Spiral & Trim Bits - Trim

Category Trim has 220 product(s):

Tico-Tico
Rare recordings of the Andrews Sisters with the Vic Schoen Orchestra and with Curt Massey & the Ambassadors.... [read more]   [read 2 reviews and see ratings]

Freud 42-114 Bearing Flush Trim Router Bit 1/2 Diameter, 1/2" shank with TiCo Hi-Density Carbide
Bottom bearing flush trim bit for trimming laminate counter tops and doing pattern work... [read more]   [read 26 reviews and see ratings]

Freud 42-104 1/2-Inch Bearing Flush Trim Bit
The Freud 1/2-Inch Bearing Flush Trim Bit is ideal for trimming cabinet laminate as well as pattern work... [read more]   [read 10 reviews and see ratings]

Freud 50-102 1/2-Inch Top Bearing Flush Trim Bit
Freud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack... [read more]   [read 28 reviews and see ratings]

Freud 42-116 Bearing Flush Trim Bit
Freud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack... [read more]   [read 8 reviews and see ratings]

Freud 88-100 9-Piece Router Bit Set, 1/4-Inch Shank
Are expensive router bits worth the cost? Because of the features found in these Freud bits--long-lasting micrograin carbide/titanium tips, tri-metal brazing, and an antikickback design-- our answer is a resoundingyes... [read more]   [read 4 reviews and see ratings]

Freud 42-100 3/8-Inch Diameter 2-Flute Flush Trimming Router Bit with 1/4-Inch Shank
Freud's precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack... [read more]   [read 2 reviews and see ratings]

Dremel 617 Core Box Router Bit
For routing, inlaying, and mortising in wood and other soft materials... [read more]   [read 4 reviews and see ratings]

Dremel 618 Chamfer Router Bit
For routing, inlaying, and mortising in wood and other soft materials... [read more]   [read 3 reviews and see ratings]

Freud 42-106 1/2-Inch Diameter 2-Flute Flush Trimming Router Bit with 1/4-Inch Shank
The highest quality cabinets deserve the highest quality bits... [read more]   [read 1 reviews and see ratings]

Freud 50-138 2-Inch Diameter Top Bearing Flush Trim Router Bit with 1/2-Inch Shank
The top mounted bearings on these bits make them ideal for lettering or other template work where the work piece is being grooved or routed out... [read more]   [read 3 reviews and see ratings]

Freud 50-103 5/8-Inch Diameter Top Bearing Flush Trim Router Bit with 1/4-Inch Shank
The top mounted bearings on these bits make them ideal for lettering or other template work where the work piece is being grooved or routed out... [read more]   [read 10 reviews and see ratings]

Freud 50-126 1-1/4-Inch Diameter Top Bearing Flush Trim Router Bit with 1/2-Inch Shank
The top mounted bearings on these bits make them ideal for lettering or other template work where the work piece is being grooved or routed out... [read more]   [read 1 reviews and see ratings]

Freud 44-108 1/2-Inch Diameter 3-Flute Flush Trimming Router Bit with 1/2-Inch Shank
The highest quality cabinets deserve the highest quality bits... [read more]   [read 1 reviews and see ratings]

Freud 50-112 1-Inch Diameter Top Bearing Flush Trim Router Bit with 1/2-Inch Shank
The top mounted bearings on these bits make them ideal for lettering or other template work where the work piece is being grooved or routed out... [read more]   [read 2 reviews and see ratings]

Freud 44-100 1/2-Inch Diameter 3-Flute Flush Trimming Router Bit with 1/4-Inch Shank
  [read 1 reviews and see ratings]

Freud 41-110 8-Degree Two Flute Bevel Trim Router Bit with 1/4-Inch Shank
The Freud bevel trim bits are designed to trim and form a bevel on the edge of laminates to eliminate filing... [read more]   [read 1 reviews and see ratings]

Freud 48-102 5/8-Inch Flush Trim and V Groove Router Bit with 1/4-Inch Shank
This bit will bring a cabinet frame flush with the front of the cabinet, or trim a laminated top while adding a small decorative V groove which minimizes visibility of the joint... [read more]   [read 2 reviews and see ratings]

Freud 50-101 1/2-Inch Diameter Top Bearing Flush Trim Router Bit with 1/4-Inch Shank
The top mounted bearings on these bits make them ideal for lettering or other template work where the work piece is being grooved or routed out... [read more]   [read 6 reviews and see ratings]

Freud 44-104 1/2-Inch Diameter 3-Flute Flush Trimming Router Bit with 1/2-Inch Shank
The highest quality cabinets deserve the highest quality bits... [read more]   [read 2 reviews and see ratings]

Freud 50-105 9/16-Inch Diameter Top Bearing Flush Trim Router Bit with 1/4-Inch Shank
The top mounted bearings on these bits make them ideal for lettering or other template work where the work piece is being grooved or routed out... [read more]   [read 2 reviews and see ratings]

Freud 64-100 1/4-Inch Diameter 1-Flute Flush Trimming Router Bit with 1/4-Inch Shank
Our solid carbide flush trim bits will cut plastic laminate quickly and cleanly... [read more]   [read 1 reviews and see ratings]

Freud 41-106 45-Degree Two Flute Bevel Trim Router Bit with 1/4-Inch Shank
The Freud bevel trim bits are designed to trim and form a bevel on the edge of laminates to eliminate filing... [read more]   [read 1 reviews and see ratings]

Dremel 640 1/4-Inch V-Groove Router Bit
Routing bit, 1/4-inch v-groove, high speed steel... [read more]   [read 1 reviews and see ratings]

Dremel 650 1/8 Staight Routing Bit
A high-speed router made from high-grade steel, 1/8" (3,2mm) shank... [read more]   [read 10 reviews and see ratings]

PORTER-CABLE 43516 3/16-Inch Overhang Laminate Trimming Router Bit, 1/4-Inch Shank, Carbide-Tipped
Porter-Cable 43516 3/16-Inch Overhang Laminate Trimming Router Bit, 1/4-Inch Shank, Carbide-Tipped... [read more]   [read 1 reviews and see ratings]

12PC AP Router Bit Set
12 piece 1/4-inch shank carbide general purpose set... [read more]   [read 3 reviews and see ratings]

Grizzly C1083 Flush Trim Bit, 1/2-Inch Shank, 5/8-Inch Diameter
Order G3846 replacement bearing for C1079... [read more]   [read 1 reviews and see ratings]

Grizzly C1531 90° V-Groove Bit (Male) w/ Bearing Guide, 1/4" Shank
Order G3855 replacement bearing.... [read more]   [read 1 reviews and see ratings]

Grizzly C1728 Anti-Kickback 45-Degree Chamfer Bit, 1/2-Inch Shank, 1-1/8-Inch Diameter
Used for beveling and chamfering any solid wood, laminate or wood composite material... [read more]   [read 1 reviews and see ratings]

Roman Carbide DC1455 Solid Carbide Flush Trim and Laminate 1/4-Inch Shank
Used for cutting laminate quickly and neatly... [read more]   [read 1 reviews and see ratings]

Grizzly G9777 Carbide-Tipped Tool Bit Sets, 1/2-Inch, 20-Piece
An exceptional values for carbide lathe tool bits... [read more]   [read 1 reviews and see ratings]

Grizzly H5567 Straight Flush Trim 3-Piece Set, 1/2-Inch Shank
1/2" shank: includes 1/2" x 1 3/16" with bottom guide bearing, 3/4" x 1" with top guide bearing and 1 1/8" x 1 1/8" with top guide bearing.... [read more]   [read 1 reviews and see ratings]

Amana Tool 55500 Adjustable E-Z Dial Slot Cutter Carbide Tipped Router Bit, 1/2-Inch Shank
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Bosch 85269M Laminate Trim Bit 3/8", 1/4" Shank with Baring, Carbide Tip
Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world... [read more]   [read 1 reviews and see ratings]

AMMCO 6918-6 Positive Rake Carbide Insert (6 Pack)
Carbide tool bits are one of the important keys to good rotor and drum surface finishes... [read more]   [read 1 reviews and see ratings]

Freud 50-098 5/16-Inch X 1-Inch Top Bearing Flush Trim Bit 1/4-Inch Shank
5/16"diameter Top Bearing Flush Trim Bit 1"carbide height 1/4"shank 1/2"bearing... [read more]   [read 3 reviews and see ratings]

Freud 99-239 1-1/4-Inch x 1/2-Inch Drawer Lock Bit 1/4-Inch Shank
Drawer Lock Bit 1 1/4"diameter 1/2"carbide height 30?angle 1/4"shank... [read more]   [read 1 reviews and see ratings]

Freud 12-113 7/16-Inch x 1-1/4-Inch Double Flute Straight Bit (1/2-Inch Shank)
7/16" diameter STRAIGHT BIT Double Fute 1 1/4" carbide height 1/2" shank... [read more]   [read 1 reviews and see ratings]

Freud 50-110 7/8-Inch x 1-Inch Top Bearing Flush Trim Bit (1/2-Inch Shank)
7/8"diameter Top BearingFlush Trim Bit 1"carbide height 1/2"shank 7/8"bearing... [read more]   [read 2 reviews and see ratings]

Freud 30-107 1-3/4-Inch x 3/4-Inch Cove Bit (1/2-Inch Shank)
1 3/4"diameter Cove Bit 3/4"carbide height 1/2" bearing 1/2" shank 5/8" radius... [read more]   [read 1 reviews and see ratings]

Vermont American 22633 45 Deg Carbide Chamfer Router Bit
Vermont American router bits are precision-engineered to provide the smoothest, most accurate cutting for all professional users... [read more]   [read 1 reviews and see ratings]

PORTER-CABLE 43253PC 2-Flute Bevel Trimming
Porter-Cable 43253PC 2-Flute Bevel Trimming... [read more]   [read 1 reviews and see ratings]

Magnate 1282 Plunge Flat Roundover Router Bits - 1/8" Radius; 1/2" Small Diameter
This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications... [read more]   [read 1 reviews and see ratings]

Magnate 817 Core Box 2 Flute Carbide Tipped Router Bit - 1-9/16" Cutting Diameter
For use in decorative fluting and sign making... [read more]   [read 1 reviews and see ratings]

Amana Tool 45460-S Dado Clean-Out with Ball Bearing Guide 1/2-Inch Diameter by 1/4-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 2 reviews and see ratings]

Amana Tool 54400 Crown Molding 1-1/4-Inch Diameter by 2-1/4-Inch Cutting Height by 1/2-Inch Shank Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Amana Tool 47150 No-File and Trade Laminate Trim 1/4-Inch Shank Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 2 reviews and see ratings]

Amana Tool 45460 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing, 1/4-Inch Shank
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 4 reviews and see ratings]

Amana Tool 51202 Panel Pilot 7-Degree Bevel 1/4-Inch Diameter x 1/4-Inch Cutting Height x 1/4-Inch Shank 1-Flute Solid Carbide Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Amana Tool 47118 Flush Trim with B.B. Guide 1/2 by 1 by 1/2-Inch Shank 3-Flute Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Amana Tool 47092 Flush Trim with Ball Bearing Guide 1/4-Inch Diameter by 1-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 4 reviews and see ratings]

Bosch 85267M Laminate Trim Bit 1/2", 1/4" Shank with Baring, Carbide Tip
Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world... [read more]   [read 1 reviews and see ratings]

Magnate 1711 Bull Nose (Half Round) Carbide Tipped Router Bit - 1-1/8" Bead Diameter
For bead cutting and edge rounding on picture frames, stair threads, window sills, etc... [read more]   [read 1 reviews and see ratings]

Magnate 5824 Bull Nose (Half Round) Router Bits, With Bearing - 5/8" Bead Diameter
For bead cutting and edge rounding on picture frames, stair threads, window sills, etc... [read more]   [read 1 reviews and see ratings]

Grizzly H6159 Router Bit Set in Aluminum Case, 35-Piece
Grizzly Industrial, Inc... [read more]   [read 3 reviews and see ratings]

Makita 733327-A 3/4-Inch Router Bit, No File Bit, 1/4-Inch Shank
No File Trimmer - Eliminates hand filing of laminates that normally follows trimming... [read more]   [read 1 reviews and see ratings]

WHITESIDE PART #2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1" CL X 1/4" SHANK
WHITESIDE MACHINE 2402 CARBIDE-TIP FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 1/2 DIA X 1" CL X 1/4" SHANK X 2-1/2" OAL... [read more]   [read 4 reviews and see ratings]

Whiteside Router Bits 2401 Flush Trim Bit with 3/8-Inch Cutting Diameter and 1/2-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Freud 50-501 Top & Bottom Bearing Flush Trim Bits 1/4-Inch shank Features Freuds TiCo? Hi-Density Carbide with Titanium
These bits are specially designed to provide precision cuts in almost any timming or pattern routing application... [read more]   [read 8 reviews and see ratings]

Freud 42-204 3/4-Inch Downshear Helix Flush Trim Bit
The Freud 3/4-Inch Downshear Helix Flush Trim Bit is ideal for trimming cabinet laminate as well as pattern work... [read more]   [read 6 reviews and see ratings]

Freud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim Bit
The Freud 50-509 3/4-Inch Top and Bottom Bearing Flush Trim Bit provides precision cuts in almost any trimming or pattern routing application... [read more]   [read 13 reviews and see ratings]

Bosch 85441M 1/2-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Flush Trim Router Bit 1/2-Inch Shank With Ball Bearing
Carbide tipped double laminate flush trimming bits are micrograin bits ideal for fast, smooth, accurate trim cuts with a shielded, compact ball bearing pilot... [read more]   [read 1 reviews and see ratings]

Bosch 85297M 1/2-Inch Diameter 53/64-Inch Cut Carbide Tipped Roundover Router Bit 1/4-Inch Shank With Ball Bearing
Carbide tipped roundover bits are micrograin bits used for smooth, uniformly rounded edges... [read more]   [read 1 reviews and see ratings]

Milwaukee 48-23-7185 1 by 2-9/16-Inch Half-Round Router Bit with 1/2-Inch Shank
Milwaukee router bits feature custom blended micro-grain carbide with titanium to hold a sharp edge longer, resulting in an extended life of the bit... [read more]   [read 1 reviews and see ratings]

MILWAUKEE Router Bit CBD 3/8" x 2-5/16" FLUSH TR Part # 48-23-6515
  [read 1 reviews and see ratings]

Milwaukee 48-23-7730 1-5/32 by 2-3/16-Inch Cove and Bead Router Bit with 1/4-Inch Shank
Milwaukee router bits feature custom blended micro-grain carbide with titanium to hold a sharp edge longer, resulting in an extended life of the bit... [read more]   [read 1 reviews and see ratings]

MILWAUKEE Router Bit CBD 1/2" x 2-5/8" FLUSH TRIM Part # 48-23-6560
  [read 1 reviews and see ratings]

MILWAUKEE Router Bit CBD 1/4" x 1-1/2" TRIM Part # 48-23-7245
Milwaukee router bits feature custom blended micro-grain carbide with titanium to hold a sharp edge longer, resulting in an extended life of the bit... [read more]   [read 1 reviews and see ratings]

Milwaukee 48-23-7445 1-1/4 by 2-5/8-Inch Rounding Router Bit with 1/2-Inch Shank
Milwaukee router bits feature custom blended micro-grain carbide with titanium to hold a sharp edge longer, resulting in an extended life of the bit... [read more]   [read 2 reviews and see ratings]

Grizzly H7693 Deep Plug Cutter, 6-Piece
This versatile buffing system is equally at home in a cabinet shop or on a knife maker Inch or gunsmith-inch bench and is available in either 3450 rpm or 1725 rpm... [read more]   [read 17 reviews and see ratings]

Grizzly H7791 Trim Router, Hi Impact Plastic Body
This Trim Router features a 1/2 HP motor, 350 W, 1.7A and no-load speed of 30,000 RPM and carbon brushes for long life... [read more]   [read 6 reviews and see ratings]

Bosch RBS020XW 3 Piece 1/4-Inch Shank Laminate Trim Router Bit Set
The router bits in the Bosch RBS020XW 3 Piece 1/4-Inch Shank Laminate Trim Router Bit Set are distinguished by a careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges (ground with diamond honed grinding wheels), and low vibration operation as a result of a special casting process during manufacturing... [read more]   [read 9 reviews and see ratings]

RotoZip 75-92285 Laminate Trim Bit 1/4-Inch Shank by Bosch
The bearing of the ROTOZIP Laminate Trim Bit by BOSCH allows you to glide along laminate edges resulting in a clean, professional edge... [read more]   [read 5 reviews and see ratings]

MLCS 8810 Flush and Pattern Trim Router Bit Set, 5-Piece
The 5-Piece MLCS 8810 Flush and Pattern Trim Router Bit Set is 2-flute and carbide-tipped with totally enclosed ball bearing guides... [read more]   [read 12 reviews and see ratings]

Bosch 85421M 5/8-Inch Diameter 25/64-Inch Cut Triple Flute Laminate 9 Degree Trim Router Bit 1/4-Inch Shank With 5/8-Inch Ball Bearing
Carbide tipped triple flute flush and bevel laminate trimmer assemblies are micrograin bits for extra smooth production trimming... [read more]   [read 1 reviews and see ratings]

Bosch 85470M 1-Inch Diameter 5/8-Inch Cut Carbide Tipped Roundover Plunge Router Bit 1/2-Inch Shank
Carbide tipped plunge roundover bits are control cut micrograin bits for special decorative grooving and edging... [read more]   [read 1 reviews and see ratings]

Bosch 85266M 1/2-Inch Diameter 1-Inch Cut Double Flute Laminate Flush Trim Router Bit 1/4-Inch Shank With Ball Bearing
Carbide tipped double laminate flush trimming bits are micrograin bits ideal for fast, smooth, accurate trim cuts with a shielded, compact ball bearing pilot... [read more]   [read 3 reviews and see ratings]

Bosch 85216MC 1/2-Inch Diameter 1-Inch Cut Triple Flute Laminate Flush Trim Router Bit 1/4-Inch Shank With Ball Bearing
Carbide tipped triple flute laminate flush trimming bit is a micrograin bit that provides chatter-free production trimming with an extra smooth, flush trim cut... [read more]   [read 1 reviews and see ratings]

Bosch 85434MC 2-Inch Diameter 1-Inch Cut Carbide Tipped Roundover Router Bit 1/2-Inch Shank With Ball Bearing
Carbide tipped roundover bits are micrograin bits used for smooth, uniformly rounded edges... [read more]   [read 1 reviews and see ratings]

Bosch 85431C Bevel Trim Assembly 1/4-Inch Shank 10 Degree Bevel Router Bit
Carbide tipped double flute laminate trimmer assemblies are micrograin bits ideal for fast, accurate trim cuts... [read more]   [read 1 reviews and see ratings]

Bosch 85285MC 1/4-Inch Solid Carbide Flush Trimmer Bit
Bosch router bits are distinguished for their careful selection of materials, exactly calculated cutting geometry, long bit life, extra sharp cutting edges and low vibration.... [read more]   [read 1 reviews and see ratings]

Mastercut HSS73496MC 36-Piece Router Bit Set
The Mastercut 36-Piece Router Bit Set is a useful and versatile tool collection, providing you with a wide variety of router bit shapes in a handsome and portable wooden case... [read more]   [read 7 reviews and see ratings]

SKIL 91030 Carbide Router Bit Set, 30-Piece
Skil carbide tip bits are engineered to deliver the high-performance and durability that today's growing population of Do-It-Yourselfers demand.... [read more]   [read 3 reviews and see ratings]

Whiteside 3347 Locking Drawer Glue Joints
A key to success when constructing quality drawers is in the quality of the drawer lock bit you use... [read more]   [read 1 reviews and see ratings]

Whiteside 1084 1/2" Shank, Double Flute, Straight Router Bit (Cutting Diameter: 3/4", Cutting Length: 1", Overall Length: 2-3/4")
Straight bits are some of the most common router bits sold... [read more]   [read 1 reviews and see ratings]

Whiteside 3021 Template Router Bit with Ball Bearing Guide (Shank: 1/2", Cutting Diameter: 3/4", Cutting Length: 1-1/4", Overall Length: 3")
Standard Straight 2 flute Template Guide bits... [read more]   [read 1 reviews and see ratings]

Whiteside 3002 Template Router Bit with Ball Bearing Guide (Shank: 1/4", Cutting Diameter: 1/2", Cutting Length: 3/4", Overall Length: 2-1/4")
Tongue and groove joints have been used to strengthen panels since the dawn of woodworking... [read more]   [read 3 reviews and see ratings]

Whiteside Router Bits 3010 Template Bit with Ball Bearing
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 3000 Template Bit with Ball Bearing
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 5 reviews and see ratings]

Bosch 85608M 3/8-Inch x 3/16-Inch Keyhole Router Bit 1/4-Inch Shank
Keyhole bits for plunge and slot cuts... [read more]   [read 1 reviews and see ratings]

Woodline USA WL-1206-6 6-Piece 1/2-Inch Shank Flush Trim Set
The Woodline USA 6-Piece 1/2-Inch Shank Flush Trim Set is perfect for professionals and hobbyists alike... [read more]   [read 1 reviews and see ratings]

CMT 806.690.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 2-Inch Cutting Length, Carbide-Tipped
These new super-duty bits represent the finest of the extensive line of CMT Flush Trim bits with ball bearing guides... [read more]   [read 21 reviews and see ratings]

Whiteside Router Bits 1407 Round Nose Bit with 3/16-Inch Radius, 3/8-Inch Cutting Diameter and 1-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2309 Edge Bevel Bit with 30-Degree 7/8-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2007 Round Over Bit with Ball Bearing
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2325 Edge Bevel Bit with 15-Degree 1-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 2 reviews and see ratings]

Whiteside Router Bits SC41 Round Bottom Veining Bit with Solid Carbide 1/8-Inch Radius and 1/4-Inch Cutting Diameter
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2426 Flush Trim V-Groove Bit with 1/2-Inch Cutting Diameter and 1-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2005 Round Over Bit with Ball Bearing
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2505 Flush Trim Bit with 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 5 reviews and see ratings]

Whiteside Router Bits 2410 Flush Trim Bit with 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 2 reviews and see ratings]

Whiteside Router Bits 2050 Plunge Round Over Bit with Plunge Point 1/8-Inch Radius 3/8-Inch Large Diameter 1/8-Inch Small Diameter
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2405 Flush Trim Bit with 1/2-Inch Cutting Diameter and 1-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 3 reviews and see ratings]

Whiteside Router Bits 2407 Flush Trim Bit with 1/2-Inch Cutting Diameter and 1-1/2-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2640 Laminate Trim Bit with Square Bearing
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 3 reviews and see ratings]

Whiteside 2580 Downshear Flush Trim Bit 3/4CD 2CL w/B4 Bearing 1/2SH 2FL
WHITESIDE MACHINE 2580 CARBIDE-TIP DOWNSHEAR FLUSH TRIM 2 FLUTE ROUTER BIT W/BEARING 3/4 DIA X 2" CL X 1/2" SHANK X 4" OAL... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2470 Overhang Trim Bit with 1/8-Inch Overhang 3/8-Inch Cutting Diameter and 1/2-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Vermont American 23165 Replacement Bearing Set
Vermont American router bits are precision-engineered to provide the smoothest, most accurate cutting for all professional users.... [read more]   [read 1 reviews and see ratings]

MLCS Top and Bottom Bearing Flush/Pattern Flush Trim Bit
MLCS Top & Bottom Mounted Bearing Flush Trim/Pattern Flush Trim bits give the option of mounting your template above or below your workpiece... [read more]   [read 4 reviews and see ratings]

Whiteside UDFT5152 Flush Trim Compression Cut Spiral Router Bit 1/2" D X 1-1/2" CL 1/2" SH 4-1/4" OL
Use a bit that is very efficient at evacuating chips from the hole or the slot it is cutting... [read more]   [read 4 reviews and see ratings]

Freud 89-650 Four Piece Undersized Plywood Router Bit Set 1/2" Shank Ideal for 1/4" to 3/4" Plywood With TiCo Hi-Density Carbide
The Freud DifferenceFreud manufactures some of the most innovative, technologically advanced saw blades in the world... [read more]   [read 12 reviews and see ratings]

Freud 75-508 Flush Trim Upcut Spiral Solid Carbide Router Bit 1/2" Diameter 1/2" Shank With TiCo Hi-Density Carbide
Freud's solid carbide upcut spiral trim bits are perfect for any flush trim or pattern application, especially in abrasive materials like melamine or solid surface.The upcut spiral design clears chips fast... [read more]   [read 1 reviews and see ratings]

Freud 42-202 Downshear Helix Flush Trim Router Bit 3/4" Diameter 1/2" Shank With TiCo Hi-Density Carbide
Freud's downshear cutting angle produces a slicing action for chip-free, splinter free cuts on the top surface of laminates and veneers.The shear action also delivers easier, smooth cuts in thick materials.3/4" diameter, 1" carbide height, 1/2' shank, 3 1/8" Overall Length.... [read more]   [read 1 reviews and see ratings]

Freud 76-508 Flush Trim Downcut Spiral Solid Carbide Router Bit 1/2" Diameter 1/2" Shank With TiCo Hi-Density Carbide
Freud's solid carbide downcut spiral trim bits are perfect for any flush trim or pattern application, especially in abrasive materials like melamine or solid surface... [read more]   [read 1 reviews and see ratings]

Freud 76-509 Flush Trim Downcut Spiral Solid Carbide Router Bit 1/2" Diameter 1/2" Shank With TiCo Hi-Density Carbide
Freud's solid carbide downcut spiral trim bits are perfect for any flush trim or pattern application, especially in abrasive materials like melamine or solid surface... [read more]   [read 1 reviews and see ratings]

Freud 75-509 Flush Trim Upcut Spiral Solid Carbide Router Bit 1/2" Diameter 1/2" Shank With TiCo Hi-Density Carbide
Freud's solid carbide upcut spiral trim bits are perfect for any flush trim or pattern application, especially in abrasive materials like melamine or solid surface.The upcut spiral design clears chips fast... [read more]   [read 3 reviews and see ratings]

Freud 99-460 Brick Molding Router Bit 1/2 inch Shank Matches Industry Standard Profile #180
Freud's new series of architectural molding router bits is ideal for renovators, remodelers, or woodworkers who need to mill a perfect match to standard molding designs.besides matching the most common molding profile, this bit provides the flexibility to mill brick molding and more precisely from the right wood species required by the project... [read more]   [read 5 reviews and see ratings]

CMT 806.191.11 Super-Duty Flush Trim Bit, 1-Inch Cutting Length, 1/4-Inch Shank
New super duty bit which represents the finest of the extensive line of CMT flush trim bits with ball bearing guides... [read more]   [read 3 reviews and see ratings]

Amana Tool 45580 Mortising Down-Shear Design 1-1/4-Inch Diameter by 1/2-Inch Cutting Height by 1/2-Inch Shank 2 Flute Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

CMT 806.127.11 Flush Trim Router Bit 1/4-Inch Shank, 1/2-Inch Bearing, 1/2-Inch Cutting Diameter, 1-Inch Cutting Length
To trim even the most difficult projects, we have designed a series of truly indispensable bits... [read more]   [read 5 reviews and see ratings]

CMT 806.096.11 Flush Trim bit, 1/4-Inch Shank, 1/2-Inch Cutting Length, Carbide-Tipped
To trim even the most difficult projects, we have designed a series of truly indispensable bits... [read more]   [read 2 reviews and see ratings]

Amana Tool 47154 No-File Trim 1/2-Inch Dia x 3/8-Inch Cut Height x 0.015-Inch Radius x 1/4-Inch Shank 2-Flute Carbide Tipped Router Bit with Lower BB
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Timberline 800-240 8" 24T #3 Dado Set
Complete Dado Set - Timberline... [read more]   [read 1 reviews and see ratings]

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped
These new super-duty bits represent the finest of the extensive line of CMT Flush Trim bits with ball bearing guides... [read more]   [read 3 reviews and see ratings]

Amana 47109 FLUSH TRIM DOWNSHEAR 1/2 SHANK
Dynabit Laminate Trim Router Bits... [read more]   [read 1 reviews and see ratings]

CMT 806.628.11 Flush Trim bit, 1-Inch Cutting Length, 1/2-Inch Shank
This tough, versatile, fast-cutting CMT Flush trim bit is ideal for a wide variety of trimming jobs... [read more]

Amana Tool 47126 Flush Trim Extra Long with Ball Bearing Guide 1/2-Inch Diameter by 2-Inch Cutting Height by 1/2-Inch Shank Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Amana Tool 45461 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 1-1/4-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Timberline 120-10 Flush Trim with Upper Ball Bearing Guide 1/2-Inch Diameter by 1-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit
If you're looking for router bits that offer superior cuts and smooth performance at prices that can't be beat --- then look no further... [read more]   [read 6 reviews and see ratings]

Timberline 608-112 Quick Release Countersink for #6 Wood Screw Size by 3/32-Inch Diameter by 3/8-Inch Countersink Diameter by 1/4-Inch Hex Shank, Carbide Tipped
If you're looking for Countersinks that offer superior cuts and smooth performance at prices that can't be beat --- then look no further... [read more]   [read 2 reviews and see ratings]

Amana 47111 FLUSH TRIM DOWNSHEAR 1/4 SHANK
Dynabit Laminate Trim Router Bits... [read more]   [read 1 reviews and see ratings]

Amana RC-1014 BEVEL TRIM 45 DEGREE REP. CAR.
Insert Bevel Trim Router Bits... [read more]   [read 1 reviews and see ratings]

Amana 45362 PLUNGE 3/4 DIA UPPER BB 1/2SHK
The shear face cuts faster, cleaner and lasts longer than straight face because of the chip removal speed... [read more]   [read 1 reviews and see ratings]

Timberline 20200 Adjustable 7/16 to 19/32-Inch Diameter x 7/16-Inch Cut Height x 3/32 to 9/32-Inch Shank 2-Flute Carbide Tipped Countersink
Whether you're a serious woodworking enthusiast or a professional contractor you're sure to find the tool you need - at an attractive price... [read more]   [read 2 reviews and see ratings]

Amana Tool 45360 Down Shear Face Plunge Template 2-Flute Carbide Tipped Router Bit with Ball Bearing, 1/2-Inch Shank
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Timberline 120-14 Plunge W/Upper B.B
Flush Trim Plunge Template Router Bits w/ Upper Ball Bearing... [read more]   [read 1 reviews and see ratings]

Amana Tool 45481 Flush Trim/Pattern Plunge 1/2-Inch Diameter by 3/8-Inch Cutting Height by 1/4-Inch Shank Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 3 reviews and see ratings]

Amana Tool 45364 Down Shear Plunge Template 3/4-Inch Dia x 2-Inch Cut Height x 1/2 Shank 2-Flute Carbide Tipped Router Bit with Upper Ball Bearing
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 5 reviews and see ratings]

Timberline 190-10 Flush Trim with Upper Ball Bearing Guide 3/8-Inch Diameter by 1-Inch Cutting Height by1/4-Inch Shank Carbide Tipped Router Bit
If you're looking for router bits that offer superior cuts and smooth performance at prices that can't be beat - then look no further... [read more]   [read 1 reviews and see ratings]

Amana 46300 SC SPIRAL FLUSH TRIM 1-1/4 2BB
Amana 46300 SC SPIRAL FLUSH TRIM 1-1/4 2BBSKU AMA-46300... [read more]   [read 1 reviews and see ratings]

Timberline 3400 Double Edge Laminate/Veneer Trimmer for Material 1/2-Inch to 1-Inch Thick, Adjustable/Replaceable Steel Knives
If you're looking for laminate trimmers that offer superior cuts and smooth performance at prices that can't be beat --- then look no further... [read more]   [read 4 reviews and see ratings]

Freud 99-465 Door and Window Casing Router Bit 1/2 inch Matches Industry Standard Profile #356
Freud's new series of architectural molding router bits is ideal for renovators, remodelers, or woodworkers who need to mill a perfect match to standard molding designs.besides matching the most common molding profile, this bit provides the flexibility to mill case molding and more precisely from the right wood species required by the project... [read more]   [read 4 reviews and see ratings]

Freud A90210 Avanti 5 Piece Introductory Router Bit Set 1/4 inch Shank
Freud's Five Piece Avanti Router Bit set provides an economical yet very useful introduction for the novice woodworker.The set contains a Round nose bit, rabbeting bit, round over bit, roman ogee bit, and a chamfer bit... [read more]   [read 1 reviews and see ratings]

PORTER-CABLE 43671PC Bearing Guided Dado Router Bit
The PORTER-CABLE 43671PC Bearing Guided Dado Router Bit is designed for mortising of doors to accept hinge butts - use with No.59370 for 3", 3-1/2", and 4" hinges... [read more]   [read 5 reviews and see ratings]

PORTER-CABLE 43187PC Laminate Flush Trim, Three Flute Router Bit
Extra-smooth trimming bit... [read more]   [read 1 reviews and see ratings]

Infinity Tools 00-113, 7-Piece Professional Router Bit Set
Our 7-piece Professional router bit set includes seven must have router bits plus one essential bearing kit... [read more]   [read 1 reviews and see ratings]

Magnate 381TF Double Bearing Flush Trim Router Bits - 3 Flute; 1/2" Overall Diameter
This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications... [read more]   [read 1 reviews and see ratings]

Infinity Tools 06-690B, 1/2" Shank Double Bearing Pattern Router Bit, 3/4" Cutter Diam., 2" Cutter Height With Downshear Cutting Action
Template guided pattern work is one of the most common (and sometimes frustrating) routing applications... [read more]   [read 1 reviews and see ratings]

Infinity Tools 06-127B, 1/4" Shank Double Bearing Pattern Router Bit, 1/2" Cutter Diam., 1" Cutter Height With Downshear Cutting Action
Template guided pattern work is one of the most common (and sometimes frustrating) routing applications... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2710 Combination Flush Trim Bit with Top and Bottom Bearing
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 1 reviews and see ratings]

Whiteside Router Bits 2605 Down Shear Flush Trim Bit with 1/2-Inch Cutting Diameter and 1-Inch Cutting Length
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction... [read more]   [read 2 reviews and see ratings]

CMT 807.690.11 3-in-I Flush Trim Bit for MDF & Laminates, 5/8-Inch Cutting Length, 1/2-Inch Shank
3in1 New flush trim bits with Delrin Triangular bearings is your best partner for laminate trimming... [read more]   [read 1 reviews and see ratings]

Kempston 151006 Flush Trim Bit, 1/4-Inch Shank, 1/4-Inch Cutting Diameter by 3/4-Inch Cutting Length
Kempston Corporation supplies you a reliable carbide router bit designed to meet the needs of the serious woodworker... [read more]   [read 1 reviews and see ratings]

Amana Tool 45487 Flush Trim Template and Pattern Plunge 2-Flute Carbide Tipped Router Bit with Ball Bearing, 1/4-Inch Shank
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 6 reviews and see ratings]

Big Horn 18100 Router Table Insert
9-Inch by 12-Inch by 3/8-Inch router table insert accommodates heavy routers... [read more]   [read 8 reviews and see ratings]

Roman Carbide DC1082 1/2-Inch Flush Trim, 1/2-Inch Shank
Excellent for smooth trimming of wood, wood composites, laminate or man-made materials, such as Corian.... [read more]   [read 1 reviews and see ratings]

Vermont American 23159 1/2-by-1-Inch Flush Trim Router Bit, 1/4-Inch Shank
Vermont American router bits are precision-engineered to provide the smoothest, most accurate cutting for all professional users.... [read more]   [read 3 reviews and see ratings]

Vermont American 23161 1/2-by-1-Inch Straight Router Bit, 1/2-Inch Top Ball Bearing 1/4-Inch Shank
Vermont American router bits are precision-engineered to provide the smoothest, most accurate cutting for all professional users.... [read more]   [read 2 reviews and see ratings]

Pattern Flush Trim Router Bit, 3/4'' Diameter x 1-1/4'' Height (1/2'' Shank)
Two flutes, for fast, smooth, accurate trim cuts... [read more]   [read 3 reviews and see ratings]

Rockler Veneer Trimming Guide
Reface cabinets like a pro with this inexpensive and easy-to-use trimming guide! According to "Refacing Cabinets" author Herrick Kimball, "The Rockler Veneer Trimming Guide is an essential tool for any kitchen refacing project." It's designed for easy removal of veneer "ears", aids in trimming off excess veneer flush with the back side of the face frame, square-cutting rail and stile joints, and more... [read more]   [read 1 reviews and see ratings]

2-In-1 Cornering And Veneer Trimming Tool
The affordable and easy to use 2-in-1 cornering and trimming tool is perfect for "easing off" 90 degree corners and trimming veneers... [read more]   [read 1 reviews and see ratings]

CMT 191.507.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/2-Inch
The new CMT solid carbide spiral flush trim bit is manufactured with a special supermicrograin formulation that has increased hardness with a higher transverse rupture point... [read more]   [read 2 reviews and see ratings]

CMT 192.507.11B Solid Carbide Downcut Spiral Flush Trim Bit, 1/2-Inch
The new CMT solid carbide spiral flush trim bit is manufactured with a special supermicrograin formulation that has increased hardness with a higher transverse rupture point... [read more]   [read 2 reviews and see ratings]

MLCS 10807 TripleWing Flush Trim Bit 1/2-Inch Diameter by 2-Inch Cutting Length
MLCS Tri (TM) carbide-tipped router bits are at the vanguard of routing technology... [read more]   [read 14 reviews and see ratings]

MLCS TripleWing (TM) Flush Trim Bit 1/2" Diameter x 1-3/16" Cutting Length
MLCS TripleWing (TM) carbide-tipped router bits are at the vanguard of routing technology... [read more]   [read 1 reviews and see ratings]

CMT 816.064.11 Panel Pilot Bit with Guide, 1/4-Inch Diameter with 1/4-Inch Shank
Make openings paneling, drywall, siding, doors or windows quickly... [read more]   [read 2 reviews and see ratings]

Freud 85-296 1/8-Inch Overhang by 1-1/2-Inch Height Overhang Trim Router Bit with 1/2-Inch Shank and 5-Degree Radiuses Bearing
Covered by Freud's limited lifetime warranty... [read more]   [read 1 reviews and see ratings]

Freud 42-310 3/4-Inch by 1-Inch Down Shear Helix Flush Trim Router Bit
Covered by Freud's limited lifetime warranty... [read more]   [read 1 reviews and see ratings]

Freud 85-227 3/4-Inch Diameter by 1-3/4-Inch Height Solid Surface Flush Trim Router Bit with 1/2-Inch Shank
Covered by Freud's limited lifetime warranty... [read more]   [read 1 reviews and see ratings]

Amana Tool 47096 Flush Trim Double Ball Bearing Multi Trimmer 3/4 Diameter by 1-1/4-Inch Cutting Height by 1/2-Inch Shank Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 2 reviews and see ratings]

CMT 814.595.11 Round Nose Bit with 3/16-Inch Radius, 1/2-Inch Shank
Decorate doors, drawer fronts, panels or any flat surface with this bit... [read more]

MLCS 5089 1/4-Inch Shank Solid Carbide Downcut Flush Trim Router Bit
MLCS solid carbide down cut flush trim router bit... [read more]   [read 3 reviews and see ratings]

MLCS 7399 1/2-Inch Shank Solid Carbide Upcut Flush Trim Router Bit
MLCS solid carbide up cut flush trim router bit... [read more]   [read 1 reviews and see ratings]

MLCS 8369 1/2-Inch shank Carbide-tipped Router Bit Set, 30-Piece
MLCS high quality router bit set at an incredible price... [read more]   [read 12 reviews and see ratings]

Ryobi A25RB12 1/2-in Rabbetting Router Bit
Includes 1/2-in Rabbetting Router Bit - A25RB12... [read more]   [read 1 reviews and see ratings]

Neiko Tools USA 15 piece Tungsten Carbide Router Bit Set
15pc Tungsten Carbide Router Bit Set... [read more]   [read 1 reviews and see ratings]

Trend T103X1/4TC 1/2-Inch Guided Flush Trim Plunge Carbide Tipped Router Bit, 1/4-Inch Shank 1-1/4-Inch Cut
Trend's router bits are manufactured to a professional standard with microgranular tungsten carbide tips to ensure sharpness and long life for use on hardwood and softwood, fiberboard, plywood and particle board... [read more]   [read 1 reviews and see ratings]

Trend T092X1/4TC 3/8-Inch Guided Flush Trim Carbide Tipped Router Bit, 1/4-Inch Shank 1-Inch Cut
Trend's router bits are manufactured to a professional standard with microgranular tungsten carbide tips to ensure sharpness and long life for use on hardwood and softwood, fiberboard, plywood and particle board... [read more]   [read 1 reviews and see ratings]

CMT 191.008.11B Solid Carbide Upcut Spiral Flush Trim Bit, 1/4-Inch
The new CMT solid carbide spiral flush trim bit is manufactured with a special supermicrograin formulation that has increased hardness with a higher transverse rupture point... [read more]   [read 4 reviews and see ratings]

Amana 48101 2 FLUTE 1-1/8"D AMEROCK HINGE
Special Amerock Hinge Router Bits... [read more]   [read 1 reviews and see ratings]

Woodpeckers 18" Router Bit Rack
Most of us woodworkers spend small fortunes on router bits... [read more]   [read 1 reviews and see ratings]

Freud 50-116 Top Bearing Flush Trim Router Bit, 3/4-Inch Diameter by 1-Inch Carbide Cutting Length 1/2-Inch Shank
Freud's top bearing flush trim bits are ideal for template work or lettering where the work piece is being grooved or routed out... [read more]   [read 8 reviews and see ratings]

Freud 41-502 Radius - Laminate Trim Bit with Smooth Rounded Edge, 1/4-Inch Shank
Freud's new "Radius" Laminate Trim Bit for Formica, Wilsonart and Similar Grade Laminate Countertops is designed to elimante the hours of difficult hand filing normally required to finish the edges of plastic laminates... [read more]   [read 7 reviews and see ratings]

Freud 50-118 Top Bearing Flush Trim Router Bit, 3/4-Inch Diameter by 1-3/4-Inch Carbide Cutting Length 1/2-Inch Shank
Freud's top bearing flush trim bits are ideal for template work or lettering where the work piece is being grooved or routed out... [read more]   [read 11 reviews and see ratings]

Weld-Aid Wa B-100 Bright Galv 12.5 Oz (388-B-100) Category: Corrosion Inhibitors
Item #: 388-B-100... [read more]   [read 1 reviews and see ratings]

Amana Tool MR0102 Flush with Mini Ball Bearing Guide 3/16-Inch Diameter, 7/16-Inch Cutting Height, 1/4-Inch Shank Carbide Tipped Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 2 reviews and see ratings]

Amana Tool 51200 Panel Pilot Flush 1/4-Inch Diameter x 1/4-Inch Cutting Height x 1/4-Inch Shank 1-Flute Solid Carbide Router Bit
Since 1972, Amana Tool has been producing router bits and has become the global leader in its field... [read more]   [read 1 reviews and see ratings]

Amana 51432 METAL LAMINATE FLUSH TRIM 1/2
These innovative new bits are specially designed and tested for trimming all decorative metal laminates and has been recommended by Formica, for use in all DecoMetal material (exluding #2178) & Advanced Technology Inc... [read more]   [read 1 reviews and see ratings]

MLCS 6354 Round Over 3/8-Inch Radius Router Bit, 1/4-Inch Shank
MLCS Round Over Bit is 2 flute, Carbide Tipped with totally enclosed ball bearing guides... [read more]   [read 1 reviews and see ratings]

MLCS 8655 Round Over 1/2-Inch Radius Router Bit, 1/2-Inch Shank
MLCS Round Over Bit is 2 flute, Carbide Tipped with totally enclosed ball bearing guides... [read more]   [read 1 reviews and see ratings]

Yonico 14120 Flush Trim Solid Carbide Spiral Down-Cut Router Bit 1/4-Inch Shank
This solid carbide flush trim router bit is designed to provide precise, efficient cuts and offers extreme durability... [read more]   [read 4 reviews and see ratings]

Buffalo Tools TRIMBX Trim Router
Buffalo Tools TRIMBX Trim Router.... [read more]   [read 17 reviews and see ratings]

Amana 51522 ALUMINUM FLUSH TRIM 1/4 D DOWN
Aluminum Cutting, Solid Carbide Spiral Flush Trim Router Bits... [read more]   [read 1 reviews and see ratings]

Big Horn 19038 2-In-1 Edge Trimmer
Use Big Horn's 2-In-1 edge trimmer on veneer and laminate for trimming and rounding corners... [read more]   [read 2 reviews and see ratings]

Stalwart 75-RTB5 Carbide Router Bit Set, 5-Piece
The Trademark Tools Carbide Router Bit Set provides nearly limitless options... [read more]   [read 2 reviews and see ratings]

WoodRiver Double Fluted Straight Router Bit, 1/4"SH 5/16"D 1"CL
The anti-kickback design of these industrial quality carbide router bits limits stock feed rate for safer router operations... [read more]   [read 1 reviews and see ratings]

1/4" Shank 3/4" Cutting Diameter Double Flute Round Nose Bit
Double flute design for effectively working... [read more]   [read 1 reviews and see ratings]

Steelex D3725 Carbide Tipped Router Bit Set, 1/2-Inch, 24-Piece
This 24-Piece Carbide Tipped Router Bit Set includes all of the most commonly used router bits conveniently arranged in a flip-out display case... [read more]   [read 2 reviews and see ratings]

Roman Carbide DC1829 Straight Flush Trim Set, 1/4-Inch Shank, 3-Piece
Three piece straight flush trim set.... [read more]   [read 1 reviews and see ratings]

Roman Carbide DC1830 Straight Flush Trim Set, 1/2-Inch Shank, 3-Piece
Three piece straight flush trim set.... [read more]   [read 1 reviews and see ratings]

Guhdo Gmaxx Series 7810.1048 Guided 1/2 Shank 1/2 1-1/2-Inch Cut Flush Trim Router Bit
GUHDO introduces a premium line of router bits in the United States under its new Gmaxx series of superior quality cutting tools designed and manufactured for professionals and discerning hobbyists... [read more]   [read 1 reviews and see ratings]

Vewerk 11 Piece Mini Panel Removal Set - BER5405
BERGEN Professional 11 Piece Mini Panel Trim Removal Set BERGEN Tools, Vewerk need we say more,.This set includes eleven different sizes and styles of tools that allow easily removal of trim fasteners, door panels, mouldings and wheel hubs.Perfect for all trims inside and outside of cars, vans and utility vehicles.These tools make removing the trims, screws clips, upholstery and attachments on your vehicle very easy and painless... [read more]   [read 1 reviews and see ratings]

Quiet Cool 1500 Classic Whole House Fan
This quiet whole house fan installs very easily, in most cases, in less than an hour.nnThe QC1500 is mounted in the attic by being suspended from the rafters unlike traditional ceiling mount whole house fans... [read more]   [read 2 reviews and see ratings]

Eagle America 117-0842 Down Shear Flush Trim Bit with 1/2-Inch Diameter, 1/4-Inch Shank, 1-Inch Cut Length Carbide Tipped
These are the bits you can count on for smooth, burn free cutting... [read more]   [read 1 reviews and see ratings]

Big 45 Degree 1/2" Shank 1" Cut Length Chamfer Router Bit
The cut is cover by a detachable material avoid hurt your finger, take it off before you use it... [read more]   [read 1 reviews and see ratings]

Trim Bin, Two Part Trimming Station
Trim Bin, Two Part Trimming Station... [read more]   [read 3 reviews and see ratings]

Metal 2 Flutes 1/2" x 1/2" Rabbet Router Bit w Bearing Tool
Good for easy wood joining... [read more]   [read 1 reviews and see ratings]

3/16" Cut Depth 1/2" Straight Shank 2 Flutes Slot Undercut Router Bit
Slot and Undercut Router Bit - 1/2" Shank, 2 Flutes, 3/16" Cutting depth, 1 1/4" Cutting length.Great for woodworking person.... [read more]

Whiteside Model UDP9112 Ultimate Spiral Pattern Bit 1/2" SH x 7/8" D x 1-1/8" CL
The Ultimate in flush trim bits - if you use a lot of templates or use a router bit to flush trim, then this is the best that you can buy... [read more]   [read 1 reviews and see ratings]

Whiteside Model UDFT9112 Spiral Flush Trim 1/2" SH X 7/8" D X 1-1/8"CL
The Ultimate in flush trim bits - if you use a lot of templates or use a router bit to flush trim, then this is the best that you can buy... [read more]   [read 1 reviews and see ratings]

Whiteside Model UDC9112 Spiral Combination 1/2" SH X 7/8" D X 1-1/8"CL
The Ultimate in flush trim bits - if you use a lot of templates or use a router bit to flush trim, then this is the best that you can buy... [read more]   [read 5 reviews and see ratings]

Woodline USA's WL 1207 Carbide Tipped Flush Trim Router Bit 1/2-Inch Shank, 1/2-Inch Bearing, 1/2-Inch Cutting Diameter, 1-1/2-Inch Cutting Length
Two-flute trim bits allow quicker chip clearance for applications when speedy cutting is called for... [read more]   [read 1 reviews and see ratings]

CMT 806.690.11B Flush Trim Bit with Double Bearing, 2-Inch Cutting Length and 1/2-Inch Shank
Innovative two-flute router bit equipped with a double bearing and feature a down shear design, which allows for clean smooth cuts on many materials... [read more]   [read 3 reviews and see ratings]

Rockler High Pressure Laminate Router Table, Fence, & FX Router Lift
Our High Pressure Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and an included dust port... [read more]   [read 2 reviews and see ratings]

Freud 77-216 1/2-Inch Diameter by 2-Inch Height Double Compression Bit with 1/2-Inch Shank
Covered by Freud's limited lifetime warranty... [read more]   [read 1 reviews and see ratings]

2.8" Color TFT Fingerprint Time Attendance Time Clock ZDC20
Item feature1... [read more]   [read 4 reviews and see ratings]

Dremel TR563 Carbide Laminate/Sheet Metal Bit 2-Pack
A high-speed cutter with a 3/16-Inch steel shank ideal for cutting soft wood, hardwood, plywood/composites, laminate; sheet metal/engineered flooring, drywall, acoustic tile, plastics, fiberglass, vinyl siding and aluminum... [read more]   [read 1 reviews and see ratings]

DoubleRock Button Tufting Foam Cutter Set
The DoubleRock Button Tufting Foam Cutter Set combines all 3 size cutters into one package... [read more]   [read 1 reviews and see ratings]

CMT 84201 Contractor Solid Carbide Laminate Trimmer Bit, 1/4-inch Diameter, 1/4-Inch Shank, Flush cut
CMT Contractor Tools is a new brand designed to fit the needs of contractors and remodelers... [read more]   [read 1 reviews and see ratings]