Lathe Accessories - Turning Tools

Category Turning Tools has 304 product(s):

Jet 709160 LCS-3P 3-Piece Pen Chisel Set
The Jet LCS-3P 3-Piece Pen Chisel Set is ideal for pen making and other similar projects... [read more]   [read 1 reviews and see ratings]

JET 709163 Mini Lathe Turning Set, 5-Piece
These superior lathe chisels from Jet are hot forged, ground and fitted by hand... [read more]   [read 8 reviews and see ratings]

Delta 46-730 Set of 8 Wood Lathe Turning Tools
Delta 46-730 Set of 8 Wood Lathe Turning Tools... [read more]   [read 5 reviews and see ratings]

DELTA 46-671 Micro Turning Tools
Delta 46-671 Micro Turning Tools... [read more]   [read 2 reviews and see ratings]

Steelex D2228 Lathe Chisel Set, 8-Piece
This 8-piece Lathe chisel set features handles that are proportionately longer than the cutting ends for outstanding control.... [read more]   [read 4 reviews and see ratings]

Sorby B809192 Skew Chisel, 3/4-Inch
Delicately balanced Skew Chisels feature oval profiles for gliding effortlessly along the tool rest for smoothing cylinders, cleaning end grain and cutting shallow curves, beads, pummels and V-cuts... [read more]   [read 1 reviews and see ratings]

Sorby B842104 Bowl Gouge, 3/8-Inch
Milled from round bar, giving both mass and stability, these tools can produce either massive profiling cuts or delicate finishing cuts... [read more]   [read 7 reviews and see ratings]

Grizzly B859004 Swan Neck Hollowing Tool, 24-Inch
These tools are suitable for blind turning or undercutting where reach is restricted... [read more]   [read 2 reviews and see ratings]

Sorby B828192 Curved Scraper
The curved end profile makes this scraper excellent for creating, smoothing and blending curved surfaces in bowl work... [read more]   [read 1 reviews and see ratings]

Sorby B843193 Roughing Out Gouge, 3/4-Inch
Robert Sorby H0496 3/4-Inch Roughing-Out Gouge... [read more]   [read 2 reviews and see ratings]

Sorby B812192 Spindlemaster, 3/4-Inch
It beads, coves, planes, trims end grain and much more! Easy to use and sharpen, its enhanced cutting tip, shear cutting action and polished bevel produce superb results across a wide variety of woods including softer species like pine... [read more]   [read 2 reviews and see ratings]

Grizzly RS200KT Multi Tip Hollowing Tool
Combines a shear scraper with a hollowing tool and includes two double-ended HSS hollowing tips, HSS cutter, hex key and full instructions... [read more]   [read 3 reviews and see ratings]

Sorby RS233C Ball Swan Neck Tips
These tools are suitable for blind turning or undercutting where reach is restricted... [read more]   [read 1 reviews and see ratings]

Grizzly H3405 Spur Center, 4 Spurs, MT1
Offset spurs reduce splitting... [read more]   [read 4 reviews and see ratings]

2.5" 4-Jaw Independent Chuck
4-jaw independent chucks allow work to be held either perfectly on center or purposely off-center by adjusting each of the four jaws independently... [read more]   [read 1 reviews and see ratings]

3.1" 3-Jaw Self-centering Chuck
Self-centering chucks utilize a spiral scroll that causes all three jaws to close on the part at the same time when the outer ring of the chuck is turned in relation to the body... [read more]   [read 2 reviews and see ratings]

RAZERTIP LARGE SKEW
Razertip tools have been setting the standard in Canada for 14 years and they are now available in the US.... [read more]   [read 3 reviews and see ratings]

Grizzly H5871 8-Piece HSS 5/16-Inch Mini Too Length Set
This Mini Tool Set is made from pre-ground high speed steel and includes: Offset right and left hand tools with chip breaker, straight and chip breaker style threading tools, parting tool with chip breaker, boring tool and two turning tools.... [read more]   [read 1 reviews and see ratings]

Grizzly H5869 8-Piece HSS 1/8-Inch Mini Too Length Set
This 1/8" 8 Piece Mini Tool set tools are pre-ground high speed steel and include offset right and left hand tools with chip breaker, straight and chip breaker style threading tools, parting tool with chip breaker, boring tool and two turning tools.... [read more]   [read 1 reviews and see ratings]

JET 709502 Step Jaw Set
These jaws are designed to grip in the contraction mode... [read more]   [read 2 reviews and see ratings]

Jet 709933 Live Center # 2 MT
Our live centers are constructed with two high-quality sealed ball bearings mounted in tandem and lubricated for life... [read more]   [read 2 reviews and see ratings]

Jet 709505 Premier PowerGrip Jaws
The Jet Premier PowerGrip Jaws are designed especially for use with the SuperNova chuck to provide extra strong gripping power... [read more]   [read 1 reviews and see ratings]

Nikcole GW-60-R 60 Degree TIN Coated Right Hand Threading Insert. Mini grooving system.
Nickole mini-groove system... [read more]   [read 1 reviews and see ratings]

Nikcole SG-0.7-R .027"/0.7mm TIN Coated Right Hand Grooving Insert. Mini grooving system.
Nikcole mini-groove system... [read more]   [read 1 reviews and see ratings]

Nikcole SG-0.8-R .031"/0.8mm TIN Coated Right Hand Grooving Insert. Mini grooving system.
Nikcole mini-groove system... [read more]   [read 1 reviews and see ratings]

1/2' Square X 4' Long M2 High Speed Steel Ground Tool Bit
Ground, high speed steel... [read more]   [read 1 reviews and see ratings]

3/8" Square X 6" Long High Speed Steel M2 Tool Bit
For use in lathe tool holders or tool posts... [read more]   [read 1 reviews and see ratings]

1/8' Square X 2-1/2' Long 5% Cobalt Tool Bit
Ground, high speed steel... [read more]   [read 1 reviews and see ratings]

1/2" Square X 6" Long 5% Cobalt Tool Bit
For use in lathe tool holders or tool posts... [read more]   [read 1 reviews and see ratings]

3/8" Square X 6" Long 5% Cobalt Tool Bit
For use in lathe tool holders or tool posts... [read more]   [read 1 reviews and see ratings]

DELTA 46-625 Lathe Spindle Turning Tools, Set of 6
This set of six ELTA 46-625 Lathe Spindle Turning Tools includes everything you'll need whether you're a seasoned wood-working professional or a weekend hobbyist... [read more]   [read 2 reviews and see ratings]

Klein Tools 5207XL Electrician's Leather Tool Belt
Since 1857, the company operated by Mathias Klein and his descendants to the fifth generation, has grown and developed along with the telecommunications and electrical industries where Klein pliers first found major usages... [read more]   [read 3 reviews and see ratings]

1" - 8 TPI - STRONGHOLD CHUCK PACKAGE
The STRONGHOLD CHUCK is very popular among novice and advanced woodturners alike... [read more]   [read 1 reviews and see ratings]

5/8" Mastercut Bowl Gouge
This gouge was designed with a big, wide open flute to allow maximum chip flow... [read more]   [read 1 reviews and see ratings]

Long Tool Handle
Our heavy duty steel handles are covered in thick plastic for an extremely confortable feel... [read more]   [read 1 reviews and see ratings]

Termite
This amazing tool is the answer to your prayers! Turning end grain with this tool is easy and creates an amazing finish... [read more]   [read 1 reviews and see ratings]

Legendary Voices of the Past
  [read 1 reviews and see ratings]

1/2 inch Thread-Lok Ferrule
Do you have any old gouges lying around but don't use them as they don't feel right in your hand or the handle is cracked or broken? Do you have the ability to turn your own tool handles, but not sure how to connect them with the tool? This ingenious product could be the answer to your prayers... [read more]   [read 1 reviews and see ratings]

PSI Woodworking LCHSS8 HSS Wood Lathe Chisel Set, 8-Piece
We have assembled this 8-piece set to satisfy the majority of your turning needs... [read more]   [read 86 reviews and see ratings]

PSI Woodworking LCVERSA 2 Piece Set of Wood Lathe Versa Chisels
Versa Chisels perform as a scraper, skew & gouge... [read more]   [read 15 reviews and see ratings]

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set
Turn beads like at expert! Take the mystery and skill out of cutting perfect beads to exact sizes with this 4 piece HSS Bead Cutting Chisel Set... [read more]   [read 24 reviews and see ratings]

PSI Woodworking LCPM3 3 Piece HSS Pen Turning Lathe Chisel Set
Upgrade to this Benjamin's Best professional chisel set... [read more]   [read 15 reviews and see ratings]

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set
Ideal 5 piece wood lathe chisel set for small detailed turning projects on your mini lathe.Premium long lasting HSS blades with beautifully turned and stained hardwood handles and brass ferrules... [read more]   [read 43 reviews and see ratings]

PSI Woodworking LCAN6M HSS Midi Lathe Chisel Anniversary Set, 6-Piece
All the chisels you need for your midi lathe... [read more]   [read 13 reviews and see ratings]

PSI Woodworking LCPM3CAR 3 Piece Carbide Tipped Pen Turning Lathe Chisel Set
Exclusive 3 -piece set of carbide tipped chisels that may never need sharpening... [read more]   [read 11 reviews and see ratings]

PSI Woodworking LCBT4 4 Piece Bowl Turning Lathe Chisel Set
With the PSI Woodworking LCBT4 4 Piece Bowl Turning Lathe Chisel Set, we've taken the guess work out of the choice of chisels and gouges needed when you want to turn a bowl... [read more]   [read 18 reviews and see ratings]

PSI Woodworking LCAN6S 6 Piece HSS Standard Chisel Anniversary Lathe Chisel Set
This is a set of the most practical assortment of standard length lathe chisels frequently used in wood turning... [read more]   [read 3 reviews and see ratings]

PSI Woodworking LCAN8MD HSS Micro Detailing Anniversary Lathe Chisel Set, 8-Piece
Turn fine details on larger turning or turn tiny intricate projects with this terrific micro set... [read more]   [read 25 reviews and see ratings]

PSI Woodworking LCSIXW High Speed Steel Wood Lathe Chisel Turning Set, 6-Piece
This exquisite full size high speed steel 6-Piece chisel set is a great value.... [read more]   [read 22 reviews and see ratings]

Skew Products SPK-4040 Straight & Offset Multi-Bit Driver Kit
The Bevel gear offset driver with 12 position stabilizer wing has a fluted, comfort grip handle in addition to a snap-cap storage compartment.... [read more]   [read 11 reviews and see ratings]

TeknaTool NOVA-G3 TEKNATOOL« NOVA G3 CHUCK -
The new Nova G3  chuck is the next generation smaller geared chuck.  It's an ideal chuck for Mini, Midi and smaller lathes with up to 14" diameter swing.  Features at a glance  Fast, precise and powerful geared action... [read more]   [read 2 reviews and see ratings]

PSI Woodworking Products LCJC8 8-1/2-Inch Bowl Finishing Chuck
Introducing the breakthrough convenience of our new Dedicated Bowl Finishing Chuck... [read more]   [read 3 reviews and see ratings]

PSI Woodworking Products LCSIDE2 Round Side Scraper Chisels, 2-Piece set
A Round Side Cut Scraper blade for turners who prefer to make their own handles... [read more]   [read 26 reviews and see ratings]

PSI Woodworking Products LCJAWSJ 2-1/2-Inch Long Soft Jaw Pins
These long soft jaws will safely and securely hold your turned edge bowls and large diameter cylinders for finishing the bottoms of those turnings... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #842FLH Fingernail Bowl Gouge
The increased cutting edge of the pronounced fingernail grind allows for "pull" cuts... [read more]   [read 2 reviews and see ratings]

Robert Sorby #330H Texturing and Spiraling System
At one time the spiralling was a technique only practiced by advanced turners... [read more]   [read 3 reviews and see ratings]

PYROGRAPHY WORKBOOK by SUE WALTERS
Sue Walters, internationally renowned Australian pyrographer, teaches you everything you need to know to create stunning pyrography artwork through three step-by-step projects.... [read more]   [read 1 reviews and see ratings]

8 Pc Professional Wood Lathe Chisel Set, M2 Steel, with Wood Case
Set Includes: - 1(in) Skew - 9/16(in) Skew - 9/16(in) Diamond Parting - 1/8(in) Standard Parting - 1/2(in) Round Nose Scraper - 1/4(in) Gouge - 5/8(in) Gouge - 3/4(in) Gouge - Attractive wood box for easy storage - Overall Dimensions(in): 17.5 L x 12.0 W x 1.63 H... [read more]   [read 2 reviews and see ratings]

Proxxon 27023 Turning Tool Set in Box, 5-Piece
Proxxon german precision 5-piece high speed steel turning tool set, designed for use with DB250 number 37020 micro woodturning lathe... [read more]   [read 3 reviews and see ratings]

PSI Woodworking Products LABAR4M33 Lathe Spindle Adapter for a M 33 by 3.5 mm Spindle to 1-1/2-Inch by 8TPI Chuck
This adapter will convert your lathe spindle from M 33 by 3.5 mm to 1-1/2-Inch by 8TPI male thread.... [read more]   [read 2 reviews and see ratings]

Crown 295 Miniature Turning Tool Set, 5 Piece
This very popular set of miniature tools with 3-3/4-Inch 95mm H.S.S... [read more]   [read 2 reviews and see ratings]

Crown 268W Multi-Tip Scraper
Developed to offer the full range of scraper shapes on one handle, with round, square, and pear shaped cutters... [read more]   [read 1 reviews and see ratings]

Termite
Using a unique beveled, circular cutting tip, this revolutionary tool makes fast, deep, controlled hollowing cuts in end grain quickly and easily... [read more]   [read 1 reviews and see ratings]

Lathe Duplicator
Create precise duplicates of spindles, table legs, and other turned projects... [read more]   [read 2 reviews and see ratings]

Termite Replacement Tip #2
Termite replacement tip #2 is 7/16" diameter... [read more]   [read 2 reviews and see ratings]

5pc. Robert Sorby #45HS Micro Turning Tool Set
Each tool in this 5 piece micro turning set from Robert Sorby - down to the delicate 1/16" parting tool - has been perfectly scaled down for miniature turning work... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #812H Spindlemaster
Turn beads or coves, plane or trim end grain, with one tool... [read more]   [read 3 reviews and see ratings]

3/4" Robert Sorby #812H Spindlemaster
Use the Spindlemaster to turn beads or coves, plane or trim end grain, with one tool... [read more]   [read 1 reviews and see ratings]

3/8" Robert Sorby #840FH Fingernail Spindle Gouge
Ideal for fine detailing in spindle work... [read more]   [read 1 reviews and see ratings]

3/8" Robert Sorby #840H Spindle Gouge
Detailing tool used for between center work where the grain runs parallel to the lathe bed... [read more]   [read 1 reviews and see ratings]

1/4'' Robert Sorby #840H Spindle Gouge
Specifically produced for turners who understand the nuances of the craft, these are detailing tools used on between-center work, where the grain is running parallel to the bed bars... [read more]   [read 1 reviews and see ratings]

1" Robert Sorby #809H Oval Skew Chisel
The Oval Skew is a delicately balanced tool that is the "plane" of a turner's tool kit... [read more]   [read 4 reviews and see ratings]

Robert Sorby RS200KT Multi-Tip Shear Scraper
The Robert Sorby RS200KT is a multi-purpose turning tool that comes packaged with three replaceable cutters - two for hollowing, one for scraping... [read more]   [read 5 reviews and see ratings]

1/2" Robert Sorby #840FH Fingernail Spindle Gouge
Ideal for fine detailing in spindle work... [read more]   [read 4 reviews and see ratings]

3/16" Robert Sorby #832H Fluted Parting Tool
This tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face... [read more]   [read 1 reviews and see ratings]

1/16" Robert Sorby #832H High Speed Steel Fluted Parting Tool
The Sorby Fluted Parting Tool has a radical and unique cutting profile with a blade profile width of only 1/16" (2mm)... [read more]   [read 1 reviews and see ratings]

1-1/2" Robert Sorby #8004LH Full Round Heavy Duty Scraper
Massive in section, this tool was designed to reduce vibration and be stable in use... [read more]   [read 2 reviews and see ratings]

Robert Sorby #827H External Shear Scraper
Shear scraping is an enhanced method of woodturning which relies on the presentation of the scraper at an optimum shear angle of 45 degrees... [read more]   [read 1 reviews and see ratings]

Robert Sorby Bedan
Used in the same way as the beading and parting tool.Used in the same way as the beading and parting tool, the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding.... [read more]   [read 1 reviews and see ratings]

MT-2 Adjustable Mandrel
Obtain the perfect mandrel length for any pen kit... [read more]   [read 2 reviews and see ratings]

3/8" Robert Sorby #842LH Bowl Gouge
The bowl gouge is known as the "master tool" for bowl turners... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #842XLH Bowl Gouge
The "master tool" for bowl turners... [read more]   [read 8 reviews and see ratings]

1/4" Robert Sorby #842LH Bowl Gouge
The "master tool" for bowl turners... [read more]   [read 3 reviews and see ratings]

3/8" Robert Sorby #842FLH Fingernail Bowl Gouge
The increased cutting edge of the pronounced fingernail grind allows for "pull" cuts... [read more]   [read 5 reviews and see ratings]

Robert Sorby #410 Sandmaster
The Sandmaster is designed to help turners sand and polish pieces right on the lathe... [read more]   [read 6 reviews and see ratings]

NEW HAND TOOL SET - 8 piece WOOD LATHE CHISELS Tools
BRAND NEW 8 Pc Wood Lathe Chisel Set!Specifications:* Wood Handles* 1' Skew* 1/2" Skew* 1/2" Spearpoint* 1/8" Parting tool* 1/2" Round nose* 1/4" Gouge* 1/2" gouge* 3/4" GougeBRAND NEW CHISELS FOR THE HOME OR SHOP!... [read more]   [read 4 reviews and see ratings]

20 Ft. Sanding Roll Assortment
Cloth-backed, 20 foot rolls of sandpaper nAluminum oxide abrasive in 150, 240, 320, and 400 grit nConvenient 1" width -- no more tearing sheets into strips! nPerfect for finishing work nHandy pull-and-tear storage box nnFour rolls, one each of 150, 240, 320, and 400 grit... [read more]   [read 2 reviews and see ratings]

Crown 242PM 1/2-Inch 13-mm Powder Metallurgy Bowl Gouge
This 1/2-Inch 13-mm Powder Metallurgy Bowl Gouge is one of Crowns exclusive new range of 'elite' Pro-PM turning chisels... [read more]   [read 3 reviews and see ratings]

Crown 240 1/4-Inch 6-mm Bowl Gouge
This quality 1/4-Inch 6-mm Bowl Gouge is hot forged from M2 High Speed Steel (Rockwell 62/64) giving up to six times the edge life of Carbon... [read more]   [read 1 reviews and see ratings]

Crown 242EPM 1/2-Inch 13-mm Powder Metallurgy Ellsworth Gouge
This 1/2-Inch 13-mm Powder Metallurgy Ellsworth Gouge is one of Crowns exclusive new range of 'elite' Pro-PM turning chisels... [read more]   [read 3 reviews and see ratings]

Crown 279B 1/4-Inch 6-mm 80-Degree Bent Square Hollowing Tool
This quality Crown 1/4-Inch 6-mm 80-Degree bent Square Hollowing Tool, perfect for hollowing out small vessels, features an 8-1/2-Inch 216-mm Rosewood handle.... [read more]   [read 1 reviews and see ratings]

Crown 290 High Speed Steel Woodturning Set in Wooden Box, 8-Piece
Each of these eight quality Woodturning Tools from Crown is hot forged from M2 High Speed Steel (Rockwell 62/64) and fitted with ergonomically designed Rosewood handle with heavy duty brass ferrule... [read more]   [read 2 reviews and see ratings]

Crown 236PM 3/8-Inch 10-mm Powder Metallurgy Spindle Gouge
This 3/8-Inch 10-mm Powder Metallurgy Spindle Gouge is one of Crowns exclusive new range of 'elite' Pro-PM turning chisels... [read more]   [read 2 reviews and see ratings]

9'' KC Wire Burner Set
Add crisp detail to your turnings! These unique tools etch out precise decorative lines in all types of wood... [read more]   [read 1 reviews and see ratings]

Bennett Lathe Tool Handles
Use the Bennett Turner's Tool Handle for allyour turning tools... [read more]   [read 2 reviews and see ratings]

Turning Tools product #B002JP9HTE
Robert Craft, the noted conductor and widely respected writer and critic on music, literature, and culture, holds a unique place in the world of classical music... [read more]   [read 3 reviews and see ratings]

Robert Sorby 370/A Micro Spiraling System Complete
A high quality fine steel tool cutter for Sorby's Micro Spiralling System... [read more]   [read 4 reviews and see ratings]

Robert Sorby #370/0 Micro Spiralling Head & Cutters
If you already own any of Sorby's Modular Micro Turning Tool Sets or Micro Tool Handles this Head & Cutter Set will get you into spiralling and texturing techniques on small projects at a reduced cost... [read more]   [read 1 reviews and see ratings]

Robert Sorby Micro Spindle Set
With a durable aluminum handle and three interchangeable blades,this modular set quickly transitions from one turning tool to the next... [read more]   [read 2 reviews and see ratings]

Crown 249 1/2-Inch Oval Skew Chisel
This fine quality Crown 1/2-Inch Oval Skew Chisel is specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped chisels... [read more]   [read 1 reviews and see ratings]

Crown 236SK Alan Beecham Skewchigouge
The 'Alan Beecham' Skewchigouge from Crown is a multi purpose skew/gouge turning tool which can be used on hard or soft woods... [read more]   [read 3 reviews and see ratings]

Crown 243XPM 1-Inch PM Bowl Gouge
This 1-Inch Powder Metallurgy Bowl Gouge is one of Crowns exclusive new range of 'elite' Pro-PM turning chisels... [read more]   [read 1 reviews and see ratings]

5/16" Sq. Shank, 2 1/4" O.A.L., C-5 Grade, Tool #AL-5, AR & AL Style Carbide Tipped Straight Turning Tool (1 Each)
Straight Turning Tools AR & AL Styles... [read more]   [read 1 reviews and see ratings]

Turning Tools product #B002UFWYFC
Robert Baksa is a composer of distinct personality... [read more]   [read 5 reviews and see ratings]

Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe
Featuring a ball-bearing live center, heavy-duty steel knockout bar, and onboard storage for easy access to adjustment tools, the Delta 46-460 industrial 12-1/2-inch variable-speed midi lathe handles even heavy-duty jobs with ease... [read more]   [read 79 reviews and see ratings]

Steelex D1088 Cast Iron Face Plate
Our 8" diameter cast iron Face Plate features the exclusive modular insert design, which allows it to mount to a wide variety of lathe models... [read more]   [read 2 reviews and see ratings]

3/8" Spindle Gouge
These high-quality turning tools are designed to meet the needs of any skill level woodturner, from beginner to demanding professional... [read more]   [read 1 reviews and see ratings]

3/4" Roughing Gouge
These high-quality turning tools are designed to meet the needs of any skill level woodturner, from beginner to demanding professional... [read more]   [read 1 reviews and see ratings]

1/8" Diamond Parting Tool
These high-quality turning tools are designed to meet the needs of any skill level woodturner, from beginner to demanding professional... [read more]   [read 1 reviews and see ratings]

3/4" Robert Sorby #843GH Roughing Gouge
For the initial shaping of rough stock into round... [read more]   [read 2 reviews and see ratings]

1/4" Robert Sorby #830H Parting Tool Blade
The Robert Sorby Standard Parting Tool blade is for turners who prefer to make their own turning tool handles, or for use in Sorby's Sovereign System handles... [read more]   [read 1 reviews and see ratings]

3/8" Robert Sorby #834H Bedan
The Sorby Bedan Tool is used in the same way as a beading and parting tool... [read more]   [read 1 reviews and see ratings]

3/16" Robert Sorby #831H Diamond Parting Tool
Sorby's Standard 1/8" wide tool for parting off finished work from the waste material... [read more]   [read 1 reviews and see ratings]

1-1/4" Robert Sorby #809H Oval Skew Chisel
The Oval Skew is a delicately balanced tool that is the "plane" of a turner's tool kit... [read more]   [read 1 reviews and see ratings]

3/8" Robert Sorby #833H Beading & Parting Tool
The Sorby Beading & Parting Tool is a versatile tool used for parting off as well as producing beads... [read more]   [read 1 reviews and see ratings]

3/8" Robert Sorby #840FH Fingernail Spindle Gouge
Ideal for fine detailing in spindle work... [read more]   [read 1 reviews and see ratings]

1-1/2" Robert Sorby #8008LH Bowl Finishing Inboard Scraper
The massive profile provides the stability and vibration reduction necessary for achieving a silky smooth final finish on turnings... [read more]   [read 2 reviews and see ratings]

3/8" Robert Sorby #835H Bead Forming Tool
This razor-edged tool forms perfect, identical 3/8" beads, one right after the other... [read more]   [read 1 reviews and see ratings]

1" - 400 Grit (10 pk.) Robert Sorby #411A Sandmaster
High quality 1" diameter x 400 grit hook & loop abrasives for the Sorby Micro Sandmaster... [read more]   [read 1 reviews and see ratings]

1/4" Robert Sorby #840H Spindle Gouge
Detailing tool used for between center work where the grain runs parallel to the lathe bed.nnCreate coves, beads, and other profiles... [read more]   [read 1 reviews and see ratings]

Simple Shear Cutting Finisher - Carbide Wood Turning & Hollowing Tool with 16mm (5/8") Handle
Simple Shear Cutting FinisherTM Carbide Tipped Lathe Tool... [read more]   [read 26 reviews and see ratings]

Hunter #3 Shallow Swan Neck Carbide Hollowing Tool
Tired of tough bowl blanks that quickly dull your edges? Have you hesitated to start on a burl because you know what the dirt in it will do to your tools? The Hunter Hollowing Tools, with their unique carbide cutters, are the solution to your problems... [read more]   [read 1 reviews and see ratings]

6pc. Robert Sorby #67HS Beginners' Turning Tool Set
Specially selected as a true starter set, these 6 full size turning tools from respected maker, Robert Sorby, give the new turner an excellent basic set of high quality tools that will give the flexibility to handle both bowl and spindle turning with few restrictions.nnSet Includes:n- 3/4" Roughing Gouge - Rough turn square stock to roundn- 3/8" Spindle Gouge - For detailing spindlesn- 3/8" Bowl Gouge - A must tool have for shaping bowlsn- 3/4"Oval Skew - For planing, detailing, and beading spindle workn- 1/2" Round Scraper - Excellent for hollowing goblets and boxes, and shear scrapingn- 1/8" Parting Tool - Parts off stock at the end and adds details to the work.nnTools in the set range from approximately 14-1/4" to 19-1/4" in overall length... [read more]   [read 1 reviews and see ratings]

CROWN PRO-PM 1/2" Skew Chisel
Powder metallurgy is not new to turning tools, but until now the available tools were expensive... [read more]   [read 1 reviews and see ratings]

Hunter #4 Carbide Hollowing Tool
Tired of tough bowl blanks that quickly dull your edges? Have you hesitated to start on a burl because you know what the dirt in it will do to your tools? The Hunter Hollowing Tools, with their unique carbide cutters, are the solution to your problems... [read more]   [read 1 reviews and see ratings]

Robert Sorby #370/A Micro Spiraling System Complete
A high quality fine steel tool cutter for Sorby's Micro Spiralling System... [read more]   [read 1 reviews and see ratings]

HUT Crystal Coat
Crystal Coat is a liquid friction finish that produces a glass like surface on wood in seconds... [read more]   [read 3 reviews and see ratings]

8pc. Robert Sorby #82HS Turning Tool Set
The pro's choice for 100 years! The incredible special Sorby HSS steel in the blades of this full size 8 piece set holds a hair-splitting edge when others have dulled to uselessness... [read more]   [read 5 reviews and see ratings]

Robert Sorby #87HS3T Micro Hollowing Set Complete
With the inclusion of a specifically designed Micro Boring Tool for initial waste removal, a Micro Swan Neck Hollowing Tool and a Micro Round Nose Scraper, this modular interchangeable blade hollow turning tool set from Sorby gives turners the ability to hollow out delicate vases and other small hollow objects.nnThe working length of the high speed steel tool blades ranges from approximately 2-3/4 to 3", making them ideal for the turner producing miniature boxes or hollow forms... [read more]   [read 4 reviews and see ratings]

2" - 240 Grit (10 pk.) Robert Sorby #412A Sandmaster
High quality 2" diameter x 240 grit hook & loop abrasives for the Sorby Sandmaster... [read more]   [read 1 reviews and see ratings]

SORBY Hollow Master, Full-Sized
The full-sized Sorby Hollow Master features a flat bottom for increased stability and control during your woodturning projects... [read more]   [read 3 reviews and see ratings]

5pc. Robert Sorby #55HS Beading Tool Set
This 5 piece set of razor-edged turning tools from Robert Sorby form perfect, identical beads, one right after the other... [read more]   [read 1 reviews and see ratings]

WoodRiver 5-Piece "Mini" HSS Turning Tool Set
This economical High Speed Steel (HSS) set is a perfect companion set for midi and mini lathes, or a great addition to any turners tool kit for smaller turning projects... [read more]   [read 1 reviews and see ratings]

SORBY Hollow Master, Mid-Sized
The Sorby mid-sized Hollow Master has a flat bottom for increased stability and control during your woodturning projects... [read more]   [read 3 reviews and see ratings]

Sorby 16'' Sovereign Handle (SOV-16S)
  [read 2 reviews and see ratings]

3/4" Robert Sorby #842 Bowl Gouge Blade
Many turners prefer to turn their tool handles to their own specifications... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #888/4 Micro Gouge Blade
High quality high speed steel (HSS) Spindle Gouge Blade for the Sorby Modular Micro Tool System... [read more]   [read 1 reviews and see ratings]

Easy Wood Tools Full-Size Easy Rougher Ci1
The beauty of these revolutionary new turning tools is not really the hefty, 15? brightly finished maple handles, but the uniquely designed carbide cutters... [read more]   [read 12 reviews and see ratings]

Ci3 Mini Finisher
Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents... [read more]   [read 4 reviews and see ratings]

3/8" Robert Sorby #840F Fingernail Spindle Gouge Blade
Many turners prefer to turn their tool handles to their own specifications... [read more]   [read 4 reviews and see ratings]

Ci2 Easy Rougher Midi with Easy Grip Handle
Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents... [read more]   [read 1 reviews and see ratings]

3/4" Robert Sorby #8427 Texan Bowl Gouge Blade
Many turners prefer to turn their tool handles to their own specifications... [read more]   [read 1 reviews and see ratings]

Ci0 Easy Finisher w/Easy Grip Handle
The beauty of these revolutionary new turning tools is not really the hefty, 15? brightly finished maple handles, but the uniquely designed carbide cutters... [read more]   [read 14 reviews and see ratings]

Ci2 Mini Rougher
Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents... [read more]   [read 3 reviews and see ratings]

3/8" Robert Sorby #842 Bowl Gouge Blade
Many turners prefer to turn their tool handles to their own specifications... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #840F Fingernail Spindle Gouge Blade
Many turners prefer to turn their tool handles to their own specifications... [read more]   [read 2 reviews and see ratings]

Woodcraft Turning Tool Roll
Our exclusive new tool roll provides a place to keep and protect up to 12 full-sized turning tools... [read more]   [read 3 reviews and see ratings]

1" Robert Sorby #812H Spindlemaster
Turn beads or coves, plane or trim end grain, with one tool... [read more]   [read 1 reviews and see ratings]

Ci4 Mini Detailer
Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents... [read more]   [read 3 reviews and see ratings]

3/8" Robert Sorby #842F Fingernail Bowl Gouge Blade
Many turners prefer to turn their tool handles to their own specifications... [read more]   [read 1 reviews and see ratings]

Union Butterfield 727 Tool Bit Blank, Cobalt Steel, 2-1/2" Overall Length, 5/16" Size
  [read 1 reviews and see ratings]

Union Butterfield 707 Tool Bit Blank, High-Speed Steel, 2-1/2" Overall Length, 5/16" Size
  [read 2 reviews and see ratings]

Simple Rougher - Carbide Tipped Square Wood Lathe Scraper Turning Roughing Tool
Simple RougherTM Carbide Tipped Lathe Tool... [read more]   [read 5 reviews and see ratings]

Sorby Sovereign Multi Tip Hollowing Tool
The Sovereign turning system from noted turning tool manufacture Robert Sorby, offers a delicate combination of comfort and balance just where you need it... [read more]   [read 1 reviews and see ratings]

HOLLOWING TOOL SET
These new versatile scrapers, designed specifically for hollow vessel turning, are the absolute best turning tool innovation we have seen in years... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #842F Fingernail Bowl Gouge Blade
Many turners prefer to turn their tool handles to their own specifications... [read more]   [read 1 reviews and see ratings]

Robert Sorby T21652 Sovereign Side Handle
There a several optional extras with the Sovereign System... [read more]   [read 1 reviews and see ratings]

Big Horn 14515 Pen Turning Press
Big Horn's pen turning press is durable and high quality... [read more]   [read 10 reviews and see ratings]

Ci4 Full-Size Detailer
Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents... [read more]   [read 4 reviews and see ratings]

Ci3 Mid-Size Finisher
Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents... [read more]   [read 5 reviews and see ratings]

Ci4 Mid-Size Detailer
Easy Wood Tool Minis - Easy wood has done it again! These mini tools feature all of the same benefits and qualities as their full size parents... [read more]   [read 2 reviews and see ratings]

PSI Woodworking Products CF3J Faceplate 1-Inch by 8TPI 3-Inch Diameter
3-Inch Steel Face Plate, with a 1" x 8 tpi mount... [read more]   [read 26 reviews and see ratings]

Crown Thread Chasing Tool Set 12 T.P.I.
With a little practice, along with the included instructions from Legendary English turner Bill Jones, you can quickly learn to cut threads on boxes or center work... [read more]   [read 1 reviews and see ratings]

Sorby Sovereign Medium Ultima Finishing Cutter Head
Finishing head cutter is to be used with medium sized blade system... [read more]   [read 1 reviews and see ratings]

Robert Sorby SOV-RSULTS Small Ultima Hollowing Blade
A part of Sorby's Sovereign System, but also a stand-alone tool in its own right when installed in Sovereign handle... [read more]   [read 1 reviews and see ratings]

Robert Sorby #RS215KT Chatter Tool Kit
Acts as both a shear scraper and a decorating tool... [read more]   [read 3 reviews and see ratings]

WoodRiver Deluxe Self Centering Pen and Bottle Stopper Drilling Vise
The unique design of this vise assures the jaws clamp firmly and quickly and remain both parallel to each other and square to your drill press table... [read more]   [read 5 reviews and see ratings]

Robert Sorby #RS220 Square & Pointed Chatter Cutter
Replacement cutter used on the Sorby Chatter Tool (RS215KT) and the Sorby RS2000 Hollowing System.nnMade in England.... [read more]   [read 1 reviews and see ratings]

Robert Sorby #RS112C Midi Point Tip
High Speed Steel replacement tip for Sorby Hollowing Tools... [read more]   [read 1 reviews and see ratings]

PSI Woodworking Products LCMBEAD8 Finger Grip Bead Chisel
Add a little flare, style and functionality to your pens with this precision Finger Grip chisel... [read more]   [read 5 reviews and see ratings]

PSI Woodworking Products PKMSTS2 2 MT Live Mandrel Saver
Are you tired of bending your Mandrel and ruining the point on your live center? If so, then this fail-safe live center accessory is for you... [read more]   [read 42 reviews and see ratings]

PSI Woodworking Products LABAR418 Lathe Spindle Adapter for a 1-Inch by 8TPI Spindle to 1-1/2-Inch by 8TPI Chuck
This adapter will convert your lathe spindle from 1" x 8 tpi to 1-1/2" x 8 tpi male thread... [read more]   [read 4 reviews and see ratings]

PSI Woodworking Products DIAMOND4 4-Piece Sharpening Set
PSI Woodworking Products offers # DIAMOND4, a 4-Piece Sharpening Set... [read more]   [read 2 reviews and see ratings]

PSI Woodworking Products LTCA18 Live Tailstock Chuck Adapter 1-Inch by 8TPI Male Thread Mounting to a 2 MT
Live Tailstock Chuck Adapter-2MT tailstock mount, 1-Inch by 8TPI Chuck Mount... [read more]   [read 12 reviews and see ratings]

PSI Woodworking Products TM32 1/2-Inch Diameter Drill Chuck with a 2 MT Mount
#2 Morse taper mount for Delta, Jet, PSI, and other Midi lathe headstocks and tailstocks... [read more]   [read 52 reviews and see ratings]

PSI Woodworking Products LCDOWEL Dowel Collet Chuck System
Get precision gripping and centering of small diameter dowels and tenons... [read more]   [read 21 reviews and see ratings]

PSI Woodworking Products TM32KL Keyless 1/2-Inch Drill Chuck with a 2 MT Mount
The feature of PSI woodworking products TM32KL Keyless 1/2-Inch Drill Chuck with a 2 MT Mount will hold drill bits up to 1/2-Inch in diameter , drill chuck mounts in the 2 MT... [read more]   [read 53 reviews and see ratings]

PSI Woodworking Products LCMBSET Multi Bead Chisel, 2-Piece set
Benjamin's Best 2-Piece High Speed Steel Multi-Bead cutting Chisel Set-16-Inch long... [read more]   [read 2 reviews and see ratings]

Robert Sorby #320 Spiralling Tool
A further development of Sorby's texturing tool, the spiraling tool can be used to create both left and right handed spirals, barley twists, rope effects, flutes, and even checkered patterns with ease.nnThe innovative rest on the tool has indexed reference positions, which enable the replication of the spirals.nnDiffering pitch and twist profiles are made possible by altering the presentation angle of the cutter or by changing the cutter to a different one.nnTool has an 11" long ash handle and is approximately 16" long overall.nnSpiralling Tool: Includes the Spiralling Tool with graduated rest; 4mm spiralling cutter; and an instruction sheet... [read more]   [read 1 reviews and see ratings]

Robert Sorby #973 Thread & Sizing Gauge
Ideal for box makers, this gauge takes all the guesswork out of dimensioning projects when cutting threads on the lathe.nnWith the gauge set at the unmarked anvil this creates a 1:1 correlation between the measuring faces and facilitates accurate push fits.nnThe other three anvils are marked 10, 16, and 20, which relates to the most common tpi (threads per inch) used by thread cutters.nnThe gauge has a built-in compensation factor to ensure a perfect, thight thread fit between the internal and external diameters everytime... [read more]   [read 1 reviews and see ratings]

Robert Sorby #36HS 3pc. Pen Making Set
Each piece has been specifically designed for pen turning.nnSet includes: 5/16" roughing gouge; 1/16" parting tool; and a 1/2" SpindleMaster... [read more]   [read 3 reviews and see ratings]

Robert Sorby #854 Hollowing Tool Wall Thickness Gauge
Designed to be used on the Large Curved (Swan Necked) Tool in Sorby's 3 Pc... [read more]   [read 2 reviews and see ratings]

Robert Sorby #472 Cutting Tip Holder
An inexpensive yet indispensible little sharpening accessory.nnIt is double ended to allow you to hold comfortably almost every Sorby tool tip without fear of catching the cutting tip or, even more importantly, your finger, in a sharpening belt or grinding wheel... [read more]   [read 4 reviews and see ratings]

Robert Sorby #970 Sizing Tool
Used with a parting tool to obtain accurate and consistent turning diameters up to 3" on spindle work.nnWorks with Sorby's 1/4" Standard Parting Tool and 3/8" Beading & Parting Tool.nnParting Tools sold separately... [read more]   [read 1 reviews and see ratings]

8-1/2" Robert Sorby #9785 Inside/outside Caliper
An indispensible addition to the turner's tool kit, inside/outside calipers are ideal for both measuring wall thicknesses and dimensional measurements such as aperture size.nnUsing calipers while turning will increase the accuracy of measurment readings and transfers and speed the turning processnnThe mirror image design of the caliper automatically transfers the measuement taken at one end to the opposite end so that you can take an accurate reading without removing the caliper from the work.nnThe calipers are made from plated steel for corrosion resistance and have a friction fit adjustment point.nnLeg length is 8-1/2"... [read more]   [read 1 reviews and see ratings]

2" Robert Sorby #412A120 Sandmaster 120 Grit Sanding Disc 10 pack
High quality 2" diameter x 120 grit hook & loop abrasives for the Sorby Sandmaster... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #810H Skew Chisel
Skews are superb for large spindle work, such as kitchen table legs or newel posts... [read more]   [read 1 reviews and see ratings]

3/4" Robert Sorby #835H Bead Forming Tool
This razor-edged tool forms perfect, identical beads, one right after the other... [read more]

Robert Sorby #826C Spare Cutter for 826H Internal Shear Scraper
Full round replacement cutter for Sorby's 826H Internal Shear Scraper... [read more]   [read 1 reviews and see ratings]

5/8" Robert Sorby #835H Bead Forming Tool
This razor-edged tool forms perfect, identical beads, one right after the other... [read more]

1/2" Robert Sorby #835H Bead Forming Tool
This razor-edged tool forms perfect, identical 1/2" beads, one right after the other... [read more]   [read 1 reviews and see ratings]

1/4" Robert Sorby #842FLH Fingernail Bowl Gouge
The increased cutting edge of the pronounced fingernail grind allows for "pull" cuts.nnThe greater cutting tip area can be used for heavy profiling cuts and fine, delicate, shearing cuts.nnHSS blade... [read more]   [read 1 reviews and see ratings]

1/4" Robert Sorby #864H Micro Skew Chisel
A small skew sized for the delicacy and control required for smaller projects and fine detail work.nnSkew has a 6-1/4" handle and is 10" long overall... [read more]   [read 1 reviews and see ratings]

5/16" Robert Sorby #866H Micro Roughing Gouge
A smaller Rouging Gouge sized for the delicacy and control required for smaller projects and fine detail work... [read more]   [read 1 reviews and see ratings]

1/16" Robert Sorby #870H Micro Fluted Parting Tool
A very fine Parting Tool sized for the delicacy and control required for smaller projects and fine detail work... [read more]   [read 1 reviews and see ratings]

1/4" Robert Sorby #888/10 Micro Tool Curved Undercut Scraper Blade
High quality high speed steel (HSS) Curved Undercut Scraper Blade for Sorby's Micro Tool System... [read more]   [read 1 reviews and see ratings]

Robert Sorby #895H Relief Cutting Tool
The Relief Tool is used in conjunction with Sorby's Thread Cutting Tools (10, 16, and 20 TPI)... [read more]   [read 1 reviews and see ratings]

1/4" Robert Sorby #888/12 Micro Tool Diamond Undercut Scraper Blade
High quality high speed steel (HSS) Diamond Undercut Scraper Blade for Sorby's Micro Tool System... [read more]   [read 1 reviews and see ratings]

Robert Sorby #890H/16 Pair of Thread Cutters - 16TPI
Used to make lidded boxes and other threaded turnings, Sorby's threading tools bring a tremendously fascinating feature to projects.nnThe tools have a unique enhanced helix angle design specifically for use in wood, so you can be assured of smooth and precise results... [read more]   [read 4 reviews and see ratings]

Robert Sorby #9011XL Woodturners Smock Size XL
When the shavings start to fly, they can go everywhere, including on, or even worse, inside your clothes.nnSorby's traditional smock has a snug fitting elasticized neck and cuffs stop shavings, chips, and dust... [read more]   [read 1 reviews and see ratings]

Robert Sorby #9011L Woodturners Smock Size L
When the shavings start to fly, they can go everywhere, including on, or even worse, inside your clothes.nnSorby's traditional smock has a snug fitting elasticized neck and cuffs stop shavings, chips, and dust... [read more]   [read 2 reviews and see ratings]

Robert Sorby #89HS16 Thread Cutting Set - 16TPI
This starter package will give you a great foundation for learning to cut threads on turned objects... [read more]   [read 1 reviews and see ratings]

Robert Sorby #9011XXL Woodturners Smock Size XXL
When the shavings start to fly, they can go everywhere, including on, or even worse, inside your clothes.nnSorby's traditional smock has a snug fitting elasticized neck and cuffs stop shavings, chips, and dust... [read more]   [read 3 reviews and see ratings]

Robert Sorby #DRCK/2 Hollow Revolving Center Set 2 MT
An excellent center set for turning small to mid-size projects... [read more]   [read 1 reviews and see ratings]

1/2" Robert Sorby #RCSTB250 Revolving Stebcentre #2 MT
Inspired by Norwegian master turner Petter Herud, this Revolving (or Live) version of the Stebcentre allows the turner to experiment with off-center or eccentric turning.nnThese revolutionary spur drives combine a spring loaded center point with a ring of razor sharp teeth... [read more]   [read 1 reviews and see ratings]

Robert Sorby #RS213C Large Tear Drop Shear Scraper
High Speed Steel replacement tip for Sorby Hollowing Tools... [read more]   [read 1 reviews and see ratings]

Robert Sorby #RS224 Diamond Sharpening File
A little honing done periodically can do wonders to improve the performance and useful life of cutting tools.nnThis flexible and verstile toool gets into hard to reach areas on router bits, and also works well for touching up turning and carving tools, knives, and scissors... [read more]   [read 2 reviews and see ratings]

Robert Sorby #VDRS03 Decorative Techniques DVD
This inspiring, instructive, and informative DVD opens up a whole world of decorative possibilities for the turner who wishes to add extra character to their work.nnIt introduces a number of unique Sorby tools for texturing, spiralling, and chatterwork, as well as demonstrating the first steps in the exciting world of off-center turning.nnPacked with useful advice on tool usage, including many close-ups of tools in use, sharpening, wood selection and finishes, together with invaluable tips on woodturning in general.nnThis DVD is a must for those seeking to enhance their appreciation of workpiece decoration... [read more]   [read 1 reviews and see ratings]

Robert Sorby #VDRS07 Specialist Woodturning Tools DVD Part 1`
For many years Robert Sorby have developed exciting and innovative tools for the turner... [read more]   [read 1 reviews and see ratings]

PSI Woodworking Products LCENTSET 7-Piece Multi Spur Drive Center Set With A 1-Inch by 8 TPI Mount
You will now always have the right center available for any spindle mounting application... [read more]   [read 8 reviews and see ratings]

PSI Woodworking Products LCMASET Benjamin's Best Master-Turn Handle System
Long and strong, well balanced, well engineered and priced hundreds of dollars less than similar systems... [read more]   [read 2 reviews and see ratings]

Nikcole SET 5 Mini-Groove Kit, 1/2" Shank toolholder plus 5 coated carbide grooving inserts .035-.073"
The Nikcole mini-system is designed for cut-off and grooving under .078"... [read more]   [read 2 reviews and see ratings]

The Bullzeye Woodturners Center Finder
Templates make tasks much easier, and this one is no exception... [read more]   [read 9 reviews and see ratings]

Turning Tools product #B00512YMII
  [read 1 reviews and see ratings]

Robert Sorby SOV-22S-ULTM Medium Ultima Hollowing System
A part of Sorby's Sovereign System, but also a stand-alone tool in its own right, the Medium Ultima System enables woodturners to produce hollow forms up to 16" in both wet and dry woods.nnIt has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging... [read more]   [read 1 reviews and see ratings]

Hollow Roller
The Hollow Roller easily attaches to almost any size lathe by purchasing the appropriate size adapter stud (sold separately)... [read more]   [read 1 reviews and see ratings]

8 Piece Wood Lathe Turning Tool Kit with Carrying Folding Pouch
Made of heavy duty triple tempered tool steel, the 4-1/2" long precision ground tips let you to turn out work like a master craftsman.... [read more]   [read 1 reviews and see ratings]

Delta 46-626 Set of 6 Lathe Turning Tools
Set of 6 high speed steel lathe turning tools complete in wooden case.... [read more]   [read 1 reviews and see ratings]

Anytime Tools 3/8" C6 Carbide Insert for Indexable Lathe Toolholder TCMT110204, 5-Pack
C6 Carbide indexable lathe bit insertsInserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides)... [read more]   [read 2 reviews and see ratings]

Anytime Tools 1/4" C6 Carbide Insert for Indexable Lathe Toolholder TCMT090204, 5-Pack
C6 Carbide indexable lathe bit insertsInserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides)... [read more]   [read 1 reviews and see ratings]

Hollowing System wood bowl carbide lathe turning tool
This shows the exact position of the carbide cutting tool giving precise control of the vessel wall thickness during turning.nnIncludes everything shown in the first photo... [read more]   [read 1 reviews and see ratings]

Milescraft 4700 Turners Press for Joining Pens and Other Turned Projects of All Types
The best press for assembling mechanical components into turned pens and similar projects... [read more]   [read 45 reviews and see ratings]

Carter Hollow Roller™ Vessel Turning System
Hollowing out a vessel or bowl just got a lot safer and easier with the Carter Hollow Roller™ Vessel Turning System! The patent pending system uses a captive bar tool allowing you to focus on your work, and safely turn hollow forms and bowls using your own gouges and scrapers... [read more]   [read 2 reviews and see ratings]

Mid-Size Easy Hollower No. 3
The third and final stage of turning a hollow form is to remove the remaining material located between the 6 oclock to 9 oclock positions, or from under the lip of the opening to just through the curve of the vessel... [read more]   [read 1 reviews and see ratings]

Mid-Size Easy Hollower No. 1
The first stage in turning a hollow form is to begin removing the bulk of the material from the center of the vessel... [read more]   [read 1 reviews and see ratings]

Interchangeable Handle for Carbide Tipped Wood Lathe Turning Tools with Foam Grip
The American made Interchangeable turning tool handle accepts all Harrison Specialties Simple Wood Turning Tools, or other tools with a 1/2" diameter tang.nnFeatures include:nnComfortable foam rubber grip over a solid aluminum core.nOverall length 17"nOutside Diameter 1-3/8"nOpening for tool 1/2" diameternTools are easily changed by loosening the two stainless steel Allen set screwsnAllen wrench includedn Proudly Made in America right here in St... [read more]   [read 5 reviews and see ratings]

5 Piece 5/16" Mini Lathe Indexable Carbide Insert Tool Bit Set
Top quality indexable lathe bits, with replaceable tips!nInserts can be rotated to a new cutting edge without changing the position of the tool holder (each has three sides)... [read more]   [read 1 reviews and see ratings]

2" Mini Lathe Chuck 3-jaw Self-centering with 3/4"X16 Thread
  [read 1 reviews and see ratings]

Woodworking Morse Taper #1 Live Center Mt1
Made of hardened steel and precision ground for accuracy.... [read more]   [read 3 reviews and see ratings]

Grizzly H0507 20-Inch Swan Neck Hollowing Too Length
These tools are suitable for blind turning or undercutting where reach is restricted... [read more]   [read 1 reviews and see ratings]

Grizzly T10255 Mini Lathe Too Length Kit
This convenient Mini Lathe Tool Kit includes right, left and straight turning tool holders with 1/8" HSS tool bits, boring bar with holder and 1/8" HSS tool bit, cut off tool holder with 3/32" HSS blade and 3/8" shank, mini cut off tool holder with 1/16" HSS blade and 5/16" shank, knurling tool holder with pivoting head, single horizontal/vertical knurling tool holder and assorted hex wrenches... [read more]   [read 1 reviews and see ratings]

Central Machinery 12'' x 33-3/8'' Wood Lathe with Reversible Head
Turn high quality woodworking projects with this wood lathe This high quality wood lathe is ideal for crafts, hobbies and - Visit Harbor Freight Tools For More Information.... [read more]   [read 1 reviews and see ratings]

Package of 4 Carbide Wood Turning Tools with Interchangeable Lathe Tool Handle
This package contains all four American made Simple Wood Turning ToolsTM shown in the pictures, plus the interchangeable lathe tool handle with foam grip.nnHere are the tools included in this package:nnSimple Shear Cutting Finisher - The carbide tipped wood turning tool that leaves an excellent finish.nnSimple RougherTM - For roughing and profiling... [read more]   [read 2 reviews and see ratings]

Package of 4 Carbide Wood Turning Tools with Interchangeable Lathe Tool Handle
This package contains all four American made Simple Wood Turning ToolsTM shown in the pictures, plus the interchangeable lathe tool handle with foam grip.nnHere are the tools included in this package:nnSimple Shear Cutting Finisher - The carbide tipped wood turning tool that leaves an excellent finish.nSimple RougherTM - For roughing and profiling... [read more]   [read 11 reviews and see ratings]

Robert Sorby #86HS Handled Micro Pen Turning Set
Specially selected set for pen turners.nnTurning Set: Includes an an aluminium Modular Handle; plus the 1/2" Micro Roughing Gouge, 1/2" Micro Spindlemaster, and 1/16" Micro Parting Tool Blades... [read more]   [read 1 reviews and see ratings]

Hurricane Woodturning Bowl Gouge, High Speed Steel, 1/2" Flute (5/8" Bar Stock)
This is the 1/2" Woodturning Bowl Gouge with a Superflute style shape made from 5/8" High Speed Steel... [read more]   [read 4 reviews and see ratings]

Hurricane Woodturning Bowl Gouge, High Speed Steel, 3/8" Flute (1/2" Bar Stock)
This is the 3/8 " Woodturning Bowl Gouge with a Superflute style shape made from 1/2" High Speed Steel... [read more]   [read 2 reviews and see ratings]

Robert Sorby Sovereign System 12"
The Sovereign is Sorby's brilliant handle and interchangeable tool system, which, coupled with the huge range of accessories and matching tooling, offers turners an extreme level of versatility, flexibility, and customization never before seen.nnAvailable in three basic handle lengths - 12", 16" and 22" - the system not only accepts a wide range of tools specifically designed to match the handles, it will also take any of Sorby's standard un-handled tool blades that have a 5/8" diameter shaft.nnAlso included are 3/8" and 1/2" collets (see note on sizing below) to accept tools with those diameters... [read more]   [read 2 reviews and see ratings]

Hurricane Woodturning Spindle Gouge, High Speed Steel, 1/4" Flute (1/4" Bar Stock)
This is the 1/4" Woodturning Spindle Gouge made from 1/4" High Speed Steel... [read more]   [read 2 reviews and see ratings]

Hurricane Woodturning Square Nose Scraper, High Speed Steel, 3/4" Nose
This is the 3/4" Woodturning Square Nose Scraper made from High Speed Steel... [read more]   [read 3 reviews and see ratings]

Hurricane Woodturning Standard Skew Chisel, High Speed Steel, 1" Skew
This is the 1" Woodturning Skew Chisel made from High Speed Steel... [read more]   [read 5 reviews and see ratings]

Hurricane Woodturning Round Nose Scraper, High Speed Steel, 1" Nose
This is the 1" Woodturning Round Nose Scraper made from High Speed Steel... [read more]   [read 1 reviews and see ratings]

Hurricane Woodturning Roughing Gouge, High Speed Steel, 2" Flute
  [read 6 reviews and see ratings]

Hurricane Woodturning Oval Skew Chisel, High Speed Steel, 3/4" Skew
This is the 3/4" Woodturning Skew Chisel made from High Speed Steel... [read more]   [read 1 reviews and see ratings]

Hurricane Woodturning Round Nose Scraper, High Speed Steel, 1/2" Nose
This is the 1/2" Woodturning Round Nose Scraper made from High Speed Steel... [read more]   [read 2 reviews and see ratings]

Hurricane Woodturning Diamond Parting Tool, High Speed Steel, 3/4" x 3/16", High Speed Steel
This is the 3/4" x 3/16" Woodturning Diamond Parting Tool made from High Speed Steel... [read more]   [read 2 reviews and see ratings]

Crown 1/8" Diamond Parting Tool
Used as a standard parting tool would be, however, the special diamond section of this tool lessens the chance for binding in the cut, and reduces friction and burning.nnBlade is made from M2 High Speed Steel (HSS) and hardened to Rockwell 62-64, thus giving it excellent edge holding ability.nnTool is approximately 15" long over all and has an 8-1/2" long stained beech handle... [read more]   [read 1 reviews and see ratings]

Crown 3/8" Bedan
Similar to to beading & parting tools but with a relieved side bevel to allow it to plunge cut in to boxes and bowls with a greatly reduced risk of binding in the cut... [read more]   [read 3 reviews and see ratings]

Crown 1/2" Combo L&R Captive Ring Tool
Captive rings are one of the truly "neat tricks" in turning... [read more]   [read 1 reviews and see ratings]

Crown Rosewood Plane Handles
These finely made rosewood replacement handles will give that warm personal feel to your hand planes... [read more]   [read 2 reviews and see ratings]

Crown Revolution Complete
From the cryogenically treated cutting tips, to the end of the beautifully weighted handle, the Revolution Turning System is built to be the finest hollowing tool on the market.nnThe modular design matched to articulated tool blades gives the turner the freedom and flexibility to configure the tool for almost any situation... [read more]   [read 2 reviews and see ratings]

Crown Revolution Blade Only
Designed for Crown's modular Revolution Turning System, this articulated Hollowing /Scraping blade gives the turner the freedom and flexibility to configure the tool for almost any situation.nnFrom straight vases to extremely undercut hollow forms, the Revolution has it covered.nnAt the heart of the Revolution System is the fully depth adjustable Super Ring... [read more]   [read 1 reviews and see ratings]

WW Size 0.275 - 40 Tap for Bergeon Levin Etc Watchmaker Lathe Drawbar
Brand new WW size 0.275"- 40 TPI and high quality HSS tap for standard American 8mm watchmaker lathe... [read more]   [read 1 reviews and see ratings]

Crown Revolution Cryogenic 3/8" Spindle Gouge Blade
Spindle gouges are the standard tool for shaping coves, beads, and other details on spindle type work, and this high speed steel blade comes with a singularly huge benefit - cryo treating! nnYears ago tool makers discovered the enormous benefits of cryogenically (super-cold) treated tool cutters, especially plane blades.nnNow this technology has been applied to Crown's Cryo Bowl and Spindle Gouge blades to bring a giant leap in turning tool performance.nnCryo treating cutting tools alters the crystaline molecular form of key ingredients in the metal... [read more]   [read 1 reviews and see ratings]

Crown Revolution Cryogenic 3/8" Bowl Gouge Blade
Bowl gouges are the "go to" tool for general turning and shaping of bowls, platters, and other vessels, and this high speed steel blade comes with a singularly huge benefit - cryo treating! nnYears ago tool makers discovered the enormous benefits of cryogenically (super-cold) treated tool cutters, especially plane blades.nnNow this technology has been applied to Crown's Cryo Bowl and Spindle Gouge blades to bring a giant leap in turning tool performance... [read more]   [read 2 reviews and see ratings]

Crown Revolution Cryogenic 1/2" Spindle Gouge Blade
Spindle gouges are the standard tool for shaping coves, beads, and other details on spindle type work, and this high speed steel blade comes with a singularly huge benefit - cryo treating! nnYears ago tool makers discovered the enormous benefits of cryogenically (super-cold) treated tool cutters, especially plane blades.nnNow this technology has been applied to Crown's Cryo Bowl and Spindle Gouge blades to bring a giant leap in turning tool performance.nnCryo treating cutting tools alters the crystaline molecular form of key ingredients in the metal... [read more]   [read 1 reviews and see ratings]

Easy Wood Tools Pro Series Easy Finisher
Designed for turners who prefer additional length and heft in their tool handles.nnThe Easy Grip Pro Series handle is 20" long and the blade is the same size and length (1/2" x 1/2" x 8-1/2 to 9") as the equivalent type of Easy Woods' full size tools.nnThe strength and beauty of Bubinga makes it an obvious choice for the handles of these Pro level tools.nnThe blade length is 8-1/2" and the overall tool length is approx... [read more]   [read 3 reviews and see ratings]

Easy Wood Tools Easy Smock X-Large
Once you've experienced the blast of shavings that spray off of Easy Wood's razor sharp turning tools you'll appreciate the pure practicality of their short sleeved turning smocks.nnThey will keep you clean and help prevent itchy, uncomfortable chips, shavings, and dust from getting inside your shirt... [read more]   [read 1 reviews and see ratings]

Easy Wood Tools Easy Smock Large
Once you've experienced the blast of shavings that spray off of Easy Wood's razor sharp turning tools you'll appreciate the pure practicality of their short sleeved turning smocks.nnThey will keep you clean and help prevent itchy, uncomfortable chips, shavings, and dust from getting inside your shirt... [read more]   [read 1 reviews and see ratings]

Easy Wood Tools Pro Series Easy Detailer
Designed for turners who prefer additional length and heft in their tool handles.nnThe Easy Grip Pro Series handle is 20" long and the blade is the same size and length (1/2" x 1/2" x 8-1/2 to 9") as the equivalent type of Easy Woods' full size tools.nnThe strength and beauty of Bubinga makes it an obvious choice for the handles of these Pro level tools.nnTool is otherwise identical to the regular Ci4 and accepts the same cutter.nnThe Detailer is used to turn: Finials; Coves; Beads; Detail Grooves; Bowl Tenons; Dovetail cuts for chuck jaws - inside and out; Undercutting; and detail cuts where the cutter will physically fit... [read more]   [read 1 reviews and see ratings]

Hurricane Woodturning Two Piece Skew Chisel Set, 1" Standard Skew Chisel and 3/4" Oval Skew Chisel, High Speed Steel, High Speed Steel
This set consists of two separate Woodturning Skew Chisels made from High Speed Steel... [read more]   [read 3 reviews and see ratings]

Hurricane Woodturning Three Piece Bowl Gouge Set, 1/4" Flute, 3/8" Flute, and 1/2" Flute, High Speed Steel
This set consists of three different Woodturning Bowl Gouges with a Superflute style shape... [read more]   [read 5 reviews and see ratings]

Hurricane Woodturning Two Piece Roughing Gouge Set, 2" Gouge and 1" Gouge, High Speed Steel
This set consists of two separate Woodturning Roughing Gouge mades from High Speed Steel... [read more]   [read 6 reviews and see ratings]

Hurricane Woodturning Four Piece Round Nose Scraper Set, 1/2", 3/4", 1" and 1 1/2", High Speed Steel
This set consists of three separate Woodturning Round Nose Scrapers and one Square End Scraper made from High Speed Steel... [read more]   [read 1 reviews and see ratings]

Hurricane Woodturning Three Piece Spindle Gouge Set, 1/4" Flute, 3/8" Flute, and 1/2" Flute, High Speed Steel
This set set consists of three separate Woodturning Spindle Gouges... [read more]   [read 4 reviews and see ratings]

1/2" Robert Sorby #840G Gold Spindle Gouge Blade
A Sorby High Speed Steel Spindle gouge Blade enhanced with a Titanium Nitride (TiN) coating to dramatically increase it's edge holding ability... [read more]   [read 1 reviews and see ratings]

16x16 Internal Threading Turning Tool Holder for CNC Lathe
Made from Tungsten Carbide material, tough for milling inner hole use... [read more]   [read 1 reviews and see ratings]

Easy Start Rougher 3/8" Carbide Woodturning Tool
Great American Made quality and super sharp EWT Carbide cutters... [read more]   [read 8 reviews and see ratings]

Easy Start Finisher 3/8" Carbide Woodturning Tool
No Sharpening! - No need to spend time sharpening with replaceable carbide cutters... [read more]   [read 8 reviews and see ratings]

Craftsman Wood Lathe Turning Tool 3/4" Roughing Gouge 28591
Craftsman Wood Lathe Turning Tool 3/4" Roughing Gouge 28591nn16" Overall lengthnn10 1/4 '' length of the handle... [read more]   [read 1 reviews and see ratings]

Sorby TurnMaster Teardrop HSS Replacement Cutter
Use the straight side of this cutter for scraping and shear scraping the outside vessels and bowls, while the curved edge is perfect for scraping the interiors of bowls and other forms.... [read more]   [read 1 reviews and see ratings]

Sorby Handled TurnMaster with 3 HSS Cutters
The Sorby TurnMaster is the first tool of its kind to combine three cutting edge technologies into one flexible system... [read more]   [read 3 reviews and see ratings]

Sorby TurnMaster Head - No Cutter
Increase the functionality of the TurnMaster by purchasing extra heads for quick and easy changes for different applications.... [read more]   [read 2 reviews and see ratings]

Sorby TurnMaster Tip Sharpening Holder
Try this TurnMaster Tip Sharpener Holder from Sorby.... [read more]   [read 1 reviews and see ratings]

Simple Turning & Hollowing Carbide Wood Lathe Tool - Bowl Turning Tool
Simple Turner & HollowerTM Carbide Tipped Lathe ToolnThe simplest to use turning & hollowing tool on the market todaynThe introduction of carbide tipped wood turning tools has greatly simplified wood turning.nWith Simple Wood Turning ToolsTM it's all turning and no sharpening so you can start turning immediately... [read more]   [read 4 reviews and see ratings]

Rectangle Shape Metalworking Cutting Lathe HSS Tool Gray 4x12x200mm
This handy mini lathe bit is a great way for any metalworker to add to the versatility of their lathe... [read more]   [read 1 reviews and see ratings]

RAND 8PC Wood Lathe Turning Tool Set Tools Chisels
RAND 8 Pc... [read more]   [read 1 reviews and see ratings]

New Rand Universal Steady Rest For Wood/Metal Lathe
This new Rand Steady Rest is the ideal addition to any shop.nThis New Steady rest is specifically designed to fit most twin bed lathes on the market... [read more]   [read 3 reviews and see ratings]

5mm x 20mm x 200mm HSS Tool Cutoff Bit Cutter Boring Bar for Lathes
Parallelogram design.High speed steel tool bit for lathe.Used for fabrication of cutting tools for milling, turning, parting, engraving, drilling, punching, etc.... [read more]   [read 1 reviews and see ratings]

Lathe High Speed Steel HSS Tool Bit Milling Cutter 4mm x 16mm x 200mm
Parallelogram design.High speed steel tool bit for lathe.Used for fabrication of cutting tools for milling, turning, parting, engraving, drilling, punching, etc.... [read more]   [read 2 reviews and see ratings]

Robert Sorby RSTM-HT123 TurnMaster Handled with Round, Detail Point, & Square HSS Cutters
The handled version of Sorby's versatile TurnMaster Tool with all three (round, detail point, and square) of their primary high speed steel cutters (HSS).nnThe Robert Sorby TurnMaster is the first wood turning tool in the world to combine three cutting edge technologies in one amazingly versatile tool... [read more]   [read 3 reviews and see ratings]

Grizzly T25420 Excelsior Teardrop/Inside/Outside Cutter
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting-edge technologies in one flexible tool... [read more]   [read 1 reviews and see ratings]

Easy Wood Tools T25728 Easy Start Detailer
The Easy Detailer tools really pick up where other tools leave off and provide another level of woodturning creativity as the unique diamond cutter shape fits in tight places where the cutters on the other tools will just not fit... [read more]   [read 2 reviews and see ratings]

Robust 12" Interior Curved Woodturning Tool Rest
Robust tool rests are possibly the finest tool rests ever designed for woodturning... [read more]   [read 1 reviews and see ratings]

Robust 12" Wide Comfort Woodturning Tool Rest
Robust tool rests are possibly the finest tool rests ever designed for woodturning... [read more]   [read 1 reviews and see ratings]

Robust 12" Exterior Curved Woodturning Tool Rest
Robust tool rests are possibly the finest tool rests ever designed for woodturning... [read more]   [read 1 reviews and see ratings]

Robust 6" Wide Comfort Woodturning Tool Rest
Robust tool rests are possibly the finest tool rests ever designed for woodturning... [read more]   [read 1 reviews and see ratings]

Crown 246X 1/8-Inch Diamond Parting Tool
Fine quality Crown 1/8-Inch 6mm Diamond Parting Tool... [read more]   [read 1 reviews and see ratings]

Crown 245 1/4-Inch 6mm Parting Tool
Fine quality Crown 1/4-Inch 6mm Parting Tool gives turners a real choice... [read more]   [read 1 reviews and see ratings]

Powerextra™ Makita 18v 4500mAh Cordless Tool Rechargeable Battery for Makita 1830 194205-3 194309-1 BL1815 BL1830 LXT400
About Powerextra™:Powerextra™ is specialized in manufacturing power tool batteriesPowerextra™ products are made with the highest quality materials.Our products are CE certified, tested by manufacturer to match and/or exceed specifications of OEM products.Compatible with:(Please use "Ctrl + F" )BJV180, BJV180Z,BPB180, BPB180Z,BSS501, BSS501Z,BSS610,BSS610SFE,BSS610X2,BSS610Z,BSS611X,BSS611Z,BTD140, BTD140SFE, BTD140Z,BTD144, BTD144RFE, BTD144Z,BTL061,BTL061Z,BTL063,BTL063Z,BTP140, BTP140Z,BTW251, BTW251Z,BTW253,BTW253Z,BTW450, BTW450Z,BUB182, BUB182Z,BVR350, BVR350Z,BVR450, BVR450Z,DF454DZ,HP454D,HP454DRFX, HP454DZ,HR202D, HR202DRFX, HR202DZK,JR120D, JR120DRF, JR120DZK,ML184(FlashLight), ML184,MR100, MR100W,PB108D, PB108DRFX, PB108DZ, TD144DRFX, TD144DZ,TD251DRFX, TD251DZReplacement PN.:194205-3,194309-1, BL1815,BL1830, LXT400Package Includes :1x battery1x pair of glovesProduct Detials:Battery Capacity:4.5AhBattery Voltage: 18 VBattery Type: Li-ionColor:BlackCondition: Brand NewWarranty :We guarantee to provide brand new high quality replacement batteries with REAL SPECIFICATIONSAll products come with our WonderShop is 30 Days Money Back or Free Exchange against man-made damage from date of purchase and 24 Hours friendly Customer Service!... [read more]   [read 1 reviews and see ratings]

Package of 6 Carbide Wood Turning Tools with Interchangeable Lathe Tool Handle
This package contains all six Simple Wood Turning Tools shown in the pictures, plus our interchangeable lathe tool handle with foam grip.nnHere are the tools included in this package:nnSimple Shear Cutting Finisher - The carbide tipped wood turning tool that leaves an excellent finish.nnSimple RougherTM - For roughing and profiling... [read more]   [read 2 reviews and see ratings]

New Narex (Made in Czech Republic) 4 pc set 6mm (1/4"), 12 (1/2"), 20 (3/4") , 26 (1 1/16") mm Woodworking Chisels
  [read 2 reviews and see ratings]

New Narex (Made in Czech Republic) 8 pc set 6, 8, 10, 12, 16, 20, 26, 32 mm Chisels
  [read 1 reviews and see ratings]

Hurricane Woodturning 2 Piece 5/8" Bowl Gouge Set, High Speed Steel, 1/2" Flute (5/8" Bar Stock)
This set consists of two 5/8" Bowl Gouges, The first is a standard bowl goouge and the second is the Long Reach style which has a shorter flute for added rigidity when turning the inside bottom of a bowl... [read more]   [read 2 reviews and see ratings]

Hurricane Woodturning Long Reach Bowl Gouge, High Speed Steel, 1/2" Flute (5/8" Bar Stock)
This is the 1/2" Woodturning Bowl Gouge with a Superflute style shape made from 5/8" High Speed Steel... [read more]   [read 2 reviews and see ratings]

Package of 6 Carbide Wood Turning Tools with Interchangeable Lathe Tool Handle
This package contains all six Simple Wood Turning Tools shown in the pictures, plus our interchangeable lathe tool handle with foam grip.nnHere are the tools included in this package:nnSimple Shear Cutting Finisher - The carbide tipped wood turning tool that leaves an excellent finish.nnSimple RougherTM - For roughing and profiling... [read more]   [read 2 reviews and see ratings]

Package of 5 Carbide Wood Turning Tools with Interchangeable Lathe Tool Handle
This package contains all five American made Simple Wood Turning ToolsTM shown in the pictures, plus our interchangeable lathe tool handle with foam grip.nnHere are the tools included in this package:nnSimple Shear Cutting Finisher - The carbide tipped wood turning tool that leaves an excellent finish.nnSimple RougherTM - For roughing and profiling... [read more]   [read 1 reviews and see ratings]

Buff Pad 7-1/2" 1-1/2" P Ile Hook Wool New Condition
FAST CHANGE the industry's #1 cutting pad #175C... [read more]   [read 1 reviews and see ratings]

New Narex (Made in Czech Republic) 3 pc set 6 mm, 10 mm, and 12 mm Mortise Chisels
This 3 piece set of mortise chisels is made by a small tool manufacturer in the Czech Republic and is of exceptional quality... [read more]   [read 4 reviews and see ratings]

New Narex (Made in Czech Republic) 10 mm 3/8" Round Cabinetmaker's Rasp
This 10 mm 3/8" round rasp is made by a small tool manufacturer in the Czech Republic and is of exceptional quality... [read more]   [read 1 reviews and see ratings]

Narex (Made in Czech Republic) Square Blade Birdcage Woodworking Scratch Awl
This is a square blade birdcage scratch awl made by a small Czech firm... [read more]   [read 3 reviews and see ratings]

1" x 8tpi Bottle Stopper Mandrel/Chuck with Drill Bit
Specifically designed to turn Bottle Stopper projects... [read more]   [read 1 reviews and see ratings]

10.5mm Square Carbide Cutter, Insert 5-pac with Straight Thru Mounting Hole, Can Be Used on Easy Wood Tools Ci2 and Other Tools Using 10.5 Cutters
This is a 5 piece pack of carbide cutters, inserts manufactured specifically for woodworking and woodturning tools... [read more]   [read 1 reviews and see ratings]

New Narex (Made in Czech Republic) Leather 16 Pocket Tool Roll for Carving Tools or Chisels
This leather tool roll os the perfect solution to organizing and protecting you woodworking chisels... [read more]   [read 1 reviews and see ratings]