chuck jaws with the other! In addition to one handed key operation, this chuck offers the finest engineering and the most precise machining we have seen... [read more]   [read 1 reviews and see ratings]

TEKNATOOL SUPERNOVA 2 CHUCK W/2" JAWS & WOODWORM SCREW (SUPERNOVA2)
The newest evolution of the classic Nova Chuck is finally available - the SuperNova2! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances... [read more]   [read 23 reviews and see ratings]

50mm Face Plate Ring
Face Plate Rings - when you want an extra solid grip on your work... [read more]   [read 1 reviews and see ratings]

Long Nose Jaw Set
Nova jaw sets add even greater versatility to the Nova Midi, SuperNova2 and Nova Titan chucks... [read more]   [read 1 reviews and see ratings]

75mm Bowl Jaw Set
Nova jaw sets add even greater versatility to the Nova Midi, SuperNova2 and Nova Titan chucks... [read more]   [read 3 reviews and see ratings]

Threaded Adapter, 1-1/4" - 8
Stronghold Threaded Adapters allow maximum versatility! Each Stronghold Chuck has a removable threaded adapter... [read more]   [read 1 reviews and see ratings]

3/4" x 16 TPI ONEWAY Talon Chuck
Designed for smaller lathes, this new chuck from Oneway Manufacturing is loaded with features... [read more]   [read 1 reviews and see ratings]

Extra Screw Chuck
Extra Screw Chuck - 19mm (3/4") long, RH.... [read more]   [read 1 reviews and see ratings]

1" x 8 TPI ONEWAY Talon Chuck
Designed for smaller lathes, this new chuck from Oneway Manufacturing is loaded with features... [read more]   [read 4 reviews and see ratings]

Cole Stops and Screws, Extra (8)
Replacement stops and screws for Teknatool Cole Jaw Sets... [read more]   [read 1 reviews and see ratings]

1" X 8TPI INSERT FOR NOVA CHUCKS (Most Common)
Teknatool uses an easy and inexpensive insert/adaptor system on all its Nova chucks (apart from the Compac)... [read more]   [read 19 reviews and see ratings]

NOVA G3 WOODLATHE CHUCK WITH 2" JAWS, WOODWORM SCREW, & 1" X 8TPI INSERT
The latest addition to the Nova Chuck line... [read more]   [read 22 reviews and see ratings]

NOVA G3 Chuck With 3/4"- 16 Insert Kit
Designed for mini, midi and smaller lathes with up to a 14" diameter swing, this chucks small size and weight minimizes the load on smaller spindles and bearings and provides powerful performance for its size! Built to the same standards as the SuperNova2 and Titan chucks... [read more]   [read 2 reviews and see ratings]

Nova Precision Midi Chuck with Two Jaw Sets
Ideal for mini, midi, and smaller lathes or for smaller turnings on a larger lathe... [read more]   [read 5 reviews and see ratings]

Nova 4 pc Mini Jaw Set
Add even greater versatility to your Nova Midi, Nova G3, Super Nova2 and Nova Titan chucks... [read more]   [read 1 reviews and see ratings]

SUPERNOVA 2 CHUCK W/2" JAWS, 3" BOWL JAWS, AND WOODWORM SCREW
The ever popular Supernova 2 Woodlathe chuck kit, combined with the popular 3" bowl jaws in a kit.nnCheck these specifications:nn * Hard-wearing heavy duty, composite indexing backing plate.n * Captured pinion with rotation arrow... [read more]   [read 1 reviews and see ratings]

Spur Drive Center
This four spur center was designed to be secured in the chuck by the standard 50 mm jaws.... [read more]   [read 3 reviews and see ratings]

Spindle Steady for General/Oneway
Spindle turners have been using steady rests for as long as people have been turning wood for smoother, safer turning of long or thin spindles... [read more]   [read 2 reviews and see ratings]

OneWay Bowl Steady, Powermatic/Woodfast
This item is the clamp block that specifically fits Powermatic 3520/Woodfast lathes for the OneWay Bowl Steady... [read more]   [read 2 reviews and see ratings]

NOVA MIDI CHUCK 1" X 8TPI WITH 2" DOVETAIL AND 8" COLE JAWS
The popular Nova Midi Chuck, here in combination with the 8" Cole Jaws is a perfect combination for most mini lathe users... [read more]   [read 2 reviews and see ratings]

JET 660100KT Milling Accessory Kit
Milling accessory kit... [read more]   [read 1 reviews and see ratings]

6" Wood Lathe Chuck with Key
  [read 1 reviews and see ratings]

Fein 63502128020 Thick Carbide Blade 3 pack
The Fein Grout removal blades are the perfect accessory to be used on the Fein MultiMaster for removing grout , or broken tiles... [read more]   [read 1 reviews and see ratings]

Nova 3" Step Jaw Set
These step jaws are designed primarily to grip in the contracting mode, the base (foot) of footed bowls.nnThe step sizes provide optimum gripping for three foot sizes with minimal crush damaged wood... [read more]   [read 1 reviews and see ratings]

Nova G3 Chuck with Four Jaw Set
This is a great little geared-action chuck, with powerful performance for its size and built to the same standards as the Super Nova and Titan Chucks... [read more]   [read 1 reviews and see ratings]

#3 Jaws for Oneway Scroll Chuck System
No... [read more]   [read 1 reviews and see ratings]

3/4"-16 TPI RH Insert
Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from the Compac)... [read more]   [read 1 reviews and see ratings]

Disston 1/2" Chuck and Key
  [read 1 reviews and see ratings]

Hitachi 307543 3-Jaws 1/4-Inch NSI Hex Adapter Drill Chuck
The Hitachi 307543 1/4-Inch Hex Drive Drill Adapter ensures high precision and durability for heavy-duty tasks... [read more]   [read 1 reviews and see ratings]

Oneway Spindle Steady
Spindle turners have been using steady rests to deal with vibration and flexible materials for as long as people have been turning wood... [read more]   [read 3 reviews and see ratings]

Longworth Chuck 10"
Longworth Chuck 10" --- RMWoodco is now manufacturing a CNC cut Phoenelic Longworth Style Chuck... [read more]   [read 3 reviews and see ratings]

Longworth Chuck 12"
Longworth Chuck 12" --- RMWoodco is now manufacturing a CNC cut Phoenelic Longworth Style Chuck... [read more]   [read 4 reviews and see ratings]

Longworth Chuck 16"
Longworth Chuck 16" --- RMWoodco is now manufacturing a CNC cut Phoenelic Longworth Style Chuck... [read more]   [read 7 reviews and see ratings]

Woodstock D2931 0 to 1/2-Inch B16 Taper Drill Chuck
For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling.... [read more]   [read 6 reviews and see ratings]

Woodstock D3457 Keyless Drill Chuck, 1/2-Inch by JT33
This Keyless Drill Chuck provide extreme accuracy, reliability and ease of use... [read more]   [read 2 reviews and see ratings]

Steelex D3608 5-Inch 3-Jaw Chuck
These 5-Inch 3-Jaw Chucks are made from precision ground components, have a plain back mounting configuration and include two sets of jaws and mounting bolts... [read more]   [read 1 reviews and see ratings]

Steelex D3612 8-Inch 4-Jaw Chuck
These 8-Inch 4-Jaw Chucks are made from precision ground components, have a plain back mounting configuration and include reversible jaws and mounting bolts... [read more]   [read 1 reviews and see ratings]

Woodstock D3754 Small 4-Jaw Chuck with Plate
Use on 3-Inch or 4-Inch rotary table, the chucks are clearly numbered for ease of use.... [read more]   [read 3 reviews and see ratings]

Woodstock D3456 Keyless Drill Chuck, 3/8-Inch by JT2
This Keyless Drill Chuck provide extreme accuracy, reliability and ease of use... [read more]   [read 1 reviews and see ratings]

Steelex D3606 2-Inch 3-Jaw Chuck
This 2-Inch 3-Jaw Micro Chuck is a perfect accessory for small jobs on metal lathes... [read more]   [read 2 reviews and see ratings]

Steelex D3611 6-Inch 4-Jaw Chuck
These 6-Inch 4-Jaw Chucks are made from precision ground components, have a plain back mounting configuration and include reversible jaws and mounting bolts... [read more]   [read 2 reviews and see ratings]

Shop Fox D3609 6-Inch 3-Jaw Self-Centering Chuck
These 6-Inch 3-Jaw Chucks are made from precision ground components, have a plain back mounting configuration and include two sets of jaws and mounting bolts... [read more]   [read 2 reviews and see ratings]

Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI
  [read 6 reviews and see ratings]

Woodstock D4103 Mini Lathe Chuck with Arbors
This 2-Inch diameter 3-jaw mini lathe chuck is a self-centering scroll type chuck with reversible jaws... [read more]   [read 1 reviews and see ratings]

Steelex M1062 4 Jaw Chuck, 8-Inch
Each jaw moves independently... [read more]   [read 2 reviews and see ratings]

Steelex M1058 3 Jaw Chuck, 5-Inch
This 5-Inch 3-jaw, Self-Centering Chuck with a 1.18-Inch bore features semi-steel bodies with plain backs... [read more]   [read 2 reviews and see ratings]

Woodstock D4104 R-8 Quick Change Collet Set, 16-Piece
These high quality collet sets are made in a modern factory in Taiwan using German CNC machines... [read more]   [read 2 reviews and see ratings]

Good Directions FB-4 Copper 26-Inch Fire Bowl with Orion FireDome
Good Directions FB-4 fire bowl is a dramatic conversation piece for the patio or deck that provides a brilliant glow and heats up any outdoor gathering... [read more]   [read 2 reviews and see ratings]

NOVA 48202 G3 Wood Turning Chuck Insert Type
NOVA 48202 G3 Wood Turning Chuck Insert Type is a 4 Jaw self centering geared chuck, suitable for smaller lathes with up to 14-Inch swing... [read more]   [read 8 reviews and see ratings]

NOVA 13055 1-1/4-Inch 8TPI Direct Thread Titan Wood Turning Chuck
NOVA 13055 Titan Wood Turning Chuck 1 1/4-Inch 8TPI Direct Thread is a 4 Jaw self centering geared chuck, suitable for larger lathes with 20-Inch + capacity swing... [read more]   [read 3 reviews and see ratings]

NOVA SuperNOVA2 23055 Wood Turning Chuck Insert Type
NOVA SuperNOVA2 23055 Wood Turning Chuck Insert Type is a 4 Jaw self centering geared chuck, suitable for a wide variety of lathes with up to 20-Inch swing... [read more]   [read 6 reviews and see ratings]

Drill Chuck Keys - JACOB Brand Model No.: K1, Pilot Size: 5/32"
* Soft steel handles limit the potential for dangerous fracturing under excessive load... [read more]   [read 1 reviews and see ratings]

Drill Chuck Keys - JACOB Brand Model No.: K32, Pilot Size: 1/4"
* Soft steel handles limit the potential for dangerous fracturing under excessive load... [read more]   [read 1 reviews and see ratings]

2" 3-jaw Self-centering Lathe Mini Lathe Chuck with 1mt Shank
  [read 1 reviews and see ratings]

LFA INDUSTRIES / Reichel Hardware 0-00309 K0 Replacement Chuck Key-00309, 1/8-Inch Pilot Size, "T" Shaped Handle
LFA / Reichel Hardware 0 Replacement Chuck Key-00309, 1/8-Inch Pilot Size, "T" Shaped Handle, K0.... [read more]   [read 1 reviews and see ratings]

LFA INDUSTRIES / Reichel Hardware 9-00392 K4 Replacement Chuck Key -00392, 3/8-Inch Pilot Size, Thumb Handle
LFA / Reichel Hardware 9 Replacement Chuck Key -00392, 3/8-Inch Pilot Size, Thumb Handle, K4.... [read more]   [read 2 reviews and see ratings]

LFA Industries 322-3/8 0-1/2-0-.13mm Capacity 3/8-24 Threaded Mount Keyless All Steel Ball Bearing with Super Holding Drill Chuck
LFA Industries 322-3/8, Keyless All Steel Ball Bearing with Super Holding Drill Chuck, 0-1/2-0-.13mm Capacity 3/8-24 Threaded Mount.... [read more]   [read 1 reviews and see ratings]

LFA Industries 520-2JT 0-3/8-Inch -.5-10 mm Capacity, 2 Jacobs Taper Mount Keyless All Steel Ball Bearing with Super Holding Drill Chuck
LFA Industries 520-2JT, Keyless All Steel Ball Bearing with Super Holding Drill Chuck, 0-3/8-Inch -.5-10 mm Capacity, 2 Jacobs Taper Mount.... [read more]   [read 1 reviews and see ratings]

Oneway 2593 #2 Taper Safe Driver
Helps teach proper turning technique because a catch or excessive tool pressure stops the spindle from turning.... [read more]   [read 2 reviews and see ratings]

NOVA 48232 G3 Reversible Wood Turning Chuck
NOVA 48232 G3 Reversible Wood Turning Chuck is a 4 Jaw self centering geared chuck, exclusively designed for the NOVA 46000 Comet II Midi Lathe... [read more]   [read 3 reviews and see ratings]

Teknatool SuperNova 2 Woodlathe Chuck (Supernova2) M33X3.5 Direct Thread
The newest evolution of the classic Nova Chuck is finally available - the SuperNova2! Its nickel plated body is made from high grade K1045 steel machined to allow closer tolerances... [read more]   [read 2 reviews and see ratings]

Oneway 2156 #1 Step Jaws for Talon Chuck
For turning small items... [read more]   [read 1 reviews and see ratings]

Oneway 2272 5/8" Grinding Wheel Balancing System
Grinding wheels are sensitive to vibration due to their mass and speed... [read more]   [read 4 reviews and see ratings]

Oneway 2966 Mini Jumbo Jaws for Stronghold Chuck
For light finishing of the backs of bowls and external chucking on platters and picture frames... [read more]   [read 1 reviews and see ratings]

Oneway 3042 Stronghold Body Only Package
If you create large bowls, vessels, and other specialty turnings, you'll find this chuck to be a joy to use... [read more]   [read 1 reviews and see ratings]

Oneway 3941-227 Live Center Adapter 3/4" - 10 To 1" - 8
Adaptors are threaded to screw onto the Oneway Live Center, effectively changing the 3/4 - 10 thread of the Live Center to the same thread as your lathe spindle.... [read more]   [read 1 reviews and see ratings]

Oneway 3941-222 Live Center Adapter 3/4" - 10 To 1-1/4" - 8
Adaptors are threaded to screw onto the Oneway Live Center, effectively changing the 3/4 - 10 thread of the Live Center to the same thread as your lathe spindle.... [read more]   [read 1 reviews and see ratings]

Oneway 3222 #4 Profiled Jaws for Stronghold Chuck
#4 Jaws for Oneway's Stronghold Chuck... [read more]   [read 2 reviews and see ratings]

Oneway 3235 #1 Smooth Spigot Jaws for Stronghold Chuck
For turning small items... [read more]   [read 2 reviews and see ratings]

Oneway 3602 #2 Profiled Tower Jaws for Stronghold Chuck
Machined to a depth of 1-1/4", Tower Jaws are profile shaped to maximize the gripping power and strength necessary for large bowls and vases, while minimizing damage to the piece... [read more]   [read 1 reviews and see ratings]

Oneway 3865 Wolverine Grind 'n Hone Jig (No Base)
Chisels and plane blades will have the sharpest, most uniform edges you've ever had the pleasure to work with - in mere minutes!nnThis re-design of Oneway's successful Flat Tool Jig System has 2 major improvements, including self-centering jaw grips, and an added engraved scale for angle repeatability.nnOther improvements, including a beefier arm, a wider U-bracket to allow sharpening wider tools, and a smoother roller system, all make this jig easier and more satisfying to use than ever... [read more]   [read 1 reviews and see ratings]

South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck
Made in the true South Bend fashion, these key type drill chucks are produced to close tolerances and are as beautiful as they are functional... [read more]   [read 15 reviews and see ratings]

South Bend Lathe SB1382 1/2-Inch by R-8 Keyless Chuck with Integral Shank
These keyless chucks are produced to the highest standards which has earned them the South Bend name... [read more]   [read 2 reviews and see ratings]

South Bend Lathe SB1376 5/8-Inch by JT6 Keyless Chuck
These keyless chucks are produced to the highest standards which has earned them the South Bend name... [read more]   [read 1 reviews and see ratings]

South Bend Lathe SB1375 1/2-Inch by JT33 Keyless Chuck
These keyless chucks are produced to the highest standards which has earned them the South Bend name... [read more]   [read 8 reviews and see ratings]

South Bend Lathe SB1378 1/2-Inch by MT No.2 Keyless Chuck with Integral Shank
These keyless chucks are produced to the highest standards which has earned them the South Bend name... [read more]   [read 2 reviews and see ratings]

South Bend Lathe SB1383 5/8-Inch by R-8 Keyless Chuck with Integral Shank
These keyless chucks are produced to the highest standards which has earned them the South Bend name... [read more]   [read 2 reviews and see ratings]

16mm 5/8" Pilot Size 11 Teeth Design Drill Chuck Key Tool
A chuck require a key to provide the necessary torque to tighten and loosen the jaws.Our chuck key which is ideal to tighten and loosen a chuck.... [read more]   [read 5 reviews and see ratings]

Amico 1/2" Thread Hex Nut SDS Plus Shank Electric Drill Chuck Adapter
SDS-plus shank, hex nut, male thread.Greatly replace the broken adapter with your drill chuck.... [read more]   [read 1 reviews and see ratings]

Hold Fast Spindle Adapter 1" x 8 Female to 1-1/4" x 8 Male
For making transitions between lathe spindles of different sizes... [read more]   [read 1 reviews and see ratings]

Hold Fast 3-1/2" Spindle Extender 1-1/4x8
Attaches to the lathe chuck spindle to add an extra 3-1/2" of each when doing deeper bowls or vessels when using Hold Fast's Vacuum Chucking System... [read more]   [read 1 reviews and see ratings]

Hold Fast 8" Vacuum Head 1-1/4" x 8 Spindle
8" head assembly for the Hold Fast Vacuum Chuck System... [read more]   [read 1 reviews and see ratings]

Hollow Fast Round Shank Shear Holder Kit
Clamps The Hollow Fast System's 1/4" round shank indexable shear cutter holders in position on the end of the boring bar... [read more]   [read 1 reviews and see ratings]

Hollow Fast System: Tail Stock
Using a premium laser as the guide and your choice of carbide insert tooling or high speed steel as the cutters, the articulated arm Hollow Fast System will have you hollowing and smoothing vessels with a combination of precision and ease you never thought possible.nnWith it's stout 3/4" x 13" boring bar and almost infinitely positionable articulating arm you'll have the stability and control to create an amazing array of hollow forms... [read more]   [read 3 reviews and see ratings]

Sharp Fast Multi Jig Platform and Tool Rest and Jig Set
It you own a Sharp Fast Sharpening System for your bench grinder, and now are looking for something to do flat or square end curved woodworking tools, this platform system will help you get the job done.nnFrom skews, to gouges, to scrapers, to plane irons, to chisels, this set will handle them all.nnJust like the original Sharp Fast, this system is adjustable for angle, height, and distance, so it can be postioned at the exact setting required.nnThe platform and jigs have a built-in tab & slot registration system for each type of tool to help you get precise and repeatable results every time... [read more]   [read 1 reviews and see ratings]

Nova 5" Titan Chuck 1-1/4" x 8tpi Direct Thread with 4" Powergrip Jaw Set
The Nova Titan Chuck is a large solid chuck designed for use on large lathes and for larger projects.nnThis solid 5" diameter chuck with it's larger jaw capacity is capable of handling much larger projects than the SuperNova2 Chuck... [read more]   [read 9 reviews and see ratings]

11mm Pilot Key Loosen Tighten Tool Black Drill Chuck
<ul> <li>A chuck require a key to provide the necessary torque to tighten and loosen the jaws... [read more]   [read 1 reviews and see ratings]

Superior Electric ALC5491 mini lathe chuck 2 Inch die with MT-1 and MT-2 shank
Superior Electric ALC5491 mini lathe chuck 2 Inch die with MT-1 and MT-2 shank.... [read more]   [read 1 reviews and see ratings]

Amico 1-13mm Capacity B16 Mount Electric Key Type Drill Chuck
For milling machine, lathe, drilling machine, wood working machine... [read more]   [read 1 reviews and see ratings]

Dewalt/Black & Decker DW515/DW946 OEM Chuck Key # 330034-07
Compatible with the following models: DW946 Type 1 12V Cordless Hammer Drill , DW515 Type 1 1/2inch 2 Speed Hammer Drill , DW515 Type 2 1/2inch 2 Speed Hammer Drill , DW515 Type 3 Hammer Drill , DW503-35 Type 1 3/8" 4.2 Amp Hammer Drill , DW503-44 Type 1 3/8" 4.2 Amp Variable Speed Hammer Drill , 7197 Type 1 D3500 3/8 Variable Speed Reversible Drill , BD1500 Type 7 1/2 Drill , BD1600 Type 100 1/2 Drill , 26726 Type 1 1/2 Hammerdrill , 5075 Type 100 1/2 Hammer Drill , 27205 Type 2 1/2 Hammer Drill , 27205 Type 1 1/2 Hammer Drill , 22738 Type 1 1/2-Inch Hammer Drill... [read more]   [read 1 reviews and see ratings]

Hurricane HTC100 4" Woodturning 4 Jaw Chuck Kit, w/ Dovetail Jaws. For Wood Lathes with 1 " x 8 TPI Spindles
Hurricane Turning Tools has done it again... [read more]   [read 3 reviews and see ratings]

Pin Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck
This listing is for a set of Pin jaws with Dovetail , which are used on the Hurricane HTC100 4 Jaw Woodturning Scroll Chuck... [read more]   [read 1 reviews and see ratings]

Jumbo / Cole Jaws for Hurricane HTC125 Woodturning 4 Jaw Wood Lathe Chuck
This listing is for a set of Jumbo / Cole Jaws, which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck... [read more]   [read 1 reviews and see ratings]

Hurricane HTC125 5" Woodturning 4 Jaw Chuck Kit, w/ Dovetail Jaws. For Wood Lathes with M33 x 3.5 Spindles
Hurricane Turning Tools has done it again... [read more]

Hurricane HTC100/125 Woodturning Chuck Threaded Insert Adapter - 1 1/4" x 8 TPI
This is a threaded insert / adapter for Hurricane Turning Tools 4 jaw woodturning scroll chucks... [read more]   [read 1 reviews and see ratings]

Large Dovetail Jaws for Hurricane HTC125 Woodturning 4 Jaw Wood Lathe Chuck
This listing is for a set of Large Dovetail jaws, which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck... [read more]   [read 1 reviews and see ratings]

Hurricane HTC125 5" Woodturning 4 Jaw Chuck Kit, w/ Dovetail Jaws. For Wood Lathes with 1 1/4" x 8 TPI Spindles
Hurricane Turning Tools has done it again... [read more]   [read 6 reviews and see ratings]

Jumbo / Cole Jaws for Hurricane HTC100 Woodturning 4 Jaw Wood Lathe Chuck
This listing is for a set of Jumbo / Cole Jaws, which are used on the Hurricane HTC100 4 Jaw Woodturning Scroll Chuck... [read more]   [read 1 reviews and see ratings]

Pin Jaws for Hurricane HTC125 Woodturning 4 Jaw Wood Lathe Chuck
This listing is for a set of Pin jaws with Dovetail , which are used on the Hurricane HTC125 4 Jaw Woodturning Scroll Chuck... [read more]   [read 1 reviews and see ratings]

Hurricane HTC125 5" Woodturning 4 Jaw Chuck Kit, w/ Dovetail Jaws. For Wood Lathes with 1 " x 8 TPI Spindles
Hurricane Turning Tools has done it again... [read more]

Craftsman Wood Lathe MT2 Work Arbor 29850
Craftsman Wood Lathe MT2 Work Arbor 29850nFor use with Craftsman Morse Taper No.2 (MT#2) wood lathenFits morse taper no#2 headstock spindlesnHeat treated steelnSecures buffing wheels, wire brush and drum sanders to headstock... [read more]   [read 1 reviews and see ratings]

Easy Wood Tools T25647 1-1/4" 8 Easy Chuck
easy chuck to make turning much easier... [read more]   [read 3 reviews and see ratings]

Machine 6mm Dia Thread Chrome Plated Revolving Handle 5 Pcs
Revolving Handles have an internal bearing that allows the handle to remain fixed in your hand, for firm gripping while turning a Hand Wheel or crank.Can be used for Milling Machine, Lathe, Grinding Machine and so on.Please pay attention to themeasurementto make sure it&#39;s right for you before ordering.... [read more]   [read 2 reviews and see ratings]

Jacobs 33 Drill Chuck 1/2" Capacity with MT2 Morse Taper 2 Arbor & K32 Key
Jacobs 33BA drill chuck with K32 key, mounted on an MT2 / Morse Taper #2 arbor.nnKeyed Drill Chuck, Medium Duty, Bearing Type Plain Bearing, Mounting Type 5/8-16, Key Number K32, Closed Length 3.09 In, Open Length 2.43 In, Chuck Diameter 1.79 In, Capacity Max... [read more]   [read 2 reviews and see ratings]

Jacobs 33 Drill Chuck 1/2" Capacity with MT3 Morse Taper 3 Arbor & K32 Key
Jacobs 33BA drill chuck with K32 key, mounted on an MT3 / Morse Taper #3 arbor.nnKeyed Drill Chuck, Medium Duty, Bearing Type Plain Bearing, Mounting Type 5/8-16, Key Number K32, Closed Length 3.09 In, Open Length 2.43 In, Chuck Diameter 1.79 In, Capacity Max... [read more]   [read 3 reviews and see ratings]

Jacobs 33 Drill Chuck 1/2" Capacity with MT1 Morse Taper 1 Arbor & K32 Key
Jacobs 33BA drill chuck with K32 key, mounted on an MT1 / Morse Taper #1 arbor.nnKeyed Drill Chuck, Medium Duty, Bearing Type Plain Bearing, Mounting Type 5/8-16, Key Number K32, Closed Length 3.09 In, Open Length 2.43 In, Chuck Diameter 1.79 In, Capacity Max... [read more]   [read 1 reviews and see ratings]

Easy Wood Tools T25650 1-3/8" Easy Dovetail Jaws
When you're ready to grip a different part of your project, you will need to change to a different size or shape jaw set in order to work safely and have the most fun... [read more]   [read 1 reviews and see ratings]

Thumb Chuck Key for uxcell
  [read 3 reviews and see ratings]

NOVA G3 WOODLATHE CHUCK WITH 2" JAWS, WOODWORM SCREW, & SHOPSMITH INSERT
The latest addition to the Nova Chuck line... [read more]   [read 2 reviews and see ratings]

Drill America DEWA0233 Qualtech Drill Chuck Arbor, #2 Morse Taper Shank To #3 Jacobs Taper (Pack of 1)
Drill America Qualtech drill chuck arbor... [read more]   [read 1 reviews and see ratings]

NOVA 48232 G3 Reversible Wood Turning Chuck (fits 1" x 8tpi spindles) with Nova Spur Center
Ideally suited for turnings up to 12" or so in diameter, this chuck will thread directly onto lathes with a 1" x 8tpi spindle... [read more]   [read 2 reviews and see ratings]

TEKNATOOL SUPERNOVA 2 CHUCK W/2" JAWS & WOODWORM SCREW (SUPERNOVA2) W/1" X 8TPI INSERT
Probably the most popular woodturning chuck in existence - the Supernova 2 combines affordability with durability and reliability... [read more]   [read 1 reviews and see ratings]

TEKNATOOL SUPERNOVA 2 CHUCK W/2" JAWS & WOODWORM SCREW (SUPERNOVA2) W/1-1/4" X 8TPI INSERT
Probably the most popular woodturning chuck in existence - the Supernova 2 combines affordability with durability and reliability... [read more]   [read 2 reviews and see ratings]