Drill Bits - Countersink Drill Bits

Category Countersink Drill Bits has 203 product(s):

Vix-Bit 5VIXBIT Self Centering Pre-Drill Bit for 7/64-Inch Hinges and #5 and 6 Screws
This pre-drill bit saves hours of time by accurately drilling holes for hinges, door butts, window pulls, window latches, door latch bolts, striker plates, and all other hardware using screws... [read more]   [read 4 reviews and see ratings]

Makita 784832-A Quad-Driver Pre-Drill, Drive and Countersink Set, 13-Piece
Includes Quad-Driver shaft with built-in hex key, No... [read more]   [read 21 reviews and see ratings]

DEWALT DW2568 #8 Countersink with 11/64-Inch Drill Bit
The DeWalt countersink with tapered drill bit is ideal for fine-wood drilling and provides you with superior speed while leaving an ideal finish... [read more]   [read 11 reviews and see ratings]

DEWALT DW2539 #10 Countersink 3/16-Inch Replacement Drill Bit Only
DeWalt DW2539 #10 Countersink 3/16-Inch Replacement Drill Bit Only... [read more]   [read 5 reviews and see ratings]

DEWALT DW2538 #8 Countersink 11/64-Inch Replacement Drill Bit Only
DeWalt DW2538 #8 Countersink 11/64-Inch Replacement Drill Bit Only... [read more]   [read 12 reviews and see ratings]

DEWALT DW2569 Style#10 Countersink with 3/16-Inch Drill Bit
The DeWalt countersink with tapered drill bit is ideal for fine-wood drilling and provides you with superior speed while leaving an ideal finish... [read more]   [read 16 reviews and see ratings]

DEWALT DW2537 #6 Countersink 9/64-Inch Replacement Drill Bit Only
DeWalt DW2537 #6 Countersink 9/64-Inch Replacement Drill Bit Only... [read more]   [read 13 reviews and see ratings]

DEWALT DW2570 #12 Countersink with 7/32-Inch Drill Bit
The DeWalt countersink with tapered drill bit is ideal for fine-wood drilling and provides you with superior speed while leaving an ideal finish... [read more]   [read 7 reviews and see ratings]

DEWALT DW2535 3 Piece #6, #8, and #10 Countersink Assortment
DEWALT DW2535 3 Piece #6, #8, and #9 Countersink Assortment... [read more]   [read 62 reviews and see ratings]

DEWALT DW2540 #12 Countersink 7/32-Inch Replacement Drill Bit Only
DeWalt DW2540 #12 Countersink 7/32-Inch Replacement Drill Bit Only... [read more]   [read 1 reviews and see ratings]

DEWALT DW2567 #6 Countersink with 9/64-Inch Drill Bit
Quick, professional results are easy to achieve with the DeWalt DW2567 #6 countersink featuring a 9/64-inch tapered drill bit... [read more]   [read 18 reviews and see ratings]

DEWALT DW2050 Quick Change 3-Inch Magnetic Bit Tip Holder
DeWalt DW2050 Quick Change 3-Inch Magnetic Bit Tip Holder... [read more]   [read 6 reviews and see ratings]

DEWALT DW2043 Hex Shank Non Magnetic Adjustable Screw Depth Setter
DEWALT DW2043 Hex Shank Non Magnetic Adjustable Screw Depth Setter... [read more]   [read 8 reviews and see ratings]

DEWALT DW2115 #2 Phillips 2-Inch Power Bit (5-Pack)
DEWALT DW2115 #2 Phillips 2-Inch Power Bit, 5 Pack... [read more]   [read 4 reviews and see ratings]

DEWALT DW2223 3/8-Inch by 2-9/16-Inch Magnetic Socket Driver
DEWALT DW2223 3/8-Inch by 2-9/16-Inch Magnetic Socket Driver... [read more]   [read 1 reviews and see ratings]

DEWALT DW2095 Magnetic Drive Guide Set
Eliminate wobbling and slipping, while at the same time protecting your fingers, with the DEWALT DW2095 Seven-piece Magnetic Drive Guide Set... [read more]   [read 37 reviews and see ratings]

DEWALT DW2053CS 16-piece Drive Guide Set clipstrip
DEWALT DW2053 15 Piece Screwdriver Bit Tip Assortment with Magnetic Bit Tip Holder... [read more]   [read 6 reviews and see ratings]

Freud 7625L 2.5-Millimeter by 55-Millimeter Left Turn 2.5-Millimeter Shank Solid Carbide Drill Bit
The Freud Solid Carbide Drill Bits are ideal for drilling small diameter holes with multiple spindle machines... [read more]   [read 1 reviews and see ratings]

Freud 7625R 2.5-Millimeter by 55-Millimeter Right Turn 2.5-Millimeter Shank Solid Carbide Drill Bit
The Freud Solid Carbide Drill Bits are ideal for drilling small diameter holes with multiple spindle machines... [read more]   [read 1 reviews and see ratings]

General Tools & Instruments 34ST Pilot Bit Set
This set of 4 adjustable pilot bits is designed to drill precise countersink and counterbore screw holes for fine carpentry and woodworking... [read more]   [read 3 reviews and see ratings]

General Tools & Instruments 195-1/2 1/2-Inch Countersink Bit
This high speed countersink has a 5 flute rose pattern for chatter free countersinking on steel, brass, aluminum, plastic, wood, and other materials... [read more]   [read 36 reviews and see ratings]

General Tools & Instruments 372A 1/2-Inch Diameter Button Type Alnico Magnets
Alnico magnets are strong and permanent... [read more]   [read 1 reviews and see ratings]

Irwin 12411 1/2" High Speed Steel Countersink
High Speed Steel Countersinks, 1/2-inch diameter, milled and precision ground to countersink into any machinable material including iron, steel, soft metals, plastics or wood... [read more]   [read 5 reviews and see ratings]

Makita 784859-A Quad-Driver 11 Piece Pre-Drill, Drive and Countersink Set
The industrial quad-driver modular set from Makita is used to secure drill bits, countersinks and screwdriver bits... [read more]   [read 9 reviews and see ratings]

SKIL 90100 100 Piece Drilling and Driving Set in Plastic Case
This popular drill and drive bit set features a myriad of razor-sharp bits and resilient attachments to cover you for just about any household project you can dream up... [read more]   [read 3 reviews and see ratings]

Steelex D1041 Tapered Countersink Bit Set, 22-Piece
These tapered drill bits match standard screw sizes and taper to maximize the screw's holding power... [read more]   [read 14 reviews and see ratings]

Insty Bit G2575 Pilot Countersinks - Set of 5
Screw holes may be drilled flush or counterbored using these quality hex-shanked countersinks... [read more]   [read 2 reviews and see ratings]

Insty Bit G2572 7/64" (8 - 9 Screw) Pilot Countersink
Screw holes may be drilled flush or counterbored using these quality hex-shanked countersinks... [read more]   [read 3 reviews and see ratings]

Grizzly H3024 3-Piece 6 Flute Countersink Set, 82andNo.186;
This centerless countersink set features 6 flute, 82deg cutting edges and are made of high speed steel... [read more]

Grizzly G5729 90andNo.186; 5-Piece Countersink Set
Countersink and debur the easy way... [read more]   [read 1 reviews and see ratings]

DEWALT DW2711 No.8 Replacement Drill Bit and Countersink
DEWALT DW2711 No.8 Replacement Drill Bit and Countersink; designed for drilling and countersinking holes in wood... [read more]   [read 4 reviews and see ratings]

DEWALT DW2710 No.6 Replacement Drill Bit and Countersink
DEWALT DW2710 No.6 Replacement Drill Bit and Countersink; designed for drilling and countersinking holes in wood... [read more]   [read 2 reviews and see ratings]

DEWALT DW2712 No.10 Replacement Drill Bit and Countersink
The DEWALT DW2712 No.10 Replacement Drill Bit and Countersink is designed for use with a drill/drive system... [read more]   [read 2 reviews and see ratings]

Bosch CC2460 Clic-Change 7-Piece Phillips Bit and Countersinking Set
The Bosch line of step drills offers 13 different hole sizes with a single bit... [read more]   [read 22 reviews and see ratings]

Hitachi Power Tools 728091 Quick Change 10 Piece Drilling and Driving Set with Countersinks
Allows you to predrill, countersink or counter bore a screw hole, then drive a screw without rechucking by using the quick connect feature... [read more]   [read 6 reviews and see ratings]

Bosch CST3 3/4" Titanium Countersink
Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world... [read more]   [read 7 reviews and see ratings]

Bosch CST2 5/8-Inch Titanium Countersink
Bosch countersinks are great for deburring and chamfering openings to pre-drilled holes.... [read more]   [read 2 reviews and see ratings]

Tekz 16204 204-Piece Master Drill & Bit Set in Quad-Fold Case
204 pc Master drill and Bit Set... [read more]   [read 31 reviews and see ratings]

Titan 16048 Quick-Disconnect 48 Piece Drilling and Driving Set in Plastic Case
48 piece Quick-Disconnect Bit set includes 13 high speed steel drill bits 7 power nut drivers 12 assorted 2" power screwdriver bits 9 assorted 1" power screwdriver bits countersink quick Disconnect coupler magnetic bit extension 1/4" hex adaptor 2 portable bit cases and blow molded master case.... [read more]   [read 16 reviews and see ratings]

22pc Countersink Drill Bit Sets W/case
Made for screw sizes: #5, #6, #7, #8, #9, #10, and #12 This new set also comes with a custom flip top wooden case The set comes with 7 countersink bits, hex bits, and storage box (I think it is called 22pc because the bits come apart into 3 pcs and the case counts as a piece)... [read more]   [read 47 reviews and see ratings]

Stanley ST-02151 150-Piece Drill and Drive Bit Set in Plastic Case
The Stanley ST-02151 150-Piece Drill & Drive Bit Set includes 46 assorted 1-inch insert bits, 14 2-inch power bits, 7 3-1/2-inch power bits, 10 nutsetters, 2 drywall screw setters, 3 hex-square adapters, 21 titanium hex shank drill bits, 4 masonry drill bits, 5 wood boring bits, 4 hex shank brad point drill bits, 4 drill stops, 3 plug cutters, 2 glass/tile bits, #6, #8, and #10 countersinks, 6 replacement countersink drill bits, and a 1/4-inch hex shank connector that fits all 3/8-inch and 1/2-inch drills... [read more]   [read 7 reviews and see ratings]

Vermont American 16515 no.6 to no.10 Hex Shank Predrill and Countersink Assortment, 4-Piece
Use screw pilots for drilling clean pilot holes in wood, plastic and composite materials... [read more]   [read 16 reviews and see ratings]

Empire Level 27771 High Speed Steel Countersink, 1/2-Inch Capacity, 5 Flute
This high speed countersink has a 1/2-Inch capacity, five flute pattern for chatter free countersinking on wood, plastic and soft metal... [read more]   [read 1 reviews and see ratings]

7/64" Vix Bit For #5 and #6 Screws
This highly accurate, self-centering hinge drilling 7/64" Vix bit is used for precise drilling of holes for cabinet and door hinges, door butts and all large and small hardware... [read more]   [read 3 reviews and see ratings]

Vermont American 16595 3 Piece 3/8-Inch, 1/2-Inch, and 5/8-Inch 1/4-Inch Shank Plug Cutter Assortment
Use plug cutters to produce accurate plugs in any type of wood... [read more]   [read 1 reviews and see ratings]

Tapered Drill Bit, 11/64", Fits #8 Screw
The combination of a quality high-speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws... [read more]   [read 1 reviews and see ratings]

Vermont American 16642 3/8-Inch Steel Countersink
We design the toughest, longest lasting, highest quality drill bits in the industry... [read more]   [read 1 reviews and see ratings]

Bosch CC2244 Clic-Change Number 6 Adjustable Countersink
This quick change bit system features true one-handed load and release and is up to 33% faster than competitive systems... [read more]   [read 1 reviews and see ratings]

SKIL 90119 119 Piece Drilling and Driving Set in Plastic Case
Skil 119pc Home Project Kit - 119 drilling and screwdriving bits in a durable plastic case... [read more]   [read 10 reviews and see ratings]

Eazypower Corp 30072 Tool Steel Countersinks
Countersink, deburr, and chamfer holes in soft metal and wood... [read more]   [read 1 reviews and see ratings]

Eazypower 30047 1-each Countersink Drill, 4-Piece
4-Piece Set Countersink & Adjustable Drills Drill Bits for a better fit for wood screws made from high quality tool steel for a better fitting wood screws and maximum structural integrity of materials and fasteners.... [read more]   [read 1 reviews and see ratings]

Bosch CSH1 1/2-Inch HSS Countersink
Bosch countersinks are great for deburring and chamfering openings to pre-drilled holes.... [read more]   [read 1 reviews and see ratings]

Bosch CSH3 3/4-Inch HSS Countersink
Bosch countersinks are great for deburring and chamfering openings to pre-drilled holes.... [read more]   [read 1 reviews and see ratings]

Vermont American 16620 4 Piece Drywall Bit Tip Set with Bit Tip Holder
Automatically countersink screws to the proper depth in drywall... [read more]   [read 1 reviews and see ratings]

Bosch CST1 1/2-Inch Titanium Countersink
The Bosch line of countersinks are great for deburring and chamfering openings to pre-drilled holes... [read more]   [read 18 reviews and see ratings]

Greenlee DTAP12-24 Combination Drill and Tap Bit, 12-24NC
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]

Greenlee DTAP10-32 Combination Drill and Tap Bit, 10-32NF
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 8 reviews and see ratings]

Greenlee DTAP10-24 Combination Drill and Tap Bit, 10-24NC
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 5 reviews and see ratings]

Greenlee DTAP8-32 Combination Drill and Tap Bit, 8-32NC
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 10 reviews and see ratings]

Wolfcraft 2593 #10 Screw Setter
- No... [read more]   [read 1 reviews and see ratings]

Sink Tailpiece (ace161cp)
PLUMB PAK SINK TAILPIECE *1-1/4 X 6 *Flanged *Brass *Chrome plate finish *Bulk... [read more]   [read 1 reviews and see ratings]

Grip 22 pc Counter Sink Drill Bit Set
Grip 35230 22-Piece Counter Sink Drill Bit Set... [read more]   [read 1 reviews and see ratings]

Long Carbide Rotary Deburring Set - 4-Pc. Set
For deburring steel, cast iron and other ferrous material... [read more]   [read 1 reviews and see ratings]

Alltrade 580016 Spin and Drive 9 Piece Pre-Drill and Drive Assortment with Countersink
Tired of contantly switching from drill bit to driver on your power drill or spending too much money on multiple power drills to make your job go faster? With the new Spin and Drive from Alltrade you will save time on money on every project with ease... [read more]   [read 4 reviews and see ratings]

Spring Tools 32R34-1 Two Bit Snapper
Spring Tools 32R34-1 Two Bit Snapper Combination Nail Sets - These Tools Are Ideal For Setting and Countersinking Different Sized Nails and Brads... [read more]   [read 3 reviews and see ratings]

Amana 55204 CT COUNTERSINK, #6 SCREW
Carbide-Tipped Countersinks for Wood Screws... [read more]   [read 2 reviews and see ratings]

Amana 55203 CT COUNTERSINK, #4 SCREW
Carbide-Tipped Countersinks for Wood Screws... [read more]   [read 1 reviews and see ratings]

QUICK CHANGE Multi Function Industrial Tool DRILL BIT / COUNTERSINK / DRIVER
The perfect companion to your drill... [read more]   [read 1 reviews and see ratings]

Robert Larson 10 Inch Swing Bit Brace with 3 Jaw Chuck
This is an extremely high quality brace with a 3 jaw chuck that will securely grip round shank drills and hex shank tools... [read more]   [read 9 reviews and see ratings]

Stern Hand Countersink with Wood Handle
Useful for when a standard cordless drill won't fit in the work area, or for small or delicate countersinking jobs, the Stern Hand Countersink is easy to control and comes with seven high-quality flutes for exceptionally smooth and versatile countersink boring... [read more]   [read 3 reviews and see ratings]

CRLWeldonCountersinkSet
Produce a Smooth, Round Countersunk Hole Every Time... [read more]   [read 5 reviews and see ratings]

Eazypower 30354 5/8-Inch Countersink 1/4-Inch Hex, 1-Pack
5/8-Inch countersink with Hex Shank made from high quality tool steel for a better fitting wood screws ensuring a tight fit and maximum structural integrity of materials and fasteners.... [read more]   [read 7 reviews and see ratings]

Hitachi 728105 1/4-Inch Hex Shank, 1/8-Inch Drill, 3/8-Inch Countersink and #10 Bit Phillips Drive Set
The Hitachi 728105 is a 1/4-inch hex quick-change drill and drive bit... [read more]   [read 3 reviews and see ratings]

TEKTON 7289 Countersink Drill Bit Set, 22-Piece
Hardened and Tempered M2 High Speed Steel , Single Twist Drill Bit Creates Tapered Hole and Countersink in One Action, Separately Adjustable and Removable 4-Flute Countersink and Stop Collar... [read more]   [read 2 reviews and see ratings]

Amana 55269 QUICK COUNTERSINK 3/8" DIAM
Carbide-Tipped Countersinks w/ Hex Shank... [read more]   [read 1 reviews and see ratings]

Amana PS-500 5 PCE PLUG SET W/DRILLS & PLUG
Carbide-Tipped Countersink & Steel Plug Cutter Set... [read more]   [read 2 reviews and see ratings]

Timberline 608-116 Quick Release Countersink for No.10 Wood Screw Size by 1/8-Inch Diameter by 3/8-Inch Carbide Tipped Hex Shank
If you're looking for Countersinks that offer superior cuts and smooth performance at prices that can't be beat - then look no further... [read more]   [read 2 reviews and see ratings]

Timberline 608-114 Quick Release Countersink for No.8 Wood Screw Size by 7/64-Inch Diameter by 3/8-Inch Carbide Tipped Hex Shank
If you're looking for Countersinks that offer superior cuts and smooth performance at prices that can't be beat - then look no further... [read more]   [read 10 reviews and see ratings]

3-in-1 Titanium Plated Counter Sink Bit Set
3pc Titanium Cpated Counter Sink Bits w/ Driver Handle... [read more]   [read 8 reviews and see ratings]

Kawasaki 840162 Drill and Drive Set 41 Pieces
Kawasaki power tools and equipment deliver quality, value and satisfaction to do-it-yourself consumers... [read more]   [read 3 reviews and see ratings]

Insty Bit Quick Change Drilling Systems 1 Fluted Countersink 100º
  [read 1 reviews and see ratings]

Montana Brand MB-63126 28pc Drill & Drive Set (Made in USA)
This indeed may be the perfect set... [read more]   [read 4 reviews and see ratings]

QUICK CHANGE COUNTERSINK DRILL BIT SIZE 1/8" BY SNAPPY
Combination countersink and/or counter bore for standard wood plugs... [read more]   [read 1 reviews and see ratings]

Snappy 48240 82 Degree Countersink
Highlights: Countershink or chamfer pre-drilled holes 82countersink angle Use on metal or wood... [read more]   [read 2 reviews and see ratings]

10 Pc Modular Drill & Drive Set
The 10 piece Modular Drill & Drive Set features the Quick Flip and Drive system... [read more]   [read 7 reviews and see ratings]

Flushmount Drill Bit (9/16)
Micro Flushmount Drillbit System With Carbide Bit... [read more]   [read 5 reviews and see ratings]

Wera 846/8 Kraftform Countersink Bit and Bit Set, 8-Piece
Wera 8 Piece Countersind Bit set includes Kraftform bit holding screwdriver, Rapidaptor Universal bit holder and 1/4” hex drive countersink bits designed Bit-Safe with magnetic quick-release bit holder is designed as the comprehensive bit and holder sets for manual or power use... [read more]   [read 2 reviews and see ratings]

QUICK CHANGE 5 PC. COUNTERSINK DRILL BIT SET BY SNAPPY
Quick Change 5 Piece Countersink Drill Bit Set by Snappy... [read more]   [read 10 reviews and see ratings]

QUICK CHANGE CHUCK AND 3 PC COUNTERSINK DRILL BIT SET BY SNAPPY
Allows you to quickly & easily change drill bits & accessories with no hassle or chuck key... [read more]   [read 1 reviews and see ratings]

Dewalt - 12 Pilot Bit & 4 Cutter Countersink
DeWalt 12 Pilot Bit & 4 Cutter Countersink DEWDT7607QZ The DeWalt four cutter countersink provides a clean, professional finish... [read more]   [read 1 reviews and see ratings]

MLCS 9192 High Speed Steel Tapered Drill Bit Countersink Set
A tapered hole grips a screw along its entire length, giving exceptional thread "bite" and less chance of a stripped hole from today's power screw drivers... [read more]   [read 2 reviews and see ratings]

Fowler 52-483-888 Universal Deburring, Cleaning & Countersink Set, 1 Universal Handle
Universal Deburring, Cleaning & Countersink Set A complete kit for Machine Shop Applications... [read more]   [read 1 reviews and see ratings]

Mibro 589201 5-Piece Titanium Coated Countersinks
This 5-Piece Titanium coated countersink set from Mibro - a 60 plus year old company selected as one of Canada's "50 Best Managed Companies" contains sizes 1/4-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch, and 3/4-Inch... [read more]   [read 23 reviews and see ratings]

Universal Deburring, Cleaning and Countersink Set (FOW72-483-888) Category: Cutters and Scribers
Item #: FOW72-483-888.Features & Benefits1 Universal Handle, 2 Adapters2 Deburring Blades1 Countersink for 20mm/.47" diameter1 Countersink for 30mm/1.18" diameter4 Cleaner Blades, for sheet metal, small ridges, releaving corners and for narrow slotsUniversal Deburring, Cleaning and Countersink Set... [read more]   [read 1 reviews and see ratings]

Irwin 90583 1/4'' Hex Shank Screw Pilot
Drills, countersinks, and counterbores in 1 operation... [read more]   [read 1 reviews and see ratings]

Uncle Mike's Front / Rear Step Drill Set for Swivel Mounting
Uncle Mike's Step Drill for Swivel Mounting features a special blade that cuts cleanly without drawing down or splintering wood... [read more]   [read 11 reviews and see ratings]

Festool 492523 Centrotec Countersink Drill Bit, 3.5mm
3.5mm Adustable countersink drill bit with a free spinning depth stop for use with the Centrotec system... [read more]   [read 2 reviews and see ratings]

#11 quick change set to countersink, counterbore and predrill and plug for screw sizes 6, 8, 10, 12 and 14
No... [read more]   [read 5 reviews and see ratings]

Promax WB70031 10-Piece Combination Taper Drill and Countersink Set in Wooden Box
Our Promax 10-Piece combination taper drill set in a wooden storage box, includes your most popular taper drill sizes and countersinks, along with plug cutters to complete your job with a great finish.... [read more]   [read 3 reviews and see ratings]

Greenlee DTAP6-32 Combination Drill and Tap Bit, 6-32NC
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 8 reviews and see ratings]

Big Horn 13200 Taper Drill & Countersink Set, 7 Pieces
Use our 7 piece tapered countersink bit set to quickly drill a starter hole with a big enough entry to hide the head of a nail or screw in one easy step... [read more]   [read 1 reviews and see ratings]

W.L. Fuller 11900375 3/8" ID Stop Collar for Countersinks and Counterbores
Stop Collars - Designed to be used on most of W.L... [read more]   [read 1 reviews and see ratings]

W.L. Fuller C8M Number 8 Complete Countersink with Taper Drill
High quality - made in U.S.A... [read more]   [read 3 reviews and see ratings]

W.L. Fuller 11640250 1/4-Inch Plug Cutter
High quality, made in the U.S.A... [read more]   [read 4 reviews and see ratings]

W.L. Fuller C12M Number 12 Complete Countersink with Taper Drill
High quality - made in U.S.A... [read more]   [read 1 reviews and see ratings]

W.L. Fuller C9M Number 9 Complete Countersink with Taper Drill
High quality - made in U.S.A... [read more]   [read 1 reviews and see ratings]

3-in-1 Hand Countersink
A versatile tool that saves you a whole lot of time! No tool makes chamfers more quickly in wood... [read more]   [read 4 reviews and see ratings]

Rockler 18-Pc. Self-Centering & Countersink Set
18-piece Rockler/Insty-Drive self-centering and countersink set lets you convert from drilling and countersinking to installing perfectly centered hinge screws in a matter of seconds - without re-chucking any bits! The 18-Piece set includes #6, #8 and #10 HSS 2-flute tapered hex shank bits with 4-flute countersinks; #6, #8 and #10 hex shank HSS self-centering bits; Rockler's Insty-Driver; 10 of the most popular drive bits; and a nylon pouch with belt loop... [read more]   [read 8 reviews and see ratings]

#5 Pro Tapered Countersink Bit
The cleanest-cutting countersinks available! Two ultra-deep flutes clear chips with remarkable efficiency and leave a perfectly clean rim, even in delicate veneers... [read more]   [read 1 reviews and see ratings]

JACK RABBIT PILOT HOLE & DRIVE SET
The driver tip goes into the drill chuck, then a combination drill and countersink bit locks over it... [read more]   [read 4 reviews and see ratings]

Folder, Aluminum Handle, Rainbow Stainless Blade
improvement jobs... [read more]   [read 1 reviews and see ratings]

C.R. LAURENCE CS18 CRL 9/16" Weldon Countersink
C.R... [read more]   [read 1 reviews and see ratings]

Westward 1UBE7 Spin and Drive Set, 9 Pc
Spin and Drive Set, 9 Piece, Quick Change From Drill Bit To Driver Bit, For Use With Power Drill, Material Steel And Aluminum, Number of Pieces 9, Includes York And Fork Body, Phillips Style Screw Bits, No 1, No 2, No 3, Drill And CounterSink, No 6, No 8, No 10, No 12... [read more]   [read 1 reviews and see ratings]

Champion CSK-SET-5 Zero Flute 82-Degree Countersink Set, 5-Piece
Champion high speed steel zero flute countersinks offer superior quality, unique designs and outstanding performance, yielding excellent work piece finish.... [read more]   [read 10 reviews and see ratings]

Champion CSK-SET-4 Zero Flute 82-Degree Countersink Set, 4-Piece
Champion high speed steel zero flute countersinks offer superior quality, unique designs and outstanding performance, yielding excellent work piece finish.... [read more]   [read 1 reviews and see ratings]

Timberline 608-751 Titanium Coated M2 HSS Countersink 82 Deg x 5/16 Dia x 1/4 Inch Shank
82 Titanium Coated HSS Countersinks... [read more]   [read 2 reviews and see ratings]

Timberline 608-764 M2 HSS Countersink 82 Deg x 5/8 Dia x 1/4 Inch Shank
82 HSS Countersinks... [read more]   [read 1 reviews and see ratings]

SGS Tool Company 18211 Bur Set 6 D/C Carbide Bur 1/4 Shank Diameter
Includes burs: SA-5, SC-3, SC-5, SD-5, SF-3, SF-5, SG-3, SL-5 (all double cut burs).... [read more]   [read 2 reviews and see ratings]

SGS Tool Company 18201 Bur Set 1 D/C Carbide Bur 1/8 Diameter 1/8 Shank Diameter
includes burs: SA-42, SA-43, SC-41, SC-42, SD-42, SE-41, SF-42, SG-43, SH-41, SL-42, SM-42, SN-43 (all double cut burs).... [read more]   [read 2 reviews and see ratings]

Hitachi 728491 Titanium Quick Change Counter Sink Set, 5-Piece
The Hitachi 728491 Titanium Quick Change Counter Sink Set with DuraCore is equipped with hex shanks that fit all quick change drill/drive systems... [read more]   [read 4 reviews and see ratings]

#1 Style, #10 Screw Size WELDON 82° Countersink Tool
These countersinks and deburring tools designed to make 60degrees, 82degrees, 90degrees and 100degrees cuts with greater ease... [read more]   [read 1 reviews and see ratings]

#1 Style, #4-5 Screw Size WELDON 82 Degree Countersink Tool (1 Each)
These countersinks and deburring tools designed to make 60degrees, 82degrees, 90degrees and 100degrees cuts with greater ease... [read more]   [read 1 reviews and see ratings]

#2 Style, 5/16 Screw Size WELDON 82° Countersink Tool
These countersinks and deburring tools designed to make 60degrees, 82degrees, 90degrees and 100degrees cuts with greater ease... [read more]   [read 1 reviews and see ratings]

#1 Style, 3/16"-17/32" WELDON 82° Pilotless Countersink Tool
These countersinks and deburring tools designed to make 60degrees, 82degrees, 90degrees and 100degrees cuts with greater ease... [read more]   [read 1 reviews and see ratings]

#1 Style, #8 Screw Size WELDON 82° Countersink Tool
These countersinks and deburring tools designed to make 60degrees, 82degrees, 90degrees and 100degrees cuts with greater ease... [read more]   [read 2 reviews and see ratings]

1/2X1/4 SHANK X 82 DEGREE, SINGLE FLUTE, HIGH SPEED STEEL, COUNTERSINK
Single flute countersinks are ideal for chamferring, deburring and countersinking... [read more]   [read 1 reviews and see ratings]

DEWALT DD5008 1/8-Inch Impact Drill Bit
The DEWALT DD5008 1/8-Inch Impact Drill Bit is designed to be used in a 1/4" Hex Shank Impact Drivers to drill holes from 1/8" to 1/2" holes in metal, wood, or plastic... [read more]   [read 1 reviews and see ratings]

Big Horn 19555 3-in-1 Countersink
This Big Horn 3-in-1 countersink set has three interchangeable cutters, 1/2-inch, 5/8-inch, and 3/4-inch diameter to countersink common wood screws... [read more]   [read 12 reviews and see ratings]

W. L. Fuller 10393011C #11 5-Piece Taper Drill Set
W... [read more]   [read 7 reviews and see ratings]

Big Horn 19143 #12 Hex Shank Hinge Bit
This self centering, all steel construction hinge bit fits screw size #12 The spring loaded outer guide keeps drill centered for perfect pilot holes... [read more]   [read 1 reviews and see ratings]

Vermont American 16630 1/2-Inch Titanium Coated Countersink, 3-Pack
Use titanium coated countersinks for countersinking, deburring and chamfering in iron, steel, soft metal, plastic, wood and other machinable materials.... [read more]   [read 1 reviews and see ratings]

Drill Bit 1/4 Taper Poin T
Drill Bit 1/4 Taper Poin T.... [read more]   [read 1 reviews and see ratings]

W.L. Fuller 10390006C No. 6 Countersink / Taper Drill Bit Set for #5 to #9 Screws
Set of 5 Countersinks with 3/8 cutting diameter and matching Taper Point Drills, in a foam insert cardboard container... [read more]   [read 3 reviews and see ratings]

Craftsman 8-Piece Countersinking Phillips Bit Set with Quick Connector, # 25824
The angled head of the countersinking phillips bits included in this set have revolutionary cutting blade flutes to countersink holes perfectly, flush-mounted to the screw head... [read more]   [read 2 reviews and see ratings]

Kaufhof QS-Q-E Counter Sink Set with 3/8 Plug Cutter
  [read 2 reviews and see ratings]

Festool 492521 Centrotec Pilotless Countersink, D5-15mm
Centrotec Pilotless Countersink, D5-15mm... [read more]   [read 2 reviews and see ratings]

Black & Decker 114-piece Home Project Kit
  [read 7 reviews and see ratings]

Snappy Tapered Countersinking Drill Set
Snappy tapered bits allow you to get maximum grip from your wood screws... [read more]   [read 1 reviews and see ratings]

Fuller Tapered Drills Boxed Set
This set of Fuller Tapered Drills includes all the bits needed for proper installation of the most often used #6, #8, #10, #12, and #14 wood screws... [read more]   [read 1 reviews and see ratings]

RK1814K2 - Rockwell 18-volt Pro-Grade Combo Kit
Product DescriptionnTwo speed 1/2" drill, no slip keyless chuck, twist locking system and variable speed range, 24 torque settings with 485 in/lbs of torque, 5-1/2" circular saw with integrated vac port, all-aluminum upper and lower guards, reciprocating saw with no load speed of 0-2700 SPM and a stroke length 7/8", work light with 310 degree rotating head for increased versatility and 180 minutes of strong light on a single charge... [read more]   [read 1 reviews and see ratings]

Tapered Drill Bit, 1/8", Fits #5 Screw
The combination of a quality high-speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws... [read more]   [read 1 reviews and see ratings]

Countersink, 3/8", Fits #5 Screw Bit
The combination of a quality high-speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws... [read more]   [read 1 reviews and see ratings]

Countersink, 3/8", Fits #7 Screw Bit
The combination of a quality high-speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws... [read more]   [read 1 reviews and see ratings]

Tapered Drill Bit, 3/16", Fits #9 Screw
The combination of a quality high-speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws... [read more]   [read 1 reviews and see ratings]

Tapered Drill Bit Set, 16 Piece
The combination of a quality high-speed tapered drill with a countersink and stop collar, in conjunction with the correct plug cutter, is by far the best way to prepare fine work for wood screws... [read more]   [read 2 reviews and see ratings]

22-Piece Tapered Drill Set
Give wood screws more bite by pre-boring with these tapered drill bits... [read more]   [read 1 reviews and see ratings]

Snappy 5/64" Twist Replacement Bits (2)
In one step, you can drill, countersink, and counterbore the perfect sized hole for #4, #6, #8, #10, or #12 screws... [read more]   [read 2 reviews and see ratings]

25 PC TOOL POUCH PREM. DRILLING SYSTEM
This system is designed for rugged everyday use by both professionals and demanding hobbyists... [read more]   [read 1 reviews and see ratings]

Drill Bit #8 PRO PLUG TOOL FOR WOOD & USE WITH THE PRO PLUG SYSTEM [Misc.]
The Smart-Bit PRO PLUG System makes plugging IPE decks fast & easy... [read more]   [read 3 reviews and see ratings]

W L Fuller 10349003C Countersinks and Matching HSS Taper Point Drills, Set of 3
W L Fuller 10349003C Set of 3 Countersinks with Matching Quick Change HSS Taper Point Drills are proudly made in the USA and are the best tools on the market today to pre-drill the head shank and threads of screws... [read more]   [read 7 reviews and see ratings]

Adjustable Counterbores - CBD 3/4 | CDHD 5/16 | OL 2
These adjustable counterbores made from high quality carbon steel are used in combination with a brad-point or v-point drill bit... [read more]   [read 1 reviews and see ratings]

DEWALT DD5012B6 3/16-Inch Impact Drill Bit (6-Pack)
These Dewalt Power Tools are precision-engineered and are appreciated for delivering accurate and reliable performance... [read more]   [read 1 reviews and see ratings]

Greenlee DTAPM6C Combination Drill and Tap Bit, M6
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 1 reviews and see ratings]

Greenlee DTAPM5C Combination Drill and Tap Bit, M5
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 1 reviews and see ratings]

Greenlee DTAP3/8-16 Combination Drill and Tap Bit, 3/8-16NC
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 4 reviews and see ratings]

Greenlee DTAP5/16-18 Combination Drill and Tap Bit, 5/16-18NC
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 5 reviews and see ratings]

Greenlee DTAPM3C Combination Drill and Tap Bit, M3
Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time... [read more]   [read 3 reviews and see ratings]

Century Drill & Tool Co Inc 150pcset GTV 150 Piece Drill BIT SET
GTV, 150 Piece Drill Bit Set, Includes: Titanium (7) 3/64",6 Each 1/16",5/64",3/32",(4)1/8", (2) 9/64",1 Each 5/32",11/64",3/16",7/32", 1/4",9/32,5/16",11/32",3/8",7/16",15/32",1/2", (12) Brad Point 1/8",5/32",3/16",1/4"x3-5/8",1/4"x12",9/32",5/16",11/32",3/8"x4-1/2",3/8"x12",5/16",1/2",(19) Masonry 1/8",5/32",3/16"x3-1/2",3/16"x6",1/4"x4",1/4"x6",1/4"x12",9/32",5/16"x4-3/4",5/16"x6",5/16"x12",11/32",3/8"x4-3/4",3/8"x12", 9/32",7/16",15/32",1/2"x6",1/2"x12"; (5)Wood Spade 1/4",1/2",3/4",7/8",1", (4)Carbon Hole Saw 1-1/4",1-1/2",1-3/4",2-1/8", Hole Saw Arbor; 1/4" Drive Ratcheting Bit Holder, Mag Bit Holder; Power Bits (3) Slotted 5/32",3/16",1/4", (3) Philips #1,#2,#3, (2) Pozi #1,#2; Insert Screwdriver Bits (13) Slotted 1/8", 5/32", 3/16", 1/4", 9/32",(8) Philips #0, #1, #2, #3, (8) Pozi #0, #1, #2, #3, (8) Square #02, #1, #2, #3, (7) Star T10,T15,T20,T25,T27,T30,T40 (6) Hex 5/64",3/32",1/8",5/32",3/16"1/4";(3) Drill Stops 1/8",3/16",5/16";(1) 1/2" Countersink,6" Ruler, Screw Finder.... [read more]   [read 1 reviews and see ratings]

7-piece Taper Drill & Counter Sink Set
Our high speed hex shank set includes 7 tapered drill bits with 7 matching countersinks and 7 adjustable depth stop collars with allen wrench... [read more]   [read 1 reviews and see ratings]

#7 Trim Smart-Bit Pre-Drilling and Countersinking Tool for Decks and Woodworking (item # BDA140)
Decks have undergone an evolution in recent years, from being part of the backyard to part of a home's primary living space... [read more]   [read 1 reviews and see ratings]

Drill Bit #8 PRO PLUG REPLACEMENT BITS 5/BITS FOR USE W/THE PRO PLUG SYSTEM TOOL
The Smart-Bit PRO PLUG System makes plugging IPE decks fast & easy... [read more]   [read 1 reviews and see ratings]

S.E. Vick 9/64" Replacement Drill Bit for #9 Vix-Bit
VixBit 964DRILLBIT 9/64 Replacement Drillbit (For Vic Bit)... [read more]   [read 1 reviews and see ratings]

Insty Bit 82603 Quick Change Taper Drill Countersink Set
3-Piece Taper Drill Countersink Set includes taper bits and 4-flute countersinks for #6, #8 and #10 screws... [read more]   [read 2 reviews and see ratings]

Ivy Classic 1/2" Countersink M2 HSS, 5 Flute
Premium Swift Bore Countersinks are made of M2 High-Speed Steel, suitable for plastic, wood or metal.... [read more]   [read 1 reviews and see ratings]

3/8" (.3750) DIA. Carbide Countersink , Three Flute , 100 Degree
3/8" (.3750) DIA... [read more]   [read 1 reviews and see ratings]

5/8" (.6250) DIA. Carbide Countersink , Three Flute , 100 Degree
5/8" (.6250) DIA... [read more]   [read 1 reviews and see ratings]

Starborn Smart Bit Bda141 Trim Head Tool, #8
Decks have undergone an evolution in recent years, from being part of the backyard to part of a home's primary living space... [read more]   [read 1 reviews and see ratings]

Milescraft 5341 Counter Bit Set, 4-Piece
Simultaneously countersink or counterbore screw pilot holes.... [read more]   [read 79 reviews and see ratings]

Half-Time Drill
Drilling to Driving In half the time! Drill Flip Drive!... [read more]   [read 49 reviews and see ratings]

Insty-bit 82611 11/64" Hex Shank Taper Drill Bit & Countersink for #8 Screws
Tapered drill bit with adjustable smooth cutting 4-flute countersink allows for installing screws flush or recessed in a 3/8" counterbore.nnCan be used with Insty-Bit Quick Change Chuck # IB80138 (sold separately).nnReplacement tapered drill bit available, order # IB81611.... [read more]   [read 1 reviews and see ratings]

Fisch FSK-315599 Magnetic Handheld Countersink, Bit Holder, and Drill Bit Holder
The Fish Hand Countersink with Magnetic Quick Change Adapter is great for countersinking and deburring bores in wood, plastic, and metal... [read more]   [read 1 reviews and see ratings]

iGaging Premium Steel Countersink
This high speed steel countersink bit is precision ground and will produce accurate countersinks in wood, metal and other materials... [read more]   [read 1 reviews and see ratings]

Colt 10850964 No 6 ZeroMark Countersink Bit
The ZeroMark countersink drilling system allows complete and precise depth control when pre-drilling screw holes... [read more]   [read 1 reviews and see ratings]

Colt 10851164 No 8 ZeroMark Countersink Bit
The ZeroMark countersink drilling system allows complete and precise depth control when pre-drilling screw holes... [read more]   [read 1 reviews and see ratings]

Colt 10850732 No 12 ZeroMark Countersink Bit
The ZeroMark countersink drilling system allows complete and precise depth control when pre-drilling screw holes... [read more]   [read 2 reviews and see ratings]

Colt 10851364 No 10 ZeroMark Countersink Bit
The ZeroMark countersink drilling system allows complete and precise depth control when pre-drilling screw holes... [read more]

Woodtek 801432, Bits, Drill And Boring, Countersinks, 1/8" Tapered Pilot Bit Hex Shank
These hex shank pilot bits exactly match the wood screw size.Woodtek® hex shank tapered pilot bits provide efficient wood ejection and resist clogging:Pilot bits feature a single twist, fast pitch design for wood that ejects chips more efficiently and resists clogging.Tough enough for continuous duty in hardwoods.Sizes are for hardwoods... [read more]   [read 1 reviews and see ratings]

Aircraft Tool Supply Countersink Kit W/Pilot Cutter
Great package deal featuring our 133 Microstop Countersink plus 4 pilot cutters (1000-100 series) in sizes #40, #30, #21, and #12.... [read more]   [read 2 reviews and see ratings]

C.R. LAURENCE 10SCS CRL 25/64" Countersink
Produce a Smooth, Round Countersunk Hole Every Time Best Countersink Available for Aluminum Cut Degree is 82° CRL Countersinks were specifically designed to cut round countersunk holes in aluminum... [read more]   [read 1 reviews and see ratings]

Fisch FSE-095828 1/4-Inch Tapered Plug Cutter
Fish tapered plug cutters feature a special 4 flute design with a 0.8 degree taper that ensures tight plugs every time.... [read more]   [read 2 reviews and see ratings]

5pc Heavy Duty Industrial Grade NEIKO Countersink Drill BIT Tool SET Woodworking Professional Tools
NEW 5pc Industrial Countersink Bit Set- Wholesale WOODWORKING TOOLS - Makes a Great Tool Kit Comes in Handsome Aluminum Case for Ease of Storage... [read more]   [read 3 reviews and see ratings]

Promax WB70231 Taper Drill Countersink Set, 10-Piece
Promax 10-pc taper drills and countersink set in a customer made storage box... [read more]   [read 1 reviews and see ratings]

Woodtek 30155, Bits, Drill And Boring, Countersinks, 7pc Tapered Bit Set, Straight Shank
These straight shank bits exactly match the wood screw size.Woodtek® straight shank countersink set has bits with tapered tips for tight-fitting classic screws... [read more]   [read 1 reviews and see ratings]

Woodtek 801446, Bits, Drill And Boring, Countersinks, 3/8" Stop Collar F/ #5-#9 Countersinks
Replacement stop collars for Woodtek® tapered drill bit countersinks.Collars fit the following tapered drill sizes: #5 - 1/8"; #6 - 9/64"; #7 - 5/32"; #8 - 11/64"; #9 - 3/16"; #10 - 13/64"; #12 - 7/32".Imported.... [read more]   [read 1 reviews and see ratings]

5pc Countersink Tool Bit Set Counter Sink for Steel Metal Wood Plastic Aluminum
  [read 3 reviews and see ratings]

SNAPPY 4-Piece Countersinking Drill Set Fits Festool Centrotec Chucks
SNAPPYs quality 4-Piece Countersinking Drill Bit Set is manufactured at close tolerances to fit the precision Festool Centrotec chuck found on most Festool drills, including the very popular Festool CXS Cordless Drill... [read more]   [read 1 reviews and see ratings]

SNAPPY 4-Piece Cabinet Makers Set Fits Festool Centrotec Chucks
SNAPPYs quality 7-Piece Cabinet Makers Drill Bit Set is manufactured at close tolerances to fit the precision Festool Centrotec chuck found on most Festool drills, including the very popular Festool CXS Cordless Drill... [read more]   [read 2 reviews and see ratings]

KEO 53512 Cobalt Steel Single-End Countersink, Uncoated (Bright) Finish, 82 Degree Point Angle, Round Shank, 5/16" Shank Diameter, 1/2" Body Diameter
KEO ZErO flute countersink and deburring tools are simple, all-purpose tools made of Cobalt that provide flawless countersinking and deburring... [read more]   [read 1 reviews and see ratings]

KEO 53513 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 3/8" Shank Diameter, 5/8" Body Diameter
KEO ZErO flute countersink and deburring tools are simple, all-purpose tools made of Cobalt that provide flawless countersinking and deburring... [read more]   [read 2 reviews and see ratings]

Sink, Bathtub & Shower Surface Repair Kit - PRO Bone LCA
The perfect product for repairing all types of plumbing fixture surfaces (sinks, bath tubs, shower surrounds, toilets)... [read more]   [read 3 reviews and see ratings]

Woodtek 122336, Bits, Drill And Boring, Countersinks, 7-Pc Tapered Bit Set-Hex Shank
These hex shank pilot bits exactly match the wood screw size.Woodtek® hex shank wood countersink set has bits with tapered tips for tight-fitting classic screws.Each of the seven drills in these 22 piece sets have a countersink with stop collar to help drill perfect holes.Pilot bits feature a single twist, fast pitch design for wood that ejects chips more efficiently and resists clogging.Four flute countersink bodies leave a clean, sharp hole and the adjustable stop collar allows you to either set the screw head flush with the surface or drill a countersunk hole to accept a plug or button: 3/8" dia... [read more]   [read 1 reviews and see ratings]

Task Tools T60058 High Speed Steel Countersink, 82-Degree Chamfer Angle, 5/8-Inch Diameter
High speed steel construction means fast and smooth countersinking holes and chamfering edges with this countersink bit from Task Tools... [read more]   [read 2 reviews and see ratings]

Task Tools T60038 High Speed Steel Countersink, 82-Degree Chamfer Angle, 3/8-Inch Diameter
High speed steel construction means fast and smooth countersinking holes and chamfering edges with this countersink bit from Task Tools... [read more]   [read 1 reviews and see ratings]

Task Tools T69004 Pilot/Countersink Drill Bit Combo, No.4
Drill clean pilot holes and countersinks with one push of the drill and no swapping bits with this pilot bit/countersink combo from Task Tools... [read more]   [read 1 reviews and see ratings]

2 Pcs 3mm Dia Head HSS Center Spotting Drill Bits Countersinks
Description:Center and spotting drills are traditionally used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking.Used for producing center holds in components or work pieces with require machining between centers.... [read more]   [read 1 reviews and see ratings]

5pc Titanium Countersink Drill Bit Set - 1/4" to 3/4" - Lifetime Warranty
  [read 1 reviews and see ratings]

Senco SFN1 Piston/Driver Assy 1/8 CSK - EA0150
Senco offers technical support for their tools.nContact Senco at 1-800-543-4596 for help... [read more]   [read 1 reviews and see ratings]

Boulderfly Small Body Microstop
  [read 1 reviews and see ratings]

Amana Tool 55227 Carbide Tipped Countersink with No Burning and No Marring Adjustable Depth Stop wit
Carbide-Tipped 82 Countersink with No Burning and Marring Adjustable Depth Stop with No-Thrust Ball Bearing... [read more]   [read 1 reviews and see ratings]

Century Drill and Tool 37404 Screw Drill, Number-4
For drilling the correct pilot hole and recess for countersinking all in one step... [read more]   [read 1 reviews and see ratings]

DISSTON COMPANY 158860 MM QC Countersink Set
Master Mechanic, Quick Change Countersink Set, Drill, Countersink Or Counterbore In Wood, Includes Hex Wrench For Set Screws, Fits All Brands, Speed Shank Eliminates Tool From Slipping In Drill Chuck, Includes 4 Power Groove Countersinks #6-3/32", #8-7/64", #10-1/8" #12-1/8" & A Hex Wrench, Carded.... [read more]   [read 1 reviews and see ratings]

Countersinks & Plug Cutters - PC | SHK Hex | SS 6,8 | PCS 5/16
Wood Owl's countersinks and plug cutters come in various screw sizes and are designed for accuracy and hiding plugged holes in work pieces... [read more]   [read 1 reviews and see ratings]

WELDON WCG-SET MODEL WCGM 82° ZERO FLUTE HSS COUNTERSINK & DEBURRING SET
MODEL WCGM 82 ZERO FLUTE HSS COUNTERSINK & DEBURRING SET... [read more]   [read 1 reviews and see ratings]